WorkPro
WorkCad3WorkPro
User Manual for WORK PRO models including: W WPE 24, Digital Audio Processor, W WPE 24 Digital Audio Processor, Audio Processor, Processor
WORK PRO WPE24 2x4 Mini-DSP | Pro Audio-Technik
File Info : application/pdf, 23 Pages, 1,006.82KB
DocumentDocumentWPE 24 User Manual Version1.5 WPE 24 USER MANUAL VERSION 1.5 WPE SERIES www.workpro.es 1 WPE 24 USER MANUAL VERSION 1.5 SAFETY INSTRUCTIONS 1. Read this manual carefully. 2. Follow all instructions and warnings. 3. Only use accessories specified by WORK PRO. 4. Follow the safety instructions of your country. 5. Be careful with sound levels. SYMBOLS The following symbols are used in this document: This symbol indicates a potential risk of harm to a person or damage to the product. You can also notify the user of the instructions that must be followed strictly to ensure the installation or safe operation of the product. This symbol notifies the user about the instructions that must be followed strictly to ensure the correct installation or operation of the product. This symbol notifies the user about additional information or optional instructions. WELCOME TO WORK PRO Thank you for choosing the WORK PRO WPE 44 system. This document contains essential information on the use of the system. Read this document carefully to become familiar with the system. Please check the WORK PRO website regularly to download the latest version of the document and software updates: https://www.workpro.es/ WPE SERIES www.workpro.es 2 WPE 24 USER MANUAL VERSION 1.5 CONTENT 1. INTRODUCTION.................................................................................................................................4 2. FEATURES..........................................................................................................................................4 3. PRODUCT DESCRIPTION....................................................................................................................5 Analog audio input.....................................................................................................................8 Analog audio output ..................................................................................................................8 LAN Port .....................................................................................................................................9 3.3.1. Main supply input........................................................................................................ 9 4. DEVICE SETUP .................................................................................................................................10 4.1.1. Setup through WorkCAD3 Configurator ................................................................... 10 Project saving and synchronization with the devices ..............................................................15 5. OSC COMMANDS ............................................................................................................................15 6. ACCESSORIES...................................................................................................................................20 WPE SERIES www.workpro.es 3 WPE 24 USER MANUAL VERSION 1.5 1. INTRODUCTION WPE 24 is a digital signal processor with external control capability. Its compact design and format make it perfect for use by audiovisual integrators. The device has balanced inputs and outputs to give them greater immunity against electromagnetic interference. The external control of this device is done thanks to its Ethernet connectivity, which can be done through the dedicated WorkCAD3 software or through OSC commands by third-party devices. 2. FEATURES Audio analog inputs Number of inputs Audio connector Input sensitivity Audio process per-input 2 balanced inputs Euroblock, 3 pin 3.81mm 14 dBu (balanced) (3.88 Vrms ) 4 filters Gain control Mute and Invert control Audio analog outputs Number of outputs Audio connector Input sensitivity Audio process per-output 4 servo-balanced outputs Euroblock, 3 pin 3.81mm +10 dBu (balanceado) (2.45 Vrms) 15 filters 2 crossover filters (High pass, Low Pass) Weighted matrix of sum of inputs Delay up to 8.19 ms Compressor/Limiter/Noise gate General SNR THD + N Bandwidth Sampling frequency Input/output filter types Number of memories Dimensions Weight > 100 dB < 0.01 % 20 Hz 24000 Hz 48000 Hz Low pass, High pass, Low Shelving, High Shelving, Band pass, Peak, Notch y All pass. 8 109mm×133.75mm×40.45 mm 360 g WPE SERIES www.workpro.es 4 WPE 24 USER MANUAL VERSION 1.5 Network Connector Control Protocol Ports Ethernet Main Supply External main supply PoE Class Consumption RJ-45 OSC over UDP y RUDP UDP 9000 / RUDP 9002 100 base TX 24 Vdc / 500 mA (Not incluided) Class 0 802.3af 3.6 W 3. PRODUCT DESCRIPTION 1. Reset button. Restore the device to its factory configuration 2. Next button. It allows to advance between and through the different screens of the display. 