USB Ultrasonic Essential Oil Diffuser
User Manual
Overview
This section provides a visual guide to the components of the USB Ultrasonic Essential Oil Diffuser.
Diagram Description: The main unit is a cylindrical diffuser. Key components are labeled numerically:
- 1. Top Cover (with Water Tank Lid)
- 2. Mist Outlet
- 3. Water Tank
- 4. Maximum Water Level Line
- 5. Air Outlet
- 6. Light (Built-in)
- 7. Machine Base
- 8. Power/Mist Button
- 9. DC Socket
- 10. USB Cable
A separate diagram shows the top view of the unit with the lid removed, illustrating the water tank and mist outlet.
Operating Instructions
Follow these steps to set up and operate your essential oil diffuser.
- Remove the top cover.
- Plug the USB cable into the DC socket located on the back of the unit.
- Pour tap water into the water tank up to the maximum water level line. Add 2-3 drops of essential oil (not included) directly into the water tank.
- Replace the top cover securely.
- Plug the USB cable into any USB port or a 5V 1A adapter (not included).
Power Button Functions:
- 1st Push: Continuous mist with automatic changing color lights.
- 2nd Push: Continuous mist with a fixed color light.
- 3rd Push: Continuous mist with no light.
- 4th Push: Turn off the unit.
Operation Steps Diagram Description: Six sequential illustrations show the operating process:
- 1. Shows the top cover being removed.
- 2. Illustrates plugging the USB cable into the rear DC socket.
- 3. Depicts pouring water into the tank and adding oil.
- 4. Shows the top cover being placed back on.
- 5. Illustrates connecting the USB cable to a power source.
- 6. Shows the diffuser operating, emitting mist and light.
Notes:
- Only use 100% pure essential oil.
- The unit will automatically stop misting when the water level becomes too low.
- Disconnect the USB cable from the power source when not in use.
- Please use a 5V 1A adapter (not included) when plugging the unit into the power source.
- Keep the unit out of the reach of pets and children.
Care & Maintenance
- Only use the USB cable included with the unit.
- Always unplug the USB cable before cleaning.
- Essential oil should not come into contact with the exterior surface of the unit.
- Do not submerge the unit in water to avoid the risk of electric shock.
- Do not insert fingers, hands, or any objects into the unit while it is operating.
- Do not attempt to adjust or repair the unit yourself.
- Do not place the unit near heat sources or direct sunlight. Use this unit only as described in this manual.
- When pouring water, remove the top cover, then the water tank lid, and pour water from the side of the air outlet.
- The machine disc should not come into contact with any hard or sharp objects.
- Dry with a soft cloth to prevent mineral buildup. Do not use strong cleaning agents.
- To remove possible buildup, gently use a cotton swab dipped in white vinegar to wipe the inside.
Specifications
| Item Number | GH2010P |
| Size | D100*H138mm |
| Material | PP/ABS |
| Net Weight | Around 147.7g |
| Water Capacity | 100ml (3.52 fl.oz) |
| Mist Output | Around 20ml/h |
| Coverage Area | 40㎡ (431 sq.ft) |
| Continuous Operation | Around 5h |
| Note on Run Time | Run time will depend on humidity level and other external factors. |
| Light | Color light |
| Safety Feature | Low water level auto shut off |
| Power | USB Cable |
Version: V1
