5 Style Hood
Exploded view diagram of the 5 Style Hood assembly, illustrating components such as the hood, grill, dash, and various fasteners and brackets, with numbered reference points for identification.
| Ref. No. | Part No. | Description |
| 1 | 710-04484 | Screw 5/16-18 x .750 |
| 2 | 710-04593 | Screw 5/16-18 x .375 |
| 3 | 710-0751 | Hex Screw 1/4-20 x .620 |
| 4 | 712-04064 | Flanglock Nut 1/4-20 |
| 5 | 725-0157 | Cable Tie |
| 6 | 925-0963 | Miniature lamp 12V socket |
| 7 | 731-04949A | Grill Lens |
| 8 | 931-05078B | Dash |
| 9 | 731-05522A | Hood cover |
| 10 | 738-04091A | Shoulder Screw .43 x .29 |
| 11 | 783-05327B-0637 | Suppport Bracket LH |
| 12 | 783-05328A-0637 | Suppport Bracket RH |
| 13 | 783-05454-0637 | Hood pivot bracket |
| 14 | 783-05683-0691 | Hood - Black |
| 783-05683-0662 | Hood - Gray |
| 15 | 783-05685-0691 | Grill - Black |
| 783-05685-0662 | Grill - Gray |
| 16 | 983-04226 | Hydro Assembly |
| 17 | 710-04483 | Screw 1/4-20 x .500 |
| 18 | 710-3144 | Hex Screw 3/8-16 x 2.00 |
| 19 | 711-0736 | Ferrule Adjust |
| 20 | 712-04065 | Flang lock Nut 3/8-16 |
| 21 | 914-0111 | Cotter Pin |
| 22 | 936-0133 | Flat Washer .411 x 1.25 x .100 |
| 23 | 747-04430 | Control Rod, Speed Selector |
| 24 | 750-04465 | Flang Spacer .390 x .671 x 1.095 |
| 25 | 783-04862 | RMC |
| 783-04903 | No RMC |
| 26 | 710-04483 | Screw 1/4-20 x .500 |
| 27 | 710-0599 | Hex Screw Washer 1/4-20 x .500 |
| 28 | 710-0604A | Screw 5/16-18 x .625 |
| 29 | 710-0895 | Hex Screw 1/4-15 x .750 |
| 30 | 712-04063 | Flanglock Nut 5/16-18 |
| 31 | 731-04945 | Support Shaft |
| 32 | 783-04584A-0637 | Gas Tank Support Shaft |
| 33 | 783-04892A-0691 | Dash RMC |
| 34 | 925-04227B | Key Switch Module |
| 35 | 925-1745 | Key |
| 36 | 726-0230 | Cable Tie |
| 37 | 751-0555B | Fuel Tank, 1.5 Gallons |
| 38 | 751-0603A | Fuel Cap |
| 39 | 746-04364 | Throttle/Choke Control Cable |
| 40 | 683-04448 | Battery Rod |
NOTE: Tractor features vary by model. NOT all parts listed above and pictured on the previous page are standard equipment.
Seat and Fender
Exploded view diagram of the Seat and Fender assembly, showing the seat, fender, seat mount brackets, and lift adjuster components, with numbered reference points.
