F10pro 3-Axis Gimbal Stabilizer

Quick Start: Install and Balance Smartphone

Before powering on, remove your smartphone case and place the smartphone onto the phone holder, ensuring it is centered.

Position the smartphone in the holder so it resists the motor, as shown in the illustration, to prevent vibration during use.

Loosen the balance knob and adjust the balance arm until the smartphone is in a nearly balanced condition.

Visuals depict correct smartphone balancing with the device centered and stable (indicated by checkmarks), and incorrect balancing with the phone off-center or tilted (indicated by crosses).

Power On/Off

Power On: Press the power button until the indicator lights turn on.

An illustration points to the 'Power on/off' button on the gimbal's handle.

Power Off: Press the power button until the indicator lights turn off.

Connect to Bluetooth via Native Camera

With the gimbal powered on, enable Bluetooth on your smartphone. Navigate to your smartphone's Bluetooth settings and select the device name "GP5-xxxx" to connect.

Instruction for Four Modes

All Follow (AF): The Roll axis is locked. The Pan axis (left/right) and Tilt axis (up/down) follow the movement of the handle. This is the default mode upon powering on.

Half Follow (HF): Tilt and Roll axes are locked. The Pan axis rotates smoothly (left/right) with the handle.

Lock Full (LF): Pan, Tilt, and Roll axes are all locked. The camera remains still and stable, unable to follow handle movements.

First Person View (FPV): Pan, Tilt, and Roll axes follow the movement of the handle.

Phone Go Mode: Long press the shutter button until the AF light flashes to enter Phone Go mode. Release the shutter button to exit.

Diagrams illustrate the gimbal's three axes (Tilt, Roll, Pan) and show how they move in different operational modes (All Follow, Half Follow, Lock Full, First Person View). Icons representing these modes are also shown.

Get to Know the Gimbal

Joystick: Controls the gimbal movement up/down and left/right.

Power Button: Long press to power on/off. Double press to switch between front/rear camera. Triple press to switch between video/photo modes (works in APP after connecting to Bluetooth).

Mode Button: Single press switches between the four main modes. Double press recenters the gimbal. Triple press switches between portrait/landscape mode.

Zoom: Controls zoom functionality.

Bluetooth Indicator: Shows connection status: Off (not connected), Flashing (connecting), On (connected).

Battery Level Indicators: High (67%-100%), Middle (4%-66%), Low (1%-3%).

Ports:

• Output Port: For charging the smartphone.
• Input Port: For charging the gimbal.

Shutter Button: Single press takes a picture or starts/stops video recording (works in APP after connecting to Bluetooth). Long press enters Phone Go mode.

A detailed diagram labels the gimbal's components: Joystick, Power button, Mode button, Zoom control, Bluetooth indicator, battery level indicators, and ports. The Shutter button functions are also described.

Switch Between Horizontal/Vertical Mode

Way 1: Press the Power Button Three Times

1. Place the gimbal in the desired orientation.
2. Press the power button three times to switch from horizontal to vertical mode.
3. Press the power button three times again to switch from vertical back to horizontal mode. The gimbal may also automatically return to horizontal mode when held upright.

Reminder: FPV mode does not support this operation.

Illustrations show the gimbal in horizontal orientation, with an arrow indicating pressing the power button three times to switch to vertical mode, and vice-versa.

Way 2: Gesture Switch

1. Hold the gimbal perpendicular to the ground.
2. Tilt the gimbal left or right by 70 degrees.

A sequence of images demonstrates gesture control for switching modes: holding the gimbal perpendicular, then tilting it left or right.

Way 3: Rotate the Smartphone Clamp

1. Loosen the clamp knob.
2. Rotate the smartphone clamp by 90 degrees.
3. Tighten the clamp knob.

Images show the process of loosening a clamp knob, rotating the smartphone clamp by 90 degrees, and then tightening the knob to switch between horizontal and vertical smartphone mounting.

Charging

Charge for Gimbal: Connect the input port to a power source.

Charge for Smartphone: Connect the output port to the smartphone. Note: When the smartphone is mounted horizontally, an L-type charging connector may be required.

Illustrations show the gimbal connected to a charger for the gimbal itself, and another showing a smartphone connected to the gimbal's output port for charging.

About APP

This product supports native camera functionality for basic stable shooting without an external app. For advanced features like panoramic shots, zoom, tracking, and time-lapse, download and use the "Gimbal Pro" app.

Download the Gimbal Pro APP by searching "Gimbal pro" on the Google Play or App Store.

Gimbal Pro requires iOS 12.0 or later, or Android 8.0 or later.

Connect to Gimbal Pro APP:

1. Go to the settings page on your smartphone.
2. Go to Bluetooth settings, find, and click the device name "GP5_xxxx".

Specifications

Caution

1. Ensure the motor rotation is not blocked by external force during and after the stabilizer is powered on.
2. Do not contact with seawater or corrosive liquids.
3. Do not disassemble the stabilizer, except for detachable accessories mentioned in the manual.
4. If the motor works continuously for a long time, the surface temperature may become too high.
5. It is strictly forbidden to drop or collide with the stabilizer, as this may cause damage and abnormal operation.

Storage and Maintenance

1. Keep this product away from children and pets.
2. Do not place the product near heat sources (furnaces, heaters, etc.) or in a car during hot weather.
3. Store the product in a dry environment.
4. Do not overcharge or over-discharge the battery, as this can damage the battery cell.
5. Avoid using the product in environments with excessively high or low temperatures.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.