Rollei Lumen Studio 100 Bi-Color

Before the First Use

Read the operating instructions and the safety instructions carefully before using the device for the first time. Keep the operating instructions together with the device for future use. If other people use this device, make this manual available to them. If you pass on the device to a third party, this manual belongs to the device and must be supplied with it.

Intended Use

This unit is designed for use as photo and video lighting only. It must not be used for other purposes and in particular not for domestic room lighting.

Explanation of Symbols

The following symbols are used in this manual, on the LED light or on the packaging:

• [CE marking] Products marked with this symbol comply with all relevant community regulations of the European Economic Area.
• [Alternating current symbol] Products marked with this symbol are operated with alternating current.

Overview

The Rollei Lumen Studio 100 Bi-Color features the following components:

• 1 LED: The main light source.
• 2 Release Bowens S-type mount: Button to release or lock light shapers.
• 3 Carrying handle: For transporting the light.
• 4 Display: Shows current settings like brightness and color temperature.
• 5 Mode button: Cycles through different settings (e.g., brightness, color temperature).
• 6 Setting buttons: Used to adjust selected settings (e.g., increase/decrease brightness or temperature).
• 7 On/off switch: Powers the unit on or off.
• 8 Mains cable socket: Port for connecting the power cable.
• 9 U bracket: Allows mounting the light on stands or suspension.
• 10 Lamp tripod lock: Secures the light to a tripod or stand.
• 11 Bowens S-type mount: Standard mount for attaching various light modifiers.

Note: The light can be suspended using the U bracket.

Operating

Connect the supplied mains cable to the mains cable socket [8]. Press the on/off switch [7] to position "I" to turn on the LED light. Position "O" switches the light off.

Note: Before use, remove the protection cap on the LED continuous light by using the release of the Bowens S-type mount [2]. After use, replace the protection cap by placing it on the LED continuous light like a light shaper and letting it click into place.

Bowens S-type Mount

The Rollei Lumen Studio 100 Bi-Color is equipped with a Bowens S-type mount [11] for using various light shapers such as softboxes, reflectors, and beauty dishes.

• To attach a light shaper, align its three bayonet pins with the corresponding recesses on the LED lighting head and lock it by turning it briefly to the right until it audibly clicks into place.
• To remove a light shaper, pull the release of the Bowens S-type mount [2] to the rear, turn the light shaper to the left, and pull it off to the front.

Display

The display shows the following information:

• 1 Brightness in %: Current brightness level.
• 2 Temperature of the LED continuous light: Internal operating temperature.
• 3 Bluetooth®*: Indicates Bluetooth connectivity status.
• 4 Color temperature: Current color temperature in Kelvin (K).
• 5 Mode button: Used to select which parameter to adjust.
• 6 Setting buttons: Used to increase or decrease the selected parameter.

Adjusting the Brightness

Press the Mode button [5] until the brightness symbol flashes. Use the Setting buttons [6] to adjust the brightness. The brightness can be set between 0% and 100% in 1% steps.

Adjusting the Color Temperature

Press the Mode button [5] until the color temperature symbol flashes. Use the Setting buttons [6] to adjust the color temperature between 3,000 and 6,000 K in 100 K steps.

U Bracket

The U bracket allows mounting the LED light from above (e.g., on the ceiling). Loosen the knobs on the sides, turn the bracket around, and remount it from above. This ensures reliable heat dissipation.

Rollei Lumen App / Bluetooth®*

Rollei Lumen App

Download the "Rollei Lumen" app directly from the App Store or the Google Play Store (requires iOS 9.0 or higher, Android 5.0 or higher).

Connection with the smartphone

1. Activate Bluetooth®* on your smartphone.
2. Switch on the Rollei Lumen Studio 100 Bi-Color continuous light.
3. Open the "Rollei Lumen" app; the connection to your phone will be established automatically.

Note: The connection is established using "Bluetooth® Low Energy" (BLE). This requires location permission for the app. The connection to the LED light is established directly within the app.