3. Display. It shows different features of the device. 4. Set button. It allows access to a certain display screen and set the digits of the different screens. 5. LAN port. Connection port to the local network, RJ45. 6. Main supply input. 12/24 Vdc 7. Analog audio input. Balanced inputs. Euroblock 3 pins, 3.81 mm per input. WPE 24 (2 INPUTS) 8. Analog audio output. Balanced outputs. Euroblock 3 pins, 3.81 mm per output. WPE 24 (4 OUTPUTS). WPE SERIES www.workpro.es 5 WPE 24 USER MANUAL VERSION 1.5 Display On the front panel you will find a display where you can view different parameters of the unit. To navigate between the different parameters press the NEXT button. If you want to edit any of these parameters, press the SET button to access it. Next, specify which parameters are editable and which are not: LEVELS, not editable STATIC IP, editable DYNAMIC IP, not editable MAC, not editable ACTIVE PRESET, editable. LEVELS, It shows the signal level present in the inputs and outputs. It is the default screen of the device and to which it returns after 10 seconds without editing a screen. Next to each input/output there is a bar which indicates the level according to the attached chart: Bar amplitude (from 0 to 8) 8 7 6 5 4 3 2 1 None Level (dBFS) -3 dBFs / 0 dBFs -6 dBFs / -3 dBFs -9 dBFs / -6 dBFs -18 dBFs / -9 dBFs -26 dBFs / -18 dBFs -40 dBFs / -26 dBFs -60 dBFs / -40 dBFs -80 dBFs / -60 dBFs < 80 dBFs WPE SERIES www.workpro.es 6 WPE 24 USER MANUAL VERSION 1.5 STATIC IP, this is the static IP address. The device has a static IP address by default in the subnet 10.0.0.0/8. For editing, use the buttons SET (to select and set the digit) and NEXT (for editing upwards). NOTE: ENABLED by default NOTE: After a change, the device restarts to confirm the value. DYNAMIC IP, this is the dynamic IP address of the device, which is assigned by a DHCP server. NOTE: DISABLED by default. Only displayed when selecting this mode by software. MAC. this is the physical address of the device. ACTIVE Preset. Allows you to select one of the 8 presets available for activation. WPE SERIES www.workpro.es 7 WPE 24 USER MANUAL VERSION 1.5 Analog audio input The connection of the input signal to the device can be balanced or unbalanced. Keep in mind that balanced signals provide 6 dB more level than unbalanced signals of equal amplitude. UNBALANCED BALANCED Analog audio output The analog audio output of the device can be balanced or unbalanced according to the selected extraction mode. To do this, keep in mind the following types of connection: UNBALANCED WPE SERIES www.workpro.es 8 WPE 24 USER MANUAL VERSION 1.5 BALANCED LAN Port RJ45 port for LAN connection. Allows PoE power (Class 0 802.3af) Next to the RJ45 connector you will find two LEDs indicating the status of the device: LINK (green) Indicates that the WPE 24 is connected to the LAN ACT (orange) Indicates that packets are being sent or received 3.3.1. Main supply input Power input for external source. The admitted voltage can be between 12/24 Vdc, with a minimum current of 500 mA. Check the current polarity before connecting the main supply The external power supply is not provided with the device. WPE SERIES www.workpro.es 9 WPE 24 USER MANUAL VERSION 1.5 4. DEVICE SETUP The configuration of the device can be done by software (WorkCAD3 configurator) or through display. The most comfortable way for the user is through WorkCAD3 configurator, since it will have access to all the functionalities of the device and you can also see the interaction of your device with the rest of the BlueLine Digital MKII network elements. 4.1.1. Setup through WorkCAD3 Configurator After making the configuration at the IP level of the device and updating it if necessary (see WorkCAD3 Configurator user manual), proceed with its configuration. If you click with the left mouse button on the device, the configuration interface will open where the following parameters appear: - VIEW · DSP. It allows to choose the visualization of the processing fields. · Preset button. It allows to manage the presets and the starting mode of the device. - MASTER: It allows the modification both graphically and numerically of the general volume control of the device. In addition, it has a MUTE button. - DSP Area: It is the area where the processing of the inputs and outputs of the device is configured · Input and output selection field. It