| Ref. No. | Part No. | Description |
| 1 | 710-04483 | Screw, 1/4-20 x .500 |
| 2 | 710-04484 | Screw, 5/16-18 x .750 |
| 3 | 710-0599 | Screw Pan Torx Head, 1/4-20 x .500 |
| 4 | 731-04591A | Cup Holder |
| 5 | 736-0607 | Loack Washer, 5/16 |
| 6 | 783-04593B-0691 | Fender |
| 7 | 783-04843-0637 | Lift Adjuster Bracket |
| 8 | 783-1489C-0637 | Seat Mount Bracket |
| 9 | 710-04482 | Hex Flange, 3/8-16 x .875 |
| 10 | 712-04063 | Flangelock Nut, 5/16-18 |
| 11 | 732-1184 | Extension Spring |
| 12 | 936-0108 | Flat Washer, .510x .750 x .033 |
| 13 | 736-0242 | Bell Washer, .340 x .872 x .060 |
| 14 | 938-0296 | Shoulder Screw, 5/16-18 x .437 x .268 |
| 15 | 783-0209D | Lift Seat Bracket |
| 16 | 783-04081C-0637 | Pivot Seat Manual Adjust Bracket |
| 17 | 726-04072A | Ratchet Clip, .250 x .500 |
| 18 | 735-04047 | Foot Pad, LH |
| 19 | 735-04048 | Foot Pad, RH |
| 20 | 710-0227 | Screw, 8-18 x .500 |
| 21 | 726-0279 | Insulator Plate |
| 22 | 925-1303 | Outer Seat SPring |
| 23 | 725-1439 | Inner Seat Spring |
| 24 | 726-0278 | Insulator Boss Plate |
| 25 | 757-04083 | Medium Back Seat, Black |
| 757-04088 | High Back Seat, Black |
| 26 | 710-0134 | Carriage Screw, 1/4-20 x .62 |
NOTE: Tractor features vary by model. NOT all parts listed above and pictured on the previous page are standard equipment.
Front End Steering
Exploded view diagram of the Front End Steering system, detailing the steering wheel, column, linkage, axle assemblies, and wheels, with numbered reference points.
| Ref. No. | Part No. | Description |
| 1 | 617-04024 | Gear Assembly, Steering |
| 2 | 710-0376 | Screw, 5/16-18, 1.00, Gr5 |
| 3 | 710-0643 | Screw, 5/16-18, 1.00, Gr5, Lock |
| 4 | 710-1309 | Screw, Mach, 5/16-18, 0.750 |
| 5 | 710-3180 | Screw, 5/16-18, 1.75, Gr5 |
| 6 | 912-0240 | Nut, Jam, 7/16-20, Gr2 |
| 7 | 712-0262 | Nut, Jam Lock, 3/8-24, Gr2 |
| 8 | 712-04063 | Nut, Flange Lock, 5/16-18, Grf |
| 9 | 931-0484A | Hub Cap |
| 10 | 923-0448A | Ball Joint, 7/16-20, Lock |
| 11 | 736-0242 | Washer, Bell, .340 x .872 x .060 |
| 12 | 936-0316 | Washer, Flat, .78 x 1.59 x .60 |
| 13 | 738-04141 | Shoulder Screw, .435 x .3485, 5/16-18 |
| 14 | 738-0919A | Steering Shaft, 5/8 Spline x 21.86 |
| 15 | 941-04124 | Bearing, Flange, Hex 5/8 |
| 16 | 941-0475 | Plastic Bushing .380 ID |
| 17 | 747-04298 | Drag Link, Steering |
| 18 | 948-0389 | Cap, 1.25 x .16 |
| 19 | 748-04065-0637 | Steering, Block |
| 20 | 748-04068 | Spacer, .710 ID x .125 OD x .56 |
| 21 | 750-04418 | Spacer, .322 ID x .625 OD x .21 |
| 22 | 783-04644 | Stabilizer Plate, Gear Segment |
| 23 | 938-04007A-0637 | Axle Assmbly LH (38" & 42" Deck) |
| 938-04013 | Axle Assembly, LH (46" Deck) |
| 24 | 638-04008P | Axle Assmbly RH (38" & 42" Deck) |
| 638-04014A-0637 | Axle Assembly, RH (46" Deck) |
| 25 | 719-04177A | Pivot Bar, Cast |
| 26 | 710-04484 | Screw, 5/16-18, 0.750 |
| 27 | 712-04065 | Nut, Flange Lock, 3/8-16, GrF |
| 28 | 714-04039 | Pin, Cotter, 5/32, 1.25 |
| 29 | 914-0474 | Pin, Cotter, 1/8 x 0.75 |
| 30 | 726-04035 | Push Nut 3/4 Dia. |
| 31 | 783-05326-0637 | Pivot Bar Bracket |
| 32 | 736-04228A | Washer, Flat, .781 x 1.59 |
| 33 | 738-04128 | Scr., Shlder, .500 x 2.380, 3/8-16 |
| 34 | 634-04086-0941 | Wheel Ass'y, Sq. Shoulder - Yellow |
| 634-04086-0911 | Wheel Ass'y, Sq. Shoulder - Gray |
| 35 | 747-04299A | Tie Rod |
| 36 | 731-04693 | Push Cap |
| 37 | 731-04040 | Cap, Steering Wheel (sprig logo) |
| 38 | 631-04028 | Steering Wheel, Standard Grip |
NOTE: Tractor features vary by model. NOT all parts listed above and pictured on the previous page are standard equipment.
