Flydigi Vader 2 Pro User Manual
Basic Operations
| Operation | Description | Button 1 | Button 2 |
| Power On/Off | Toggle the power switch to ON/OFF | A | B |
| Standby | If not used for more than 15 minutes, the controller will enter standby mode; press the + button to wake it up | B | A |
| Low Battery | When the battery level drops below 10%, status LED 2 will flash red. | X | Y |
| Charging | Connect the charging port to the charging cable. Status LED 2 will remain solid green. | Y | X |
| Fully Charged | After charging is complete, status LED 2 will turn off. | SELECT | + |
| Additional Buttons | The C, Z, M1, M4 buttons can be customized as additional buttons in the app. | START | HOME |
| Button Mapping | The mapping of buttons to key values in Switch mode can be found in the table on the right. | HOME | HOME |
| One-Key Wakeup | If paired and connected, in Switch standby mode, pressing the HOME button will wake up the Switch. | CAPTURE |
Connection Instructions
| Connection Method | Supported Modes | Indicator Light Explanation | Switching Method |
| USB Wired Connection | 360 Mode, Android Mode | Indicator Light 1 is white | Pressing the + button and the SELECT button simultaneously for three seconds can switch between 360 and Android modes. If switched to Android Mode, Indicator Light 2 will light up solid red. |
| Bluetooth Connected | Switch Mode | Indicator Light 1 is orange | Press the + button and the X button simultaneously for three seconds |
| 2.4GHz Receiver Connected | 360 Mode and Android Mode. | Indicator Light 1 Blue | Press the + button and the A button simultaneously for three seconds |
Operate On The Computer
Download "Flydigi Space Station"
Visit the official Flydigi website at "www.flydigi.com" to download the Flydigi Space Station. This application allows users to perform advanced adjustments on their controller and unlock additional hidden features.
Play Computer Games
Connect the receiver or data cable to the computer. The controller will be recognized automatically upon opening. The default 360 mode can be used directly on various gaming platforms. Switching to Android mode is suitable for specific scenarios like computer Android emulators. Simultaneously press and hold the + and SELECT buttons for three seconds to switch between 360 and Android modes. When switching to Android mode, both indicator lights 1 and 2 will light up in red.
Operate On The Cellphone, iPad & Tablet
STEP 1: Download "Flydigi Game Center"
Scan the QR code to download and install the Flydigi Game Center, or use a browser to visit the Flydigi official website at www.flydigi.com to download.
STEP 2: Bluetooth Connect To Cellphone
Go to Flydigi Game Center - Peripheral Management, click on 'Connect Controller,' and follow the in-app instructions to establish the controller connection.
Operate On The Switch
Connection Pairing
Turn on the controller, simultaneously press and hold the + button and the X button for three seconds to switch the controller to Switch mode. Turn on the Switch console, go to the [Controllers] option, and then, at this point, press and hold the + button for three seconds to successfully pair.
Other Settings
In Switch mode, users can also customize controller settings. Visit the Flydigi official website at www.flydigj.com to download the Flydigi Space Station for accessing additional hidden features, more operation instructions, troubleshooting solutions, and to scan the code for the complete version of the user manual.
