Share UAV Aerial Oblique Camera, Mapping camera
User Manual for SHARE models including: 6100 X-Port, Photogrammetry Camera, 6100 X-Port Photogrammetry Camera
Share 6100 Pro X-PORT | Lowest price online | Global GPS Systems
2022-06-19 — User Manual V2.2. 2021.07 ... not limited to, those set forth in this manual. ... 3. Camera Operation. 3.1 Power On. 3.1.1 Power by DJI SkyPort, ...
File Info : application/pdf, 22 Pages, 1.67MB
DocumentDocumentSHARE 6100 X-Port User Manual V2.2 2021.07 SHENZHEN SHAREUAV TECHNOLOGY Co., Ltd. Disclaimer and Warning Please read this entire document carefully to ensure proper configuration before use. The copyright of this document and all other collateral documents are belongs to SHENZHEN SHARE UAV TECHNOLOGY CO., LTD. (abbreviated as "SHARE UAV"). SHARE UAV has the final interpretation right of this document and all other collateral documents. SHAR EUAV has right to update, modify or terminate the content of of this document without prior notice. For update information, visit website http://www.shareuavtec.com/en and click on the product page for this product. Do Not allow people under the age of 18 to use the SHARE 6100 X-Port. Do Not modify or disassemble the SHARE 6100 X-Port. SHARE UAV accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from the use of this product. The user shall observe safe and lawful practices including, but not limited to, those set forth in this manual. By using SHARE UAV products, you hereby signify that you have read this disclaimer and warning carefully and that you understand and agree to abide by the terms and condition herein. You agree that you are solely responsible for your own conduct while using this product, and for any consequences thereof. You agree to use this product only for purposes that are proper and in accordance with all applicable laws, rules, and regulations. 1. Product Overview.........................................................................................................................2 1.1 6100X-port Introduction....................................................................................................... 2 1.2 Features.................................................................................................................................2 1.3 In the box...............................................................................................................................3 1.4 Parameter..............................................................................................................................3 2. Installation..................................................................................................................................... 4 2.1 Camera Introduction............................................................................................................. 4 2.2 SkyPort installation............................................................................................................... 5 2.3 Camera mounted to other aircraft....................................................................................... 6 2.4 Connect cable........................................................................................................................7 3. Camera Operation....................................................................................................................... 8 3.1 Power On...............................................................................................................................8 3.2 Take photo.............................................................................................................................9 3.3 Video recording...................................................................................................................10 3.4 Camera setting.................................................................................................................... 12 3.5 Camera repair......................................................................................................................14 3.6 Data copy and delete.......................................................................................................... 14 4.Camera Maintenance.....................................................................................................................15 4.1 Cautions...............................................................................................................................15 5. After sales......................................................................................................................................16 5.1 Delivery............................................................................................................................... 16 5.2 After sales service............................................................................................................... 17 Feedback........................................................................................................................................ 17 1. Product Overview SHARE 6100 X-Port camera with gimble is a surveying and mapping product equipped with 61 million pixel sensor and professional-grade surveying and mapping lens, with vertical angle as the main direction of image acquisition. At the same time, the use of the mainstream UAV platform carrying cameras for terrain and building mapping and automatic modeling system can bring revolutionary efficiency improvement to the mapping field. 