allows to choose the I/O on which you want to work. The parameters to control will vary depending on whether an input or Output has been chosen · Gain. Field that allows controlling the volume or inverting the polarity of the selected I/O. WPE SERIES www.workpro.es 10 WPE 24 USER MANUAL VERSION 1.5 - Inputs processor: · EQUALIZER. It has 4 filters applicable to each of the entries. To apply them, we must select the band (filter number), the type of filter, the frequency, the gain and the Q factor. It is also possible to apply a filter using the mouse and acting on the points that appear in the image and represent the 4 available filters. -Output processor: · EQUALIZER. It has 15 filters applicable to each of the outputs. To apply them, select the band (filter number), the type of filter, the frequency, the gain and the Q factor. It It is also possible to apply a filter by using the mouse and acting on the points that appear in the image and represent the 15 available filters. WPE SERIES www.workpro.es 11 WPE 24 USER MANUAL VERSION 1.5 MATRIX. In this section you can choose the weighted sum of the inputs to be sent to each output. The input of each input can be entered both graphically and numerically. For each input the option of Mute and Invert is available. WPE SERIES www.workpro.es 12 WPE 24 USER MANUAL VERSION 1.5 · XOVER: In this section you can apply crossover filters on the selected output. We have high pass filter and low pass. We must select the cut-off frequency (20Hz-20KHz), filter order (eighth maximum) and filter type (Butterworth, Linkwitz-Riley, Bessel). For Linkwitz-Riley filters the orders increase by two. · DELAY. In this section a delay of up to 8.19 ms can be applied to the selected output. This value can be entered both graphically and numerically. The units of measurement can be samples, ms, meters and feet. WPE SERIES www.workpro.es 13 WPE 24 USER MANUAL VERSION 1.5 DYNAMICS. A Limiter / Compressor / Noise Gate is available for each output. Enables. Field dedicated to the activation of the Limiter, Compressor and Noise Gate. Limiter Threshold. Limiter threshold. Compressor Times. Attack and Release times for the Compressor. Ratios. Ratios for Noise Gate and Compressor. · Presets. Allows to manage the presets and the starting mode of the device. · RENAME. Allows to rename the preset selected previously. · RECALL. Allows to load the selected preset · SAVE. Allows to save the configuration of the selected preset. EXPORT. Allows to export all presets to a file with the .wpf3_wpe_preset extension. The information not saved in a preset will not be exported. · IMPORT. Allows to import all presets from a file with .wpf3_wpe_preset · Startup preset. Allows to manage the starting method of the device. · Last Loaded. The device will start from the last load preset. · Last LIVE. The device will stsart with the configuration when it was turned off. WPE SERIES www.workpro.es 14 WPE 24 USER MANUAL VERSION 1.5 Project saving and synchronization with the devices For the offline or online project creation and synchronization with the device, go to Synchronization device in the WorkCAD3- Configurator: Link: WORKCAD 3 CONFIGURATOR 5. OSC COMMANDS WPE 24/44 accepts OSC commands and ASCII commands via UDP, if you need more information about OSC protocol you can click on the next link. http://opensoundcontrol.org/introduction-osc The next list shows OSC and ASCII commands, for the OSC commands the form to send them will depend on the App that be used, on the list bellow you can see all the OSC commands with its syntax: path, type of data and data. For the ASCII commands we use the same syntax that OSC commands, with the difference that the commands begin with "//", and the separation between path, type of data and data is ";". WPE SERIES www.workpro.es 15 WPE 24 USER MANUAL VERSION 1.5 For the selection of input and outputs through OSC/ASCII commands you should use the way below: Single selection x Group selection, one by one [x,y,z,...] Group selection, from-to [x-y] Default UDP port (Foreign/Local) = 9000 hod OSC / ASCII Command Type Data Use of Data Register Listener /osc/add,[x] //osc/add;i;[x]; i [x] = UDP port1 Register communication, it give feeback of any parameter change. Unregister Listener /osc/del,[x] //osc/del;i;[x]; i [x] = UDP port1 Unregister communication Parameters /osc/all,1 i status //osc/all;i;1; Status parameters feedback Push /presets/live/push //presets/live/push;; Save state Pop /presets/live/pop //presets/live/pop;; Load state saved with Push Output Gain /out[x]/gain,[y][z][a] //out[x]/gain;f[y][z];[a]; f, [x] = Output channel Gain, mute and T/F, T/F [y] = Mute channel (Muted=T / invert of