Transmission
Diagram of the Transmission system, illustrating the hydro transmission, control levers, V-belts, pulleys, and associated hardware, with numbered reference points. Includes an important note regarding the use of factory-approved V-belts.
| Ref. No. | Part No. | Description |
| 1 | 918-04198 | Hydro Transmission |
| 2 | 647-04038A | Hydro Handle Control Assembly |
| 3 | 647-04054A-0637 | Hydro Pedal Assembly |
| 4 | 710-0176 | Hex Screw, 5/16-18:2.75 |
| 710-1266 | Hex Screw, 5/16-18 x 3.5 |
| 5 | 710-0227 | Screw, #8-18:0.500 |
| 6 | 710-0347 | Hex Screw, 3/8-16:1.75 |
| 7 | 710-0351 | Screw, #10-16:0.500 |
| 8 | 710-04484 | Screw, 5/16-18:.750 |
| 9 | 710-0514 | Hex Screw, 3/8-16:1.00 |
| 10 | 710-0604A | Screw, 5/16-18:0.625 |
| 11 | 710-0809 | Screw, 1/4-20:1.250 |
| 12 | 710-1325 | Screw, 1/4-20:1.625 |
| 710-1026 | Screw, 1/4-20 x 1.75 |
| 13 | 710-3008 | Hex Screw, 5/16-18:.75 |
| 14 | 710-3009 | Screw, #10-24:0.750 |
| 15 | 711-04448 | Ferrule, 5/16-24 X .312 DIA. |
| 16 | 912-0346 | Jamlock Nut, 1/2-20 |
| 17 | 712-04063 | Flangelock Nut, 5/16-18 |
| 18 | 712-04065 | Flangelock Nut, 3/8-16 |
| 19 | 914-0104 | Cotter Pin, .072 DIA. X 1.13 LG |
| 20 | 914-0111 | Cotter Pin, 3/32:1.0 |
| 21 | 714-3004 | Cotter Pin, 3/32 X 1.25 |
| 22 | 716-0106A | E Rign, .625 DIA |
| 23 | 720-0311 | Handle Grip |
| 24 | 725-04249 | Hydro Spring Switch |
| 25 | 726-0214 | Push Cap, 5/8 |
| 26 | 926-0320 | Insulator Plate Nut |
| 27 | 731-05299 | Sleeve, .765 ID X 1.500 LG |
| 28 | 731-06098 | Hydro Fan |
| 29 | 732-04225 | Torsion Spring |
| 30 | 732-04229 | Extension Spring, .75 DIA. X 6.02 |
| 31 | 732-0716D | Extension Spring, .59 OD X 4.00 LG |
| 32 | 732-0729 | Wire Ring |
| 33 | 732-0963 | Extension Spring, .50 DIA X 6.37 LG |
| 34 | 735-0239 | Foot Pad, 4.0 |
| 35 | 736-04263 | Lock Washer, TRANS HYDRO |
| 36 | 736-0607 | Lock Washer, 5/16 EXT TOOTH |
| 37 | 936-3008 | Flat Washer, .344 X .750 X .120 |
| 38 | 736-3010 | Flat Washer, .407X.812X.135:HT |
| 39 | 750-0566A | Spacer, .260 x .375 x 1.030 LG |
| 750-04456 | Spacer, .260 x .372 x 1.420 |
| 40 | 938-0347 | Shoulder Spacer, .625 ID X .169 |
| 41 | 738-04178 | Shoulder Spacer, .375 ID X .284 THK |
| 936-0211 | Flat Washer, .285 x 1.25 x .06 |
| 42 | 941-0225 | Hex Flange Bearing |