1.1 6100X-port Introduction Manufacturer: Model No.: Size: Focal length: Sensor Size: SHARE UAV SHARE 6100 X-Port 130 x75 x 80 mm 40mm 23.5*15.6mm Camera Type: Material: N.W.: Exposure Interval: Storage: Single lens Camera Aluminium alloy 670 g 1.2s 256GB SHARE 6100 X-port camera adopts the leading uni-body molding structure in the industry, and creates a more professional mapping camera through excellent shape structure design and advanced manufacturing technology.The fuselage is made of industrial grade aluminum alloy with high structural strength and light weight.The camera can work normally in the environment of -10~40. Thanks to special manufacturing materials and excellent design structure, the camera has the most excellent performance in electromagnetic interference resistance, heat resistance, water resistance, fall resistance, ultraviolet resistance and dust-proof. The camera and gimble can be disassemble and used separately.SkyPort connector integrates a variety of signal lines, automatic identification of flight control signals, which can be highly compatible with many brands of high-performance UAVs, and can realize the user needs of multi-purpose one machine. Open mounting and fixing interface to meet the installation integration of different flight platforms. 1.2 Features * Mounting via DJI SkyPort, highly compatible with DJI M300 RTK drones * Automatic recognition of trigger signal, highly compatible with a variety of flight control, support serial communication, can be deeply adapted development * Support DJI Terra, to realize high-precision without setting ground control points * Camera firmware will automatically upgraded online when connect to Data Manager * SHARE Data Manger management flight intelligently 2 * Real-time image transmission and support video recording * Wide voltage input, a wider range of aircraft * Camera and gimble can be disassemble, camera support separate use * Professional mapping lens, high mapping working rate 1.3 In the box Camera Gimble Connector Protection Case Card Reader Lens Cover Skyport Cover Wipe Cloth J30J-15 Cable 1pc 1pc 1pc 1pc 1pc 1pc 1pc 2pcs 1pc shock absorber ball 4pc User Man ual 1pc 1.4 Parameter SHARE 6100 X-Port Power Duration On/Off Data copy Storage Pixels Camera parameters Sensor size Pixels size Resolution Angle range Lens qty Focal length Exposure time Exposure mode Working environment Video Working temperature Humidity DC 13.6 ~ 48 V Depend on UAV Auto On/Off Storage card, R/W via USB 3.0 card reader 256 GB 61MP Full frame35.7mm × 23.8 mm 3.7 um 3:2 9504 × 6336 Pitching+30°to -120°Yaw±150° 1 pc 40 mm 1.2s Autopilot trigger One button record -10 ~ 50 95% 3 Size Measurement Weight 130 × 75 × 80 mm 670 g 2. Installation 2.1 Camera Introduction SHARE 6100 X-Port Camera housing radium carved with the "SHARE" direction is defined as the front, installation with the aircraft nose in the same direction. Photo drive (SD card 1) should be named "3 Down View", POS information drive (TF card) should be named "GPS" to be compatible with Share Data Manager. The camera can be separated from the gimble and used separately. Four threaded holes are arranged at the bottom of the fuselage to connect the camera with the fixed bracket of the aircraft. The J30J- 15P cable can connect to UAV flight control system and integrate power supply, trigger, hot shoe, serial port, picture transmission and other functions. Pic1 Interface Pic 1 shows the interface of the SHARE 6100 X-Port camera. Among them, HDMI is mini HDMI interface, TF is POS card slot, LED is camera working status indicator, SD1 is camera card slot1, J30J-15 is camera cable interface. Users can enter the menu according to their requirements and set SD1 in Camera Settings-5, Camera media Settings (generally there is no need to set, the default setting is SD1 to store photos). 4 Pic2 SD card setting 2.2 SkyPort installation Installation steps 1Remove SkyPort cover of the drone, press and hold the release button; 2Remove SkyPort cover of the camera, align the white point of the camera with the red point of the drone, and embed it in the installation position; 3Rotate the camera to the lock position, align the red dots, and the camera is installed; Pic 3 Camera installation 4 Uninstall camera press and hold the release button, rotate the camera in the opposite direction until the red point is aligned with the white point, then remove the camera; 5Put on SkyPort covers and lens cover. 5 2.3 Camera mounted to other aircraft Pic4 Mounted to gimble Pic 5 Mounting holes at the bottom of the camera 1The user needs to disassemble the gimble and camera with the screwdriver as shown in Pic 4, pull out the connection cable between the gimble and camera, and connect the camera and the aircraft with J30J-15P equipped to complete power supply and control; 2Users can design the mounting structure matching the flight platform by referring to the connecting holes shown in Pic 5 to complete the assembly of the aircraft and camera. It is recommended to install shock absorber balls to prevent camera shake during flight and affect the photo quality. 6 2.4 Connect cable J30J-15P Definition Name J30J-15P Pic6 J30J-15P Power Pin XT30 PPS Pin C/A2547H-4 P Shutter and Hot Shoe Pin D/A2510HM-3PR TTL Pin E/A2547H-5 P Pic Functio n Connect to Camera Power Line 1-DC 13.6-48V 2-GND PIN1:PPS PIN4:GND PIN1: Shutter PIN2: Hot shoe signal + PIN3: Hot shoe signal - PIN1&2:NC PIN3:GND PIN4:TXD PIN5:RXD 7 3. Camera Operation 3.1 Power On 3.1.1 Power by DJI SkyPort, turn on automatically when drone is on Pic 7 Pilot ground station steps of power on: 1Mount the 6100X-port on the DJI drone, and make sure the installation is firm 2Turn on the drone, the camera will start automatically and enter the self-test. The total startup duration of the camera will be 40 S, during startup, the blue indicator blinks quickly. After startup, the camera beeps and the blue indicator blinks slowly 3During startup, the real-time data window on the Pilot screen displays "Unable to take photos", and "Available to take photos" after startup. Pic 8 Pilot real-time screen Pilot Real-time Data Display: Dispaly Meaning Remark 1 Photo Camera is turned on, it can capture normally 2 RTK RTK status 0 -- no solution, 8 16 -- single point solution 34 -- floating point solution 50 -- fixed solution 3 Receive trigger The trigger times that The camera should execute times camera received shutter times 4D Actually shutter times of the camera 5 RtkFlag, SD / / 4During the startup of the camera, a time setting or camera setting interface will appear on the photo transmission interface. At this time, the camera initialization will automatically switch this interface. After the startup is complete, the photo transmission image display will enter the photo taking interface. 