LG UltraGear Monitors

Introduction

?️ This document provides a quick setup guide for the LG UltraGear monitors, including assembly instructions, connection details, specifications, and warranty information.

?️ Please read this manual carefully before operating your set and retain it for future reference.

What's Included

? The package typically contains the following components:

• Monitor Panel
• Stand Base and Neck
• Power Adapter and Cable
• HDMI Cable
• USB Type-C to Type-A Cable (for upstream connection)
• DisplayPort Cable
• Documentation (Quick Setup Guide, Warranty Certificate)

⚠️ Note: Specific cables included may vary by region or model. It is recommended to use the supplied components.

Stand Assembly

? Follow these steps to assemble the monitor stand:

1. Place the monitor face down on a soft, flat surface to prevent scratches.
2. Attach the stand neck to the monitor's rear mounting bracket. Secure it using the provided screws.
3. Attach the stand base to the stand neck. Ensure it locks securely into place.
4. If the stand neck has a release mechanism, follow the instructions to detach it from the monitor if needed for wall mounting or replacement.
5. Carefully turn the monitor upright and place it on the assembled stand.
6. The stand typically features a quick-release mechanism for easy detachment.

⚠️ Safety Warning: Handle the monitor with care. Avoid touching the screen directly. Ensure the monitor is placed on a stable surface or properly mounted.

Connections

? The monitor features various ports for connecting external devices:

Rear Ports:

• SS USB (Upstream): Connect this port to your PC using the provided USB cable to enable the monitor's USB hub functionality.
• DP IN (DisplayPort Input): Connect to your PC's DisplayPort output.
• DP OUT (DisplayPort Output): Allows daisy-chaining to another monitor (if supported).
• HDMI IN: Connect to your PC or other devices via HDMI.
• HDMI OUT: (If applicable) Output HDMI signal.
• H/PO (Headphone/Audio Out): Connect headphones or external speakers.

⚠️ Important Note: Using non-standard cables (e.g., DVI to HDMI/DP) may cause compatibility issues. Always use the supplied cables for optimal performance and to prevent device malfunction.

Power Connection

? Connect the power adapter as follows:

1. Connect the power cord to the power adapter.
2. Connect the power adapter's DC-IN cable to the DC-IN port on the monitor's rear.
3. Plug the power cord into a wall outlet.

Ensure the power adapter and cables are correctly connected before powering on the monitor.

Specifications

Power Adapter Specifications

Input: 100-240 V~ 50/60 Hz 1.5 A or 1.6 A

Output: 19 V --- 3.3 A (for 27-inch models) / 19 V --- 3.42 A (for 32-inch models)

Warranty Information (Argentina)

✅ This warranty certificate is valid only for equipment marketed, distributed, or acquired in the Argentine Republic by LG Electronics Argentina S.A. or an authorized distributor.

Warranty Requirements:

• The product must not have been altered in any way.
• The buyer must present the original purchase invoice with a legible purchase date.
• The defect or failure must not be caused by circumstances detailed under "What This Warranty Does Not Cover".

Warranty Period:

• Televisors, Monitors, Projectors: 1 Year (computed from the purchase date).

What This Warranty Covers:

LG guarantees free repair of the product if it presents manufacturing defects or failures under normal use within the warranty period. Replacement will only occur if the authorized service center determines the product or part is irreparable.

What This Warranty Does Not Cover:

• Improper or non-domestic use.
• Power surges or drops.
• Intervention by unauthorized personnel.
• Installation not following technical specifications.
• Physical damage (scratches, drops, accidents).
• Water damage, fire, natural disasters.
• Transportation by third parties not affiliated with LG or authorized service centers.
• Connection to incompatible electrical grids or electronic devices.
• Connection of other electrical appliances.

How to Request Technical Assistance:

? Contact LG Customer Service (Whatsapp +54 11 5031-8966 or 0800-888-5454). You will be informed of the nearest authorized service center or assigned a service number. When service personnel inspect the product, the buyer must present the original invoice and this warranty certificate, detailing the reason for the service request.

? For more information on warranty and customer support, please visit www.lg.com or www.lg.com/ar/soporte/contactenos.

Customer Service Center: Tel: 0800-888-5454, 11-5031-8966.

Address: Juramento 1775, Floor 13, (C1428DNA) Buenos Aires, Argentina.

Additional Information

? You can download manuals from the LG website: www.lg.com.

Product Model: Consult the model on the manual cover.

Document Code: *MFL72127907* (2405-REV00)