| 43 | 747-04283A | Declutching Rod |
| 44 | 747-04286 | Brake Rod |
| 747-04679 | Brake Rod, 46" |
| 45 | 747-04296 | Hydro Control Handle |
| 46 | 747-04316 | Hydro Bypass Rod |
| 747-04621 | Hydro Bypass Rod, 46" |
| 47 | 747-04407A | Hydro Control Rod |
| 48 | 750-0566A | Spacer, .260 x .375 x 1.030 LG |
| 49 | 750-0802 | Spacer, .640 ID X .76 OD X 2.63 |
| 50 | 954-04074A | V Belt, 4L SEC X 78.2 LG |
| 51 | 756-04224 | Flat Idler Pulley2.75 OD |
| 52 | 756-04309 | Input Pulley |
| 53 | 783-04536B-0637 | Support Pedal Bracket |
| 54 | 783-04570A-0637 | Idler Arm |
| 55 | 783-04579A-0637 | Torque Bracket |
| 56 | 783-04585A | Handle Bracket |
| 57 | 783-04600A-0637 | Belt Disengage Support Bracket |
| 58 | 948-0334 | Spacer, T-Axle, 46" only |
| 59 | 634-0104-0941 | Wheel, 20 x 8 x 8 - Yellow |
| 634-0104-0911 | Wheel, 20 x 8 x 8 - Gray |
| 60 | 710-0627 | Hex Screw, 5/16-24 x .750 |
| 61 | 736-0242 | Bell Washer, .340 x .872 x .060 |
| 62 | 725-04363 | Switch Interlock |
| 63 | 17962 | Plate Switch |
| 64 | 728-04021 | Rivot |
NOTE: Tractor features vary by model. NOT all parts listed above and pictured on the previous page are standard equipment.
Frame and PTO Lift
Diagram of the tractor frame and PTO lift mechanism, showing the chassis, lift arms, PTO components, and related hardware, with numbered reference points. A detail view for the '46" Deck Lift' is also included.
| Ref. No. | Part No. | Description |
| 1 | 683-04155A-0637 | Shaft Assembly Lift 42" Deck |
| 683-04334-0637 | Shaft Assembly Lift 46" Deck |
| 2 | 712-04065 | Nut, Flange Lock, 3/8-16, GrF |
| 3 | 714-04043 | Pin, Cotter .08 x 1.56 Intern. RH |
| 4 | 738-05389-0637 | Frame Brace Bracket |
| 5 | 716-0106A | Ring, E-Type, .625 Dia. |
| 6 | 720-0311 | Grip, Handle, 1/2 |
| 7 | 732-04225 | Spring, Torsion 42" Deck |
| 8 | 738-04130 | Screw, Shoulder, .625 x .175, 3/8-16 |
| 9 | 941-0225 | Bearing, Hex Flange |
| 10 | 747-04282 | Deck Handle, Lift, 42" Deck |
| 11 | 747-04393 | Rod, Lift |
| 12 | 783-04494B-0637 | Lift Arm, Deck - RH |
| 13 | 783-04711B-0637 | Lift Arm, Deck - LH |
| 14 | 914-0115 | Cotter Pin |
| 15 | 683-04195-0637 | Support Bracket Assembly |
| 16 | 683-04450-0691 | Frame Assembly |
| 17 | 710-0134 | Carriage Screw, 1/4-20 x .62 |
| 18 | 710-04484 | Screw, 5/16-18, .750 |