3.1.2Power by J30J-15, turn on automatically when drone is on It is recommended that the power supply voltage be 13.6-48 v DC. When the camera is working, the instantaneous power of the power supply must be more than 15W to ensure the normal operation of the device. Steps 1Mount the 6100X-port on the drone, and make sure the installation is firm 2Turn on the drone, the camera will start automatically and enter the self-test. The total startup duration of the camera will be 40 S, during startup, the blue indicator blinks quickly. After startup, the camera beeps and the blue indicator blinks slowly 3After startup, camera can take photos now 4Do not turn off drone till 15 seconds after last photo was taken; 5 It is recommended that you connect the camera power after UAV startup is completed, to avoid frequent camera restart caused by frequent on-off of the UAV. 3.2 Take photo 9 Pic 9 DJI M300 RTK Pilot screen Take working with DJI M300RTK for example, camera is on, the left bottom window shows the real-time image. As the indoor light is insufficient and the image is black. User can press the `photo' button on controller to test the photo function. 3.3 Video recording 3.3.1 Operation Pic 10 Take working with DJI M300RTK for example, camera is on, The photographing is enabled by default, User can click on red frame of Pic 10, the icon to enter video mode. Click once icon will turn to and start to record. Click again, icon restore to and camera stop recording. User can know the status of camera by red frame and red frame on photographing or recording mode. Red frame shows remaining available video time. It should be noted that the camera may fail to switch from photographing to recording mode if the camera is switched too fast. It is recommended that users wait for 1-2 minutes after finishing photographing (or observe the progress bar in the upper left corner of the camera's picture transmission interface) and start recording after the photo is saved. 10 3.3.2 Video file format Pic 11 The default video format of the camera is 1080P (XAVC S HD). Users can modify the video file format by remote control as required. Attention When the video file is set to 4K (XAVC S 4K) format, the camera image transmission will enter the black screen state! 3.3.2 Storage recording file XAVC S 4K and XAVC S HD formats are stored as .MP4 files, stored in: AVDHD formats is stored as.MTS filestored in: 11 3.4 Camera setting 1Camera setting on DJI Pilot Open DJI Pilot Mission Flight -- Create a Route -- Mapping -- Create a mapping area Custom Camera Add Camera Camera Setting -- Overlap setting 2SHARE 6100 X-Port parameter Photo resolution (W) Sensor size (W) Focal length SHARE 6100X-Port 9504px Photo resolution (H) 35.7mm Sensor size (H) 40.0 mm Minimum interval 6336px 23.8mm 1.2s Pic12 create customize camera As shown in Pic 12, click Finish and save after completing the custom camera Settings 3Payload setting Pic 13 Payload setting 12 Click the three points in the upper right corner of the screen and select Payload. On this screen, users can adjust the camera exposure mode, shutter speed, and switch on and off the camera. 3Camera parameters Pic 14 As shown in Pic 14, in the camera image transfer interface, click the icon in the red frame in the picture to open the camera adjustment panel (click close again). The adjustment panel is shown in the red box (). Slide up and down in the adjustment panel to view all keys. Click the menu icon to the left When the camera enters the setting interface , users can set the required parameters by confirming up, down, and left of the adjustment panel according to their requirements. [Note] After modifying the parameters, you need to click the button to enter the payload setting screen. Click to shut down the camera once to save the modified Settings. If the camera is powered off directly without click, the modified parameters will not be saved. Key function description: Key Function Real-time data(On/Off) Real-time data window display/hide Mode Camera mode switch (A,S,M), default is M Shutter Shutter speed(1/640,1/800,1/1000,1/1250) On/Off Camera On/Off (default Off) OK Confirm button Menu Menu button Up Up button Down Down button Left Left button Right Right button Play Play button Delete Delete button 13 4Mechanical button setting Pic 15 Buttons You can also change the basic parameters (Settings) of the camera through the external button of the camera, as shown in Pic 15. 3.5 Camera repair In the case of data writing errors caused by abnormal power supply or other working abnormalities such as camera not taking photos, there are two repair methods: (1) Automatic repair: the user can restart the camera power, the camera will automatically perform an initial repair; If the problem cannot be fixed automatically, you can format the camera memory card and restart the camera power again. Manual repair: Click the "Confirm" button in the Payload Settings or the "OK" button of the mechanical button and confirm the operation as prompted. 