Product Information
Product Name: LS01
Model Name: SOUL 3
Material: 80g writing paper
Size: 58*42mm
Printing: Double-fold black and white printing
? Note: The finished product does not have a black border.
Contents
- English: Pages 1-6
- Deutsche: Pages 7-14
- Français: Pages 15-21
- Italiano: Pages 22-28
- Español: Pages 29-34
Specifications
Bluetooth Version: Bluetooth V5.0
Bluetooth Protocol: SBC, Fast_stream
Operation: KLASSE2
Frequency Range: 2.4GHz - 2.480GHz
Bluetooth Distance: 10m (up to 33 feet)
Working Current: 38mA
Battery Capacity: 170mAh
Serial Supply Voltage: DC+5V ~ DC+16V
Connector: 30pin dock, 3.5mm aux
Device Name: SOUL 3
Diagram
The diagram illustrates the ZIOCOM SOUL 3 device with the following labeled parts:
- 1. ON/OFF Switch
- 2. 3.5mm AUX Port
- 3. 30 Pin Connector
- 4. OLED Screen
- 5. Connected Device Status Indicator (blinks when pairing, solid when connected)
- 6. Play and Pause Status Indicator
- 7. Volume/Status Indicator
- 8. Device Name Display (SOUL 3)
Power Management
Power On
1. Turn on SOUL 3; the screen will light up and show "SOUL 3". The first Bluetooth icon ? at the left corner will begin to flash, indicating it is in pairing mode.
Pairing Mode: Bluetooth icon ? flashes.
Successfully Connected: Bluetooth icon ? stops flashing.
Power Off
Turn off SOUL 3; the screen goes off.
Connection Methods
The first way to connect - 30 Pin Connection
1. Turn on SOUL 3, plug SOUL 3 into the dock speaker. The speaker will turn to "iPod mode" automatically. (If your speaker cannot turn to "iPod mode" automatically, the speaker will change to the "iPod mode" manually.)
2. In the pairing mode, the first Bluetooth icon ? will begin to flash. Turn on Bluetooth function of your cellphone and search "SOUL 3". Click to pair. If successfully connected, the Bluetooth icon ? stops flashing. Enter code "0000" if needed.
? PLEASE NOTE: For some 30pin dock speakers, when SOUL 3 is successfully connected but no sound comes out, you can try to pair SOUL 3 with speaker via 3.5mm audio cable. Make sure your speaker is in AUX mode first.
The second way to connect - 3.5mm Aux Connection
SOUL 3 is an upgraded Bluetooth receiver built-in battery ?, not only for 30pin dock speakers, but also for other Bluetooth speaker/headphone. Turn on the Bluetooth speaker/headphone.
1. Turn on SOUL 3.
2. Turn on Bluetooth function of your cellphone and search "SOUL 3", click to pair. If successfully connected, the first Bluetooth icon ? stops flashing.
3. Connect your SOUL 3 to your Bluetooth speaker/headphone via a 3.5mm connection cable.
If successfully connected, you can enjoy music or audio wireless now.
Connect with Two Cellphones
1. First, pair SOUL 3 with your first cellphone. Ensure it is successfully connected.
2. Then, turn on the Bluetooth function of your second cellphone and search "SOUL 3". Click to pair. If successfully connected, the second Bluetooth icon ? will show up.
Note: If you successfully connect with the second cellphone, the first cellphone will automatically disconnect. To reconnect, you need to manually reconnect the first cellphone.
Note: SOUL 3 can only play music from one cellphone at a time. To play music from the second cellphone, you must pause or stop music on the first cellphone.
Low Battery Alarm
When the battery voltage is below 3.1V, SOUL 3 will alarm with prompt sound ❗ and will automatically power off when voltage is below 2.8V.
? PLEASE NOTE: When plugged on the 30pin dock speaker, it will charge automatically and stop charging if get full power. It can only get charged by 30pin port.
Support Information
For after-sale service and technical support, please contact:
Email: support@ziocomdirect.com