| 19 | 725-04439 | Solenoid |
| 20 | 710-3008 | Hex Screw, 5/16-18 x .75 |
| 21 | 712-04063 | Flange Lock Nut, 5/16-18 |
| 22 | 712-04064 | Nut, Flange Lock, 1/4-20, GrF |
| 23 | 912-0429 | Hex Lock Nut, 5/16-18 |
| 24 | 732-04035 | Spring, Compr. , 1.28 OD x 3.125 |
| 25 | 736-0173 | Flat Washer, .28 x .74 x .063 |
| 26 | 738-04237A | Shoulder Screw, #10-32 x .500 |
| 27 | 783-04548C-0637 | Seat Bracket, Frame |
| 28 | 783-04637-0637 | Bracket, Runing Board |
| 29 | 783-04753-0637 | Frame Support Bracket |
| 30 | 783-04869A-0637 | Bracket, Battery |
| 31 | 647-04096-0637 | Handle Assembly, PTO |
| 32 | 710-04608 | Screw, 7/16-20, 3.25 42" Deck |
| 710-04607 | Screw, 7/16-20, 2.75 46" Deck |
| 33 | 710-0599 | Screw, 1/4-20, 0.500 |
| 34 | 914-0145 | Pin, Click, .092 x 1.64 |
| 35 | 720-04049A | Grip, Handle, 3/8 |
| 36 | 732-04276A | Spring, Extension |
| 37 | 936-0171 | Washer, Lock, 7/16 |
| 38 | 736-0322 | Washer, Flat, .450 x 1.250 x .164 |
| 39 | 938-0380 | Bolt, Shldr. .500 x .270 3/8-16 |
| 40 | 741-04119 | Bearing, PTO |
| 41 | 746-04173B | Cable, Deck Engagement |
| 42 | 750-0956 | Spacer, 1.010 x 1.400 x .825, 42" Deck |
| 43 | 956-04067A | Engine Pulley, 38" & 42" Deck |
| 756-04208A | Engine Pulley, 46" Deck |
| 44 | 710-0604A | Screw, 5/16-18, 0.625 |
| 45 | 783-04536B-0637 | Pedal Support Bracket |
| 46 | 925-1707D | Battery, 155 CCA |
| 47 | 936-0300 | Washer, Flat, .406 x .875 x .059 |
| 48 | 747-04857 | Rod, Belt Keeper (42" Deck) |
| 683-04414-0637 | Rod, Belt Keeper (46" Deck) |
| 49 | 725-04363 | Switch, Interlock |
| 50 | 738-1132 | Shoulder Screw, .250 x .150;1/4-20 |
| 51 | 712-3087 | Wing Nut 1/4-20 |
| 52 | 712-0271 | Nut, Sems, 1/4-20 |
| 53 | 710-04666 | Screw, Carriage, 1/4-20, .75, Gr5 |
| 54 | 683-04448-0637 | Battery Hold Down Rod |
| 55 | 783-0678C-0637 | Deck Lift Link |
| 56 | 747-04653 | Deck Handle, Lift, 46" Deck |
| 57 | 720-0298 | Grip, Handle, 5/8 |
| 58 | 732-04438 | Spring, Torsion 46" Deck |
| 59 | 936-0140 | Washer, Flat, .385 x .62 x .063 |
NOTE: Tractor features vary by model. NOT all parts listed above and pictured on the previous page are standard equipment.
42" Deck
Diagram of the 42-inch mower deck assembly, detailing spindle assemblies, pulleys, belt routing, blades, and mounting hardware, with numbered reference points.