[App Store logo] Available on the App Store

[Google Play logo] Get it on Google Play

Technical Data

Power LED

100 W

Color temperature

3,000 - 6,000 K, adjustable in 100 K steps

Color rendering index (CRI) | Television Lighting Consistency Index (TLCI)

95+ | 96+

Power adjustment

0–100% in 1% steps

Illuminance

Without reflector: 40,590 lx (0.5 m at 5,500 K) | With reflector: 264,320 lx (0.5 m at 5,500 K, 70° reflector)

Bowens S-type mount

Yes

Remote control

Via Rollei Lumen App

Bluetooth®* version

4.0

Radio frequency band

2,400 – 2,480 GHz

Max. transmission power

8 dBm

Power supply

AC 100 – 240 V / 47 – 63 Hz

Volume cooling fan

< 20 dB (0.5 m)

Connections

Power cord, Bowens S-type-Mount

Dimensions | Weight

32 x 23 x 13.7 cm | 1.79 kg

Box Content

Rollei Lumen Studio 100 Bi-Color, protection cap, mains cable

Note: Technical details are subject to change without notice. Misprints and errors excepted. Reproduction of these operating instructions – even in part – is not permitted.

Safety Instructions

Danger from electric current!

Faulty electrical installations or excessive mains voltage can cause electric shock.

• Only connect the product if the mains voltage of the socket corresponds to the specifications on the type plate.
• Connect the product to an easily accessible power outlet so that you can quickly disconnect it from the mains in case of problems.
• Use only the supplied mains cable.
• Do not use the product if it is visibly damaged or if the cable is defective.
• If the product or its accessories are damaged, they must be replaced or repaired by the manufacturer, its service department or a similarly qualified person to prevent hazards.
• The housing must not be opened and repairs must only be carried out by a qualified technician. Contact a specialist workshop. Liability and warranty claims are excluded for repairs by the user, improper connection, or incorrect operation.
• Do not use the product with an external timer or a separate remote control system.

General Precautions

• If you do not use the device for a long period of time, always disconnect it from the power source.
• Protect the product from moisture. Do not touch the product with wet/damp hands or immerse it in water.
• This product is not waterproof! Do not use this product in the rain or in wet environments. Never touch the product during a thunderstorm.
• Before disconnecting the power, switch off the unit at the main switch.

Caution!

• Never use the mains cable as a carrying handle.
• Keep the product and accessories away from naked flames, hot surfaces, and easily flammable materials.
• Lay the mains cable in such a way that it does not present a tripping hazard.
• Do not bend the power cord or lay it over sharp edges.

Safety for Children and Vulnerable Persons

• Danger for children and persons with limited physical, sensory, or mental abilities (e.g., partially disabled, elderly persons with limited physical and mental abilities) or lack of experience and know-how (e.g., older children).
• This product may be used by persons with reduced physical, sensory, or mental abilities or lack of experience and know-how, provided they are supervised or have received instructions for safe use and understand potential hazards. Children must not play with the product. The product must not be cleaned or maintained by children. Keep children under eight years of age away from the product and its accessories.
• Do not insert any objects into the product.
• Do not leave the product unattended during operation.
• The product is not a toy. Keep the product, accessories, and packaging materials away from children and animals to prevent accidents and suffocation.
• For photographic lighting purposes only. Not suitable for permanent room lighting.

Usage Restrictions

• Do not film car, bus, bicycle, motorbike, or train drivers while driving this product, as glare could cause an accident. This also applies to unlisted persons or groups if glare could cause an accident.
• Do not shine directly into the eyes of people or animals, as this may cause damage to the retina, visual disturbances, and even blindness.
• Ensure adequate ventilation during operation. Never cover the ventilation slits of the unit.
• Do not use or store the unit in high temperatures or in closed rooms exposed to direct sunlight. The product should not be used in ambient temperatures above 40°C.

Disposal

Dispose of the packaging according to its type. Use local possibilities for collecting paper, cardboard, and other materials (applicable in the European Union and other European countries with systems for separate collection of recyclable materials).

[WEEE symbol] Devices marked with this symbol must not be disposed of with household waste! You are legally obliged to dispose of old devices separately from household waste. Information on collection points that accept old appliances free of charge can be obtained from your local authority or town council.

Conformity

Rollei GmbH & Co. KG hereby declares that the radio system type "Rollei Lumen Studio 100 Bi-Color" complies with Directive 2014/53/EU.

The complete text of the EU Declaration of Conformity can be downloaded at: www.rollei.de/egk/lumenstudio100bi-color

[CE marking]

Contact Information

Rollei GmbH & Co. KG

In de Tarpen 42

22848 Norderstedt

Germany

Service Hotline: +49 40 270750277

Website: www.rollei.com

Follow us: facebook.com/rollei.foto.de | instagram.com/rollei_de