Immax NEO WiFi Smart Blind Switch

Technical Specifications

• Protocol: Wi-Fi 802.11 b/g/n
• Frequency: 2.4MHz
• Max. RF Output Power: WiFi: 20dBm
• Power Input: AC 100-240V AC 50/60Hz
• Max. Load: 800W
• Max. Current: 10A
• Wireless Range: 30 m (direct line of sight), 10 m (in built-up areas)
• Operating Temperature: -10°C to 40°C
• Operating Humidity: < 80%
• Network Standby Power (Pnet): 0.01mA
• Protection Rating: IP20
• Material: Plastic, Glass
• Dimensions: 80 x 80 x 47mm
• Weight: 115g

Installation

1. Disconnect the button and frame from the base.
2. Connect the switch according to the wiring diagram.
3. Install the base in the desired location.
4. Install the frame and then the button.

Immax NEO PRO Application and Device Pairing

Scan the QR code or search for and install the Immax NEO PRO app from the App Store or Google Play.

Launch the Immax NEO PRO app and tap ‘Register’ to create your account using your email address. If you have already registered, log in using your account.

Connecting via Bluetooth:

1. Turn on Bluetooth on your phone and open the Immax NEO PRO app.
2. Tap ‘+’ in the upper right corner of the “Home” page and select ‘Add Device’.
3. Wait for Bluetooth to search for devices, then select ‘Add’.
4. Enter your WiFi network access details.
5. Wait for the device to connect.

Reset Device (Enter Pairing Mode)

Press the buttons shown in the picture simultaneously for at least 3 seconds. The LED backlight will start flashing. Then release the buttons. The device should now be in pairing mode.

Maintenance

Protect the device from contamination and dirt. Wipe the device with a soft cloth; do not use harsh or coarse materials.

DO NOT use solvents or other aggressive cleaning agents or chemicals.

Safety Information

WARNING: Keep out of reach of children. This product contains small parts that may cause choking or injury if swallowed.

WARNING: Handle batteries with care. Do not mix battery types or brands. Do not use rechargeable batteries. Do not allow children to install batteries without supervision. Follow battery manufacturer's instructions for handling and disposal.

WARNING: The product and batteries should be disposed of at a recycling centre, not with normal household waste.

WARNING: Installation must be carried out by a qualified electrician in accordance with applicable regulations. Always disconnect power before installation or maintenance. Incorrect installation may result in product damage or injury.

WARNING: Do not disassemble the product due to the risk of electric shock.

WARNING: Use only the original power adapter. Do not operate if the power cord is damaged.

WARNING: Follow the instructions in the enclosed manual.

Declarations and Support

A Declaration of Conformity has been issued for this product. For more information, visit www.immax.cz or www.immax.eu.

Safety information for this product can be downloaded from www.immax.cz.

For questions or advice, contact us at podpora@immaxneo.cz.

Notes on Disposal: The symbol ? indicates that the product must not be disposed of with municipal waste. Take the product to designated collection points for proper disposal. Remove batteries and light bulbs if possible before disposal. Waste electrical and electronic equipment can be handed in free of charge at public collection points. As the end user, you are responsible for deleting personal data from your old appliance.

ASEKOL: AK-016010, WEEE Reg. No. DE 88927148