| Ref. No. | Part No. | Description |
| 1 | 918-04456 | Pulley Spindle Assembly, 6.3 Dia |
| 2 | 683-04138B-0637 | Deck Brake Assembly |
| 3 | 983-04167 | Deck Brake Assembly |
| 4 | 683-04228-0637 | LH Deck Hanger Bracket |
| 5 | 731-2363 | Mulch Plug |
| 6 | 983-04547-0691 | 42" Deck Assembly |
| 7 | 710-0347 | Hex Screw, 3/8-16 x 1.75 |
| 8 | 710-04484 | Screw, 5/16-18 x .750 |
| 9 | 710-0528 | Hex Screw, 5/16-18 |
| 10 | 710-0778 | Screw, 1/4-20 x 1.500 |
| 11 | 710-3008 | Hex Screw, 5/16-18 x .75 |
| 12 | 710-3015 | Hex Screw, 1/4-20 x .75 |
| 13 | 710-3085 | Hex Screw, 3/8-16 x 3.50 |
| 14 | 912-0206 | Hex Nut, 1/2-13 |
| 15 | 712-0229 | Push Nut, 3/8 |
| 16 | 712-04063 | Flangelock Nut, 5/16-18 |
| 17 | 712-04065 | Flangelock Nut, 3/8-16 |
| 18 | 712-0417A | Flange Nut, 5/8-18 |
| 19 | 912-0641 | Hex Nut, M16-1.5 DIN 936 |
| 20 | 712-3006 | Hex Nut, 1/4-20 |
| 21 | 712-3083 | Hexlock Nut, 1/2-13 |
| 22 | 914-0104 | Cotter Pin, .072 DIA. x 1.13 LG |
| 23 | 714-3002 | Cotter Pin, 3/16 x 1.00 |
| 24 | 917-04074 | Deck Adjust Gear |
| 25 | 921-04041 | Water Nozzle Adaptor |
| 26 | 726-0233 | Push Nut, .25 ID x .50 OD |
| 27 | 732-04280B | Extension Spring, 0.75 OD x 6.375 |
| 28 | 732-04287 | Extension Spring, .500 DIA x 6.375 |
| 29 | 734-0973 | Deck Wheel, 5.0 x 1.38 |
| 30 | 936-0119 | Lock Washer, 5/16 |
| 31 | 936-0179 | Flat Washer, .531 x 1.25 x .100 |
| 32 | 736-0225 | Lock Washer, 5/8 |
| 33 | 936-0267 | Flat Washer, .385 x .87 x .06 |
| 34 | 736-0270 | Bell Washer, .265 X.75 x .062 |
| 35 | 712-3087 | Wing Nut, 1/4-20 |
| 36 | 737-04003D | Water Nozzle |
| 37 | 938-0373 | Shoulder Bolt, .496 x 1.525:3/8-16 |
| 38 | 738-04162A | Shoulder Spacer, .8840 x .190 |
| 39 | 738-04166 | Shoulder Spacer, .5000 x .1475 |
| 40 | 942-0616A | 3 in 1 Blade |
| 41 | 747-04379A | Brake Control Rod |
| 42 | 747-04944A | Deck Lift Rod |
| 43 | 748-04069 | Deck Lift Pivot Cup |
| 44 | 750-04446 | Spacer, 3/8 ID x .68 OD x 1.46 LG |
| 45 | 750-0566A | Spacer, .260 x .375 x 1.030 LG |
| 46 | 954-04060B | V Belt, 96.5 |
| 47 | 756-04129B | Idler Pulley, 4.25"DIA |
| 48 | 931-1032B | Chute Assembly |
| 49 | 783-04327B-0691 | Belt Cover, 6.00 DIA |
| 50 | 783-04740-0637 | Deck Engage Cable Bracket |
| 51 | 783-1026A-0637 | Chute Stop |
| 52 | 710-0134 | Carriage Screw, 1/4-20 x .62 |
| 53 | 956-1227 | Deck Pulley, 6.3 DIA |
| 54 | 938-04241 | Spindle Shaft, 5.50 LG |
| 55 | 941-0919 | Ball Bearing, .787 x 1.85 x .551 |
| 56 | 750-04739 | Spacer, .820 x 1.150 x .480 LG |
| 57 | 750-1000 | Spacer, .80 x 1.10 x 1.322 LG |
NOTE: Tractor features vary by model. NOT all parts listed above and pictured on the previous page are standard equipment.
