⚠️ WARNING: Avoid serious injury or death to your child. You must read and understand the Seat Insert instructions and the instructions in the User Guide. Do not use Seat Insert with child weighing more than 40 lbs. (18 kg). If you do not understand these instructions, call Chicco at 1-877-424-4226.
IMPORTANT: Please also refer to the instructions that came with your product.
Kit Includes:
- 1 Seat Insert
- 1 Newborn Wedge
- 1 Head Rest
- 2 Shoulder Pads
IMPORTANT: Use all components together for a child who is from 0-4 months old.
Instructions
Step 1: Release the Harness Buckle by pressing the button on the center of the Buckle. Then recline the Seat Back to the lowest position. (Diagram: Shows releasing a buckle and reclining a seat back.)
Step 2: Slide the Shoulder Straps from the Shoulder Pads, as shown. The Shoulder Pads will still be attached to the D-Ring. Allow them to hang behind the Shoulder Straps for later use. (Diagram: Shows shoulder straps being detached from shoulder pads, which remain attached to a D-ring.)
Step 3: Place the Newborn Wedge on the Stroller seat with the slits pointing down. Guide both waist straps up into the Newborn Wedge slits, as shown. Make sure the straps are not twisted. (Diagram: Shows the placement of the newborn wedge on a stroller seat and how waist straps are threaded through its slits.)
Step 4: Place the Seat Insert in front of the Newborn Wedge on the Seat. Make sure to attach both sections of hook and loop together. (Diagram: Shows the main seat insert being placed in front of the wedge and hook-and-loop fasteners being joined.) IMPORTANT: Remove the Newborn Wedge when child reaches 4 months old.
Step 5: Thread the Crotch Strap and Crotch Strap Pad up through the opening on the Seat Insert. (Diagram: Shows the crotch strap and its pad being threaded through a specific opening on the seat insert.)
Step 6: Then thread the Waist Belt Straps (A) through the vertical openings. Thread the Shoulder Straps (B) through the opening at or just above child's shoulders. Only use the bottom 2 shoulder strap openings when using the wedge behind the insert. (Diagram: Illustrates threading waist belt straps through side openings and shoulder straps through upper openings.) IMPORTANT: The top 2 shoulder strap openings may be used when the Wedge and Headrest are removed.
Step 7: Make sure the Seat Flaps lay on top of the side Seat Back Flaps. (Diagram: Shows the seat insert's side flaps positioned over the stroller seat's back flaps.) IMPORTANT: Seat Insert may be used until the child reaches 40 lbs.
Step 8: To attach the Headrest, Thread the attachment straps through the set of openings just above the shoulder straps. Pull the top of the Seat Insert forward, attach the hook and loop sections together. (Diagram: Shows headrest attachment straps being threaded and hook-and-loop fasteners being secured at the top of the seat insert.) IMPORTANT: Do not use the Headrest without the Seat Insert.
Step 9: Slide the Shoulder Pad onto the Shoulder Strap, as shown. Repeat for the other shoulder pad. (Diagram: Shows a shoulder pad being slid onto a shoulder strap.)
Step 10: Buckle the Harness and make sure the straps are not twisted. (Diagram: Shows the harness buckles being fastened.) IMPORTANT: Stroller Seat must be in the full reclined position when using for infant from 0-4 months.
Cleaning Instructions:
Fabrics may be spot-cleaned with mild soap and water, or machine washed in cold water on delicate cycle using mild detergent. Attach hook and loop parts together before washing. Hang to dry. DO NOT BLEACH.
Please consult your product manual for additional care and maintenance instructions.
Contact Chicco Customer Service at 1-877-424-4226 for assistance in removing or replacing the softgoods.
