Smart Instant Thermometer User Manual

Product Overview

This document provides instructions for the Smart Instant Thermometer, model BTH04.

Key Features:

• LCD display
• Hold/Max/Min function
• Backlight
• Pairing and °C/°F unit change function
• P1 port for probe connection
• Battery compartment

Diagram: Thermometer Components

The thermometer features an LCD display, a button for Hold/Max/Min readings and backlight, a button for pairing and unit change (°C/°F), a P1 port, and a battery compartment.

Getting Started

1. Unfold the probe to power on the thermometer. Unfolding the probe also allows for checking the instant temperature.
2. Press the Hold/Max/Min button to hold the current temperature reading or view maximum/minimum records.
3. Press the Backlight button to illuminate the LCD screen for 10 seconds, useful in dark environments.
4. To change the temperature unit (°C/°F), press and hold the °C/°F change button for 3 seconds until the display updates.
5. For detecting temperatures inside an oven or grill, plug the probe into the P1 port. The LCD will display "P1" and the current temperature. In this mode, other buttons are inactive.

Using the APP

1. Scan the provided QR code (or search for the app) to download the companion mobile application.
2. Ensure your phone's Bluetooth is enabled. Open the app.
3. Tap "Get started". Press the Pairing button on the thermometer. If the device is not found, tap "Pairing by the device name" to locate the thermometer.
4. Once paired, the app interface will display temperature readings and settings.
5. Tap "No preset" to select pre-defined temperature targets or set your own custom temperatures. The app will alert you when the