46" Deck
Diagram of the 46-inch mower deck assembly, illustrating spindle assemblies, pulleys, belt routing, deck covers, idler brackets, and associated components, with numbered reference points.
| Ref. No. | Part No. | Description |
| 1 | 97116 | Deck Brake Assembly |
| 2 | 71258E-0691 | 46" Deck Belt Cover, RH |
| 3 | 918-0230B | Spindle Assembly, 5.00 Dia. w/ Stud |
| 4 | 918-04134C | Spindle Assembly, Double Pulley |
| 5 | 683-0254B-0691 | Deck Hanger Bracket Assembly |
| 6 | 683-04250A-0637 | 46" LH Idler Bracket |
| 7 | 683-04251A-0637 | 46" RH Idler Bracket |
| 8 | 983-04413-0691 | 46" Side Deck Assembly |
| 9 | 712-3087 | Wing Nut, 1/4-20 |
| 10 | 731-05264 | Mulch Plug |
| 11 | 710-04754 | Hex Screw, 3/8-16 x 3.50 |
| 12 | 710-0514 | Hex Screw, 3/8-16 x 1.0 |
| 13 | 710-0528 | Hex Screw, 5/16-18 x 1.25 |
| 14 | 710-0599 | Screw, 1/4-20 x .500 |
| 15 | 710-0778 | Screw, 1/4-20 x 1.500 |
| 16 | 710-0805 | Hex Screw, 5/16-18 x 1.50 |
| 17 | 710-1007 | Screw, 3/8-16 x 1.500 |
| 18 | 710-1026 | Screw, 1/4-20 x 1.750 |
| 19 | 710-1260A | Screw, 5/16-18 x .750 |
| 20 | 710-1315 | Screw, 3/8-16 x 1.250 |
| 21 | 710-3015 | Hex Screw, 1/4-20 x .75 |
| 22 | 711-04636 | Pin, 1/4-20 x 3/8 x x 2.685 |
| 23 | 711-04669 | Clevis Pin, 3/8 x 2.75 |
| 24 | 911-0993 | Belt Guard Pin, 1/4 x 1.43 |
| 25 | 912-0206 | Hex Nut, 1/2-13 |
| 26 | 712-04063 | Flangelock Nut, 5/16-18 |
| 27 | 712-04064 | Flangelock Nut, 1/4-20 |
| 28 | 712-04065 | FLangelock Nut, 3/8-16 |
| 29 | 712-0417A | Flange Nut, 5/8-18 |
| 30 | 912-0641 | Hex Nut, M16-1.5 |
| 31 | 712-3006 | Hex Nut, 1/4-20 |
| 32 | 712-3083 | Hexlock Nut, 1/2-13 |
| 33 | 714-04043 | Cotter Pin, Bow-Tie |
| 34 | 917-04074 | Deck Adjuster Gear |
| 35 | 921-04041 | Water Nozzle Adapter |
| 36 | 726-0233 | Push Nut, .25 x .50 |
| 37 | 932-0429A | Extension Spring, .50 x 3.97 |
| 38 | 732-04400 | Extension Spring, .75 x 6.835 |
| 39 | 932-0594A | Extension Spring, .91 x 7.33 |
| 40 | 732-0814 | Extension Spring, .56 x 5.52 |
| 41 | 734-0973 | Deck Wheel, 5.0 x 1.38 |
| 42 | 936-0119 | Lock Washer, 5/16 |
| 43 | 936-0211 | Flat Washer, .285 x 1.25 x .06 |
| 44 | 736-0225 | Lock Washer, 5/8 |
| 45 | 736-0258 | Flat Washer, .385 x 1.0 x .135 |
| 46 | 736-0270 | Bell Washer, .265 x .75 x .062 |
| 47 | 936-0300 | Flat Washer, .406 x .875 x .059 |
| 48 | 736-0418A | Flat Washer, .34 x 2.25 x .10 |
| 49 | 737-04003D | Deck Water Nozzle |
| 50 | 710-0134 | Carriage Screw, 1/4-20 x .62 |
| 51 | 938-0347 | Shoulder Spacer, .625 x .169 |
| 52 | 938-0373 | Shoulder Bolt, 3/8-16 x .496 x 1.525 |
