Instruction Manual for Bridgtek models including: pH Sensor Adapter, pH, Sensor Adapter, Adapter

Sensor Actuator QSG

Alvin Phee

Let’s Get Started! installation instructions.

Step 1. Connect the LDSBus USB Adapter to the PC with a USB -C to USB -A Cable . (Both to be purchased separately) Step 2. Attach one end of the cable

Sensors and Actuators QSG

DO Sensor Adapter - Long Distance Sensor

Isolated IO Controller - Long Distance Sensor

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
• Document:
  • References

File Info : application/pdf, 1 Pages, 449.99KB

Before we can use this LDSBus device, it has to be
configured.
Let's Get Started!

Step 1.
Connect the LDSBus USB Adapter to the PC with a USB-C to USB-A Cable.
(Both to be purchased separately)

Step 2.
Attach one end of the cable provided to the LDSBus device if
required.

Step 3.
Attach the other end of the cable to the LDSBus USB Adapter as
shown.

Please visit http://bit.ly/system-warranty or scan the QR code for warranty registration with the UUID and
Product Key below
STICKER AREA

Step 4.
Scan the QR code or visit the link provided below:
http://bit.ly/ldsbus-resources

Step 5.
Download the LDSBus Configuration Utility. Complete the
installation instructions.

Follow the LDSBus Configuration Utility guide to configure the device
name, device address and termination settings.

View the full information of this LDSBus device, application setup and
installation guides for further Instructions.



References