3.6 Data copy and delete Copy the data, Remove the memory card from the camera, and put into USB 3.0 card reader, connect to computer, there are 3 D drive and GPS drive. 1. Open Share Data Manager, select the corresponding camera and aircraft model, and enter the home page; 2. Select the flight to be copied and check the details to ensure that the photos match the POS correctly; 3. Select a copy path, modify the copy Settings as required, and click Copy flight. It is recommended to copy to computer local site; 4. After the copy is complete, click View data to check whether the data is normal. 5. Delete the data. Select the flights to be deleted, click Delete flights, and wait for the clearing to be completed; Or select initialize camera to clear all user data; 6. Click disconnect, eject drives, and insert the memory card back to the original slot of the 14 camera. Attention 1. Please delete the drive letter file by using Share Data Manager. 2. Clean flights and initialize cameras. The data cannot be restored after being cleaned. 4.Camera Maintenance Do not disassemble or alter the camera without permission Lens distortion has been checked and adjusted before dispatching. Please do not disassemble or alter the camera by yourself. Especially the camera lens. If you need to design or modify the camera to install and mount, please contact Share technical support. 4.1 Cautions When using the camera, please pay attention to the daily maintenance. 1. Please store the camera in a dry and ventilated place at normal temperature to avoid fogging caused by excessive humidity. It is recommended that the ambient temperature be between 15 ° C and 25 ° C and the relative humidity be less than 40%.If the lens fogs up, water vapor will dissipate automatically after the camera is turned on and heated up for a period of time. 2. Avoid storing the camera in places with strong vibration and close to strong magnetic field; 3. Do not bring the device directly from a cold place to a warm place to prevent moisture condensation. 4. Do not place the camera in direct sunlight for a long time, and try to avoid direct sunlight on the lens. Strong light can easily stimulate the imaging chip and reduce the service life of the sensor. 5. The internal working temperature of the equipment is about -10~50 , and it is not recommended to work in the extremely hot and cold environment beyond the working temperature range; 6. Do not use hands or hard objects to scratch the surface coating of UV lens or lens, otherwise it will cause camera imaging blur; 7. Pay attention to the camera interface and UV lens clean and dry, timely installation of protective cover; 8. When cleaning the lens, please use a soft and dry cleaning cloth to wipe the surface, please do not use detergent containing thinner or gasoline and other organic solvents to clean the UV lens; 15 9. Do not use unstable power supply or power supply beyond the range of voltage the camera can bear; 10. Do not turn on or off the camera frequently. Please wait for more than 30s between continuous switching on and off, otherwise the service life of the sensor will be affected; 11. Camera shutter is consumable. Under normal circumstances, the effective shutter count is about 100k; When the shutter is used more than the effective times, the camera will not take pictures, lose pictures, slow reaction, camera error and etc. It is recommended to return the camera to Share for a paid replacement of the shutter, so as to avoid the impact of equipment strain on flight operations 12. Please copy and clean the data with Share Data Manager to reduce the residual debris of garbage files. After using the camera for a period of time, it is recommended to perform an initial cleaning of the camera to improve the service life of the memory card. 13. The camera is a precision equipment, please place it in the transport case during the transit; 5. After sales 5.1 Delivery 1 All equipment delivered by SHARE UAV shall be packed in accordance with the standard protective measures for packaging and transportation. Such packaging shall meet the requirements for long-distance transportation, moisture resistance, shock resistance, rust prevention, etc. required according to the specific properties of the equipment to ensure that the equipment arrived safely at the place of delivery. 2Packaging 16 Pic 16 6100X-port Case layout SHARE 6100 X-PortKeep the cover of the transport case upward, and do not place it upside down. Avoid severe vibration and turbulence during transportation. 5.2 After sales service (1) Hardware warranty terms: 1 year warranty since delivery. During the warranty period, Party B shall only undertake the delivery, maintenance and quality guarantee of Party A's goods within the territory of the People's Republic of China. (2) Warranty conditions: Quality issues only. Devices with below conditions will be out of warranty even if within warranty time: damaged, water damaged,out of order caused by improper usage, failure caused by misoperation or software/firmware parameter changes, or disassembled without authorization etc. (3) Warranty service: Regulations on after-sales service of Share UAV Party A: Buyer of Products Party B: Shenzhen Share UAV Technology Co., LTD The after-sales service content shall refer to the after-sales service regulations of Share UAV; If you have any questions, please contact Shenzhen Share UAV Technology Co., LTD After-sales service and technical support tel: 0755-23216686 (working days 9:00-18:00 Beijing time) Feedback 17 18 Official Website YouTube If you have any questions about the product Please contact us via email INFO@SHAREUAVTEC.COM SHENZHEN SHARE UAV TECHNOLOGY CO.,LTD FaceBook