the output. Unmuted=F) [z] = Invert channel (Inverted=T / Not inverted=F) [a] = Gain value (dBs) 1 "0", Source port. WPE SERIES www.workpro.es 16 WPE 24 USER MANUAL VERSION 1.5 Output Gain: /out[x]/gain/value,[y] Value //out[x]/gain/value;f;[y]; f [x] = Output channel Gain value of the [y] = Gain value output. (dBs) Output Gain /out[x]/gain/value Status //out[x]/gain/value;; [x] = Output channel Output gain feeback Output Gain: /out[x]/gain/mute,[y] Mute //out[x]/gain/mute;[y]; Output Mute /out[x]/gain/mute Status //out[x]/gain/mute;; T,F [x] = Output channel Mute selected [y] = Mute channel output (Muted=T / Unmuted=F) [x] = Output channel Output mute feedback Output Gain: /out[x]/gain/fade,[y] Mute with Fade //out[x]/gain/fade;f;[y]; f [x] = Output channel Output fade in / fade out [y] = fade (in=0.00, out=1.00) Output Gain: /out[x]/gain/value/inc,[y] f Increment //out[x]/gain/value/inc;f;[y]; [x] = Output channel [y] = Gain steps (dBs) Increment output gain by steps Mixer /out[x]/matrix/in[y],[z][a][b] f //out[x]/matrix/in[y];f[z][a];[b]; [x] = Output channel [y] = Input channel [z] = Mute channel (Muted=T / Unmuted=F) Mix the selected inputs to the selected output, and inputs set up (mute, invert) WPE SERIES www.workpro.es 17 WPE 24 USER MANUAL VERSION 1.5 Mixer: Value /out[x]/matrix/in[y]/value,[z] f //out[x]/matrix/in[y]/value;f;[z]; [a] = Invert channel (Inverted=T / Not inverted=F) [b] = Input gain value (dBs) [x] = Output channel [y] = Input channel Mix the selected inputs to the selected output [z] = Input gain value (dBs) Mixer: /out[x]/matrix/in[y]/value Value Status //out[x]/matrix/in[y]/value;; [x] = Output channel Mixer status [y] = Input channel Mixer: Mute /out[x]/matrix/in[y]/mute,[z] /out[x]/matrix/in[y]/mute;[z]; T,F [x] = Output channel Mute the selected [y] = Input channel inputs to the selected output [z] = Mute input channel (Muted=T / Unmuted=F) Mixer: Mute /out[x]/matrix/in[y]/fade,[z] f with Fade //out[x]/matrix/in[y]/fade;f;[z]; Mixer: Increment /out[x]/matrix/in[y]/value/inc, f [z] //out[x]/matrix/in[y]/value/inc;f; [z]; [x] = Output channel [y] = Input channel [z] = fade (in=0.00, out=1.00) Fade in / fade out of the selected inputs to the selected output [x] = Output channel [y] = Input channel [z] = Input gain steps (dBs) Mix the selected inputs to the selected output by steps Equalizer Output /out[x]/eq/[y],[z][a][b][c] ifff //out[x]/eq/[y];ifff;[z];[a];[b];[c] ; [x] = Output channel [y] = Band Index Set output equalizer WPE SERIES www.workpro.es 18 WPE 24 USER MANUAL VERSION 1.5 [z] = Filter Type2 [a] = frequency (Hz) [z] = Gain (dBs) [z] = Quality factor [0.01,10] CrossOver /out[x]/xover,[y][z][a][b][c][d] iiiiff [x] = Output channel Set outputs //out[x]/xover;iiiiff;[y];[z];[a]; crossover filters [y] = High pass type [b];[c];[d]; [z] = Low pass type [a] = High pass Type order [b] = Low pass Type order [c] = High pass cut frequency [d] = Low pass cut frequency Limiter / Compressor /out[x]/Dynamic,[y][z][a][b][c] [d][e][f][g][h][i][j][k][l][m][n] //out[x]//dynamic;ffffffffffffFFF F;[y];[z];[a];[b];[c];[d];[e];[f]; [g];[h];[i];[j];[k];[l];[m];[n]; f, f, f, f, f, f, f, f, f, f, f, f, T/F, T/F, T/F, T/F [x] = Output channel [y] = Attack time [z] = Release time [a] = Gain [b] = Noise gate ratio Set outputs dynamics [c] = Lineal threshold [d] = Compression ratio 2 Bypass=0, Peak = 1, Low pass=2, High pass=3, Low shelving=4, High shelving=5, Band pass=6, Notch=7, All pass=8 WPE SERIES www.workpro.es 19 WPE 24 USER MANUAL VERSION 1.5 Presets: Execute /presets/edit/exec,[x] //presets/edit/exec;i;[x]; Presets: Execute Status /presets/edit/exec //presets/edit/exec;; Presets: Copy to preset /presets/live/store,[x] //presets/live/store;i;[x]; Presets: Get ex /presets/get,[x][y] //presets/get;i[x];[y]; [e] = Compression threshold [f] = Limiter threshold [g] = Box impedance [h] = Box power [i] = Amplier power [j] = Amplier gain [k] = Enable noise gate [l] = Enable Lineal [m] = Enable compression [n] = Enable Limiter i [x] = Preset to execute Executed preset Preset status i [x] = Preset number Save to preset i,T/F [x] = Live or Preset to get (live=T,preset=F) Get live or preset info [y] = Part to get (all = -1) 6. ACCESSORIES The WPE 24 includes a series of accessories for mounting on a wall or with the rack accessory BL AR 19 (not included): - 2x Wings for mounting in a wall. - 4 screws. - 1x Bar to joint two devices. WPE SERIES www.workpro.es 20 WPE 24 USER MANUAL VERSION 1.5 - Optional BL AR 19 Fixing accessory for standard rack 19" 1 HU to accommodate up to 4 devices of the WPE Series /WPE 24/WPE 44) series. WPE SERIES www.workpro.es 21 WPE 24 USER MANUAL VERSION 1.5 WPE SERIES www.workpro.es 22