Your Name as Your Email | Hover Realnames
LED Lighting Systems, Linear LED Lights, LED transformers | Q-Tran
Installation Guide for TRAN LED models including: Q-CAP Flexible Fixtures WALA, Q-CAP Flexible Fixtures, Flexible Fixtures, Q-CAP, Q-CAP Fixtures, Fixtures, WALA
File Info : application/pdf, 4 Pages, 2.66MB
DocumentDocumentINSTALLATION Q-CAP Flexible Fixtures: WALA VHB MOUNTING 1. 2. Remove the backing from the adhesive and apply firm pressure to the bonding surface. 3. Peel off secondary backing. Adhere to mounting surface. WHITE SNUG CLIP NOTE: White snug clip should be placed every 12" INCLUDED HARDWARE .625" .21" .25" .44" .50" #4x5/8" Flat head screw 2. 1. 12" Mount white snug clip with provided flat head screw. 3. .07" Align fixture to white snug clips matching distances. Press fixture into white snug clips. © 2021 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com Specification subject to change. Rev-07-28-21 INSTALLATION Q-CAP Flexible Fixtures: WALA PVC MOUNT CLIP: Connects two seamless fixtures, with or without wire exit WALA-PPS-2 .94" Mounting Feed 1. .56" .46" 2.0" 2.0" Press both fixtures into PPS clip. 3. Finished Assembly for seamless bottom feed mounting (S5,S6/P5,P6). Power Supply 2. Snap fixture into mounted PPS channel When wire will exit into conduit do not install bracket. LOW PROFILE PVC MOUNT CLIP: Connects two seamless fixtures, with or without wire exit WALA-PPS-LP-2 Mounting Feed 1. 2. .47" .56" 2.00" Snap in 2" channel Press in fixtures 3. Finished assembly for end feed mounting (S1/P1). Power Supply © 2021 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com Specification subject to change. Rev-07-28-21 INSTALLATION Q-CAP Flexible Fixtures: WALA PVC MOUNT CHANNEL: Support for the fixture WALA-PPS-96 & WALA-PPS-FT - 96" (PPS-96) or custom length (PPS-FT) .94" .56" .46" 96" / FT 96" / FT INCLUDED HARDWARE 1" .46" PPS - BRACKET: #6 Flat head screw Sold in full length of 96" or custom length (FT) Built in wireway: The PPS-BRACKET allows you to create a wire way under the PPS channel without any screws interfering Cove install .60" .95" Cut out area COVE 1. The PPS-BRACKET can be field cuttable and cut to whatever length your application requires. The PPS-BRACKET can be installed as a full length of 96", multiple smaller pieces, or end to end for longer seamless runs. .17" .26" .26" 2. 1" 3. #6 Flat head screw 16" 16" 16" Using pre-drilled pilot holes screw the #6 flat head screws to mount the PPS-BRACKET (1 screw every 16"). NOTE : For drywall applications mount directly into a stud. Using pre-drilled pilot holes, use the #6 flat head screws to mount the PPS-BRACKET. 4. 5. 2" or more The PPS-96 or PPS-FT can be field cuttable and cut to whatever length your application requires. The PPS-96 or PPS-FT can be installed as a full length of 96", multiple smaller pieces, or end to end for longer seamless runs. To mount, pinch the upper half of the PPS-96 or PPS-FT while you pivot it around one side of the PPS-BRACKET and push-in until you hear it snap into place. The PPS-96 or PPS-FT flexes around the PPS-BRACKET to create a solid, and secure snap on connection. © 2021 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com Specification subject to change. Rev-07-28-21 INSTALLATION Q-CAP Flexible Fixtures: WALA LOW PROFILE PVC MOUNT CHANNEL: Support for the fixture WALA-PPS-LP-96 & WALA-PPS-LP-FT - 96" (PPS-96) or custom length (PPS-FT) .47" INCLUDED HARDWARE .56" 96"/FT 1" #6 Flat head screw 1. 2" or more Cove install .57" Cut out area COVE .48" The PPS-LP-96 or PPS-LP-FT can be field cuttable and cut to whatever length your application requires. The PPS-96 or PPS-FT can be installed as a full length of 96", multiple smaller pieces, or end to end for longer seamless runs. .26" .26" 2. 16" 16" 16" Drill holes (1 hole/screw every 16") into the PPS-LP. 3. 1" #6 Flat head screw Using pre-drilled holes, use the #6 flat head screws to mount the PPS-LP. NOTE : For drywall applications mount directly into a stud. 4. Snap fixture into PPS-LP. © 2021 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com Specification subject to change. Rev-07-28-21