STREETZ HL-BT405 Bluetooth Headphones

Product Overview

The headphones feature the following components:

• 1. Voice assistant button: For activating your device's voice assistant (e.g., Siri, Google Assistant).
• 2. Aux port (3.5 mm): For wired audio connection.
• 3. USB Micro-B charging port: For charging the headphones.
• 4. Microphone: For calls and voice commands.
• 5. Power/Control button: Used for Power On/Off, Play/Pause, Answer/End Call, and Bluetooth connection.
• 6. LED status indicator: Displays charging and connection status.
• 7. Previous song/decrease volume: Controls track selection and volume.
• 8. Next song/increase volume: Controls track selection and volume.

Charging

This product has a built-in rechargeable battery. Before first use, it is recommended to charge the battery fully (approximately 2 hours). Use the included Micro USB cable. Connect the Micro-B USB connector to the headset and the other end to a 5V USB power source, such as a USB power adapter or a computer.

LED Status Indicators

• LED is lit red: Charging
• LED is lit blue: Fully charged
• LED flashes alternatively blue and red: Ready for connection
• LED flashes blue every 5 seconds: Connected

Power Button Functions

• Turn On/Off: Press and hold the power button for approximately 5 seconds.
• Play/Pause/Answer/End Call: Press the power button once.
• Reject Call: Press and hold the power button for 2 seconds.
• Redial Last Number: Press the power button twice.

Connectivity

Connecting via Bluetooth

To connect via Bluetooth:

1. Turn the headset off.
2. Press and hold the power button for 5 seconds to enter pairing mode (from power off state).
3. From your Bluetooth device, connect with the headset. If a password is requested, use the default: 0000.

The headphone will automatically connect to the last connected device. Use your device to disconnect the headset.

Connecting via Aux Port

Connect the 3.5 mm cable to the Aux port of the headset and the other end to an audio device. The headset turns on automatically in Aux mode, and control buttons are disabled. Volume can only be changed from your audio device.

Controls

Volume Control

Short press the “+” button to increase volume or the “-” button to decrease volume.

Track Control

Press and hold the “+” button for the next song or the “-” button for the previous song.

Voice Assistant

Press the voice assistant button to activate your device's voice assistant, such as Siri or Google Assistant. You should hear an indication tone before speaking. For this function to work, a voice assistant must be installed on your device, set as the default assistant, and your device must be connected to the headset via Bluetooth.

EU Declaration of Conformity

DistIT Services AB declares that the radio equipment type wireless device is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: https://www.deltaco.se/produkter/xx (replace 'xx' with the article number, e.g., https://www.deltaco.se/produkter/TWS-111). All documents can be found on the product's specific website under the "Info/Certifikat" tab.