| 53 | 738-04091A | Shoulder Screw, .5/16-18 x 43 x .29 |
| 54 | 942-0611A | 3 in 1 Blade, 16.28 |
| 55 | 942-0612A | 3 in 1 Blade, 14.88 |
| 56 | 747-04530 | Belt Keeper Rod |
| 57 | 747-04645 | 46" Front Deck Rod |
| 58 | 748-0234 | Shoulder Spacer |
| 59 | 748-04069 | Deck Lift Pivot |
| 60 | 750-04456 | Spacer, .260 x .372 x 1.420 |
| 61 | 750-04999 | Spacer, .380 x .625 x 2.515 |
| 62 | 750-0566A | Spacer, .260 x .375 x 1.030 |
| 63 | 750-1320 | Spacer, .375 x .63 x .595 |
| 64 | 954-0349 | V-Type Belt, 79.10 |
| 65 | 954-04142 | V-Type Belt, 91.4 |
| 66 | 756-04129B | Idler Pulley, 4.25 Diameter |
| 67 | 931-1032B | Chute Assembly Side Discharge |
| 68 | 783-0141-0637 | 46" Deck Center Skirt |
| 69 | 783-0142-0637 | 46" Deck RH Skirt |
| 70 | 783-04641A-0637 | 46" Idler Bracket |
| 71 | 783-05321-0637 | 46" Brake Bracket |
| 72 | 783-05360-0637 | Deck Stop Bracket |
| 73 | 750-1304 | Spacer, .792 x 1.060 x .400 |
| 74 | 783-1348D-0691 | 46" LH Belt Cover |
| 75 | 941-0919 | Ball Bearing, .787 x 1.85 x .551 |
| 76 | 938-1128 | Spindle Shaft, 6.58 |
| 77 | 738-0927 | Spindle Shaft, 4.450 |
| 78 | 748-0434 | Spacer, .750 x 1.150 x .230 |
| 79 | 750-04936 | Spacer, .792 x 1.060 x 1.860 |
| 80 | 756-1187 | Deck Pulley, 5.00 Diameter |
| 81 | 756-1188 | Deck Pulley, 5.75 Diameter |
| 82 | 736-0315 | Flat Washer, .760 x 1.50 x .120 |
| 83 | 750-04440 | Spacer, .792 x 1.060 x 1.680 |
| 84 | 756-04094 | Deck Pulley, 5.00 x .80 |
NOTE: Tractor features vary by model. NOT all parts listed above and pictured on the previous page are standard equipment.
B&S Model 28
Diagram of the exhaust and muffler system for a B&S Model 28, showing the muffler, exhaust pipe, heat shield, and related fasteners, with numbered reference points.
| Ref. No. | Part No. | Description |
| 1 | 683-04549-0637 | Muffler Shield Assembly with Weld |
| 2 | 710-0227 | Screw, 8-18 x .500 |
| 3 | 710-04683 | Screw, 3/8-16 x 1.0 |
| 4 | 710-0642 | Screw, 1/4-20 x .750 |
| 5 | 710-1314A | Socket Screw, 5/16-18 x .750 |
| 6 | 712-0271 | Sems Nut, 1/4-20 |
| 7 | BS-692236 | Exhaust Gasket, 10 HP Briggs |
| 8 | 725-0157 | Cable Tie |
| 9 | 726-0205 | Clamp Hose, .490 diameter |
| 10 | 728-04000 | Rivet, .188 x .300 |
| 11 | 731-05628 | Oil Drain Sleeve |
| 12 | 751-10448A | Muffler, Single Inlet |
| 13 | 751-0564B | Muffler Deflector |
| 14 | 751-10349 | Fuel Hose, Low Permeation |
| 15 | 751-10353 | Muffler Deflector Long |
NOTE: Tractor features vary by model. NOT all parts listed and pictured above are standard equipment.
