Artika Raya Integrated LED Wall Mirror
Model: WMIRH-RACH-D24-HD2
Description: Integrated LED wall mirror with tunable white technology and defogger.
Revision Date: 05-27-2024
Usage: Residential use only, Indoor use only.
Important Safety and Installation Information
The installer and user must read, understand, and follow these instructions before installing and using the product. Proper installation is required before use. Failure to follow instructions may void the warranty and could lead to product malfunction or safety issues. It is recommended that this product be installed by a certified electrician.
⚠️ WARNING: Risk of electrical shock. Turn off the main electrical supply from the fuse box/circuit breaker before installing the unit or performing any maintenance. Do not use outdoors.
Included Hardware
Item | Description | Quantity |
---|---|---|
A | Wall anchor | 2 |
B | Retaining screw | 2 |
C | Wire connector | 2 |
D | Mirror | 1 |
Tools You Will Need
- Screwdriver (2 recommended)
- Measuring tape
- Level
- 1/4 in. drill bit (6 to 6.5 mm)
- Drill
Installation Steps
Step 1: Wall Mounting Preparation
Hole Spacing: 30 cm (11.8 inches).
Minimum Height: 60 cm (23.62 inches) from the floor or sink.
Ensure a nearby power supply is accessible.
[Diagram description: Illustrates the recommended spacing between mounting holes on the wall and the minimum height requirement above a sink.]
Step 2: Installing Anchors and Screws
Mark the wall for the mounting holes based on the specified spacing. Drill the holes and insert the wall anchors (A). Then, secure the mounting bracket (part of item D) to the wall using the retaining screws (B).
[Diagram description: Shows drilling holes, inserting wall anchors (A), and then using retaining screws (B) to attach the mirror's mounting bracket.]
Step 3: Electrical Connection
Connect the mirror's power wires to your home's electrical wiring using the provided wire connectors (C). The mirror has a White wire (labeled N) and a Black wire (labeled L). Ensure all connections are secure and made in accordance with local electrical codes.
[Diagram description: Depicts connecting the mirror's White (N) and Black (L) wires to the house wiring using a wire connector (C).]
Step 4: Mounting the Mirror
Carefully attach the mirror unit (D) to the securely mounted bracket on the wall. Ensure it is properly seated and secured.
[Diagram description: Shows the mirror unit (D) being attached to the wall bracket.]
Operation and Features
The Artika Raya mirror offers ON/OFF control, tunable white technology, dimming capabilities, and a defogger function.
Controls:
- ON/OFF, Tunable White, Dimmable: Press and hold the control button to adjust brightness and color temperature.
- Memory Function: The light will remember its last used setting. This setting is retained when the wall switch is turned off for more than 5 seconds, or when the wall switch is closed.
- Defogger: This function is active for 30 minutes to clear mirror condensation.
[Diagram description: Illustrates the touch-sensitive control panel on the mirror surface, indicating functions for ON/OFF, brightness adjustment, and defogger activation.]
Important Note on Operation: Rapidly turning the light ON and OFF (within 5 seconds) may change the Color Temperature (CCT). For consistent recall of settings, ensure the wall switch is used for more than 5 seconds to turn off, or use the touch control for more than 5 seconds before turning off.
Regulatory Compliance
USA (FCC): This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device does not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for Class B digital devices, providing reasonable protection against harmful interference in a residential installation. If interference occurs, users are encouraged to try correcting it by reorienting the receiving antenna, increasing the distance between equipment and receiver, connecting to a different circuit, or consulting a dealer or experienced technician.
Canada (IC): Operation is subject to the following two conditions: (1) this device does not cause interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Limited Warranty
Artika For Living Inc. provides a three (3) year limited warranty against manufacturing defects for residential use, commencing from the date of purchase. This warranty extends to the original owner in the US and Canada and is non-transferable. It does not apply to retailers, commercial applications, or establishments. The original sales receipt is mandatory for all warranty claims. The remedy for warranty claims is product or part replacement at Artika's discretion, not to exceed the original purchase price.
This warranty is valid only for products installed in accordance with the building code, applicable laws, and the provided instruction manual. It does not cover products installed incorrectly, subjected to abnormal use, normal wear and tear, misuse, negligence, vandalism, improper maintenance (including surface damage from chemical interaction, abrasive cleaners, alcohol, or organic solvents), improper handling, accidents, abuse, fire, flood, theft, acts of God, neglect, or alterations. Any accessories accompanying the product, such as bulbs or batteries, are excluded. Costs associated with handling, labor, transportation, or installation/replacement are not covered.
This limited warranty is valid in the country of purchase for products sold by Artika authorized retailers.
Artika For Living Inc. shall not be held responsible for any direct or consequential damages or injuries resulting from improper use or installation of this product.
For more information about Artika For Living Inc., please visit www.artika.com.
Contact Information:
Artika For Living Inc.
1756, 50th Avenue
Montréal (Lachine), Québec
Canada H8T 2V5
Customer Service: Monday to Friday, 9 am - 5 pm EST
Phone: 1-866-661-9606
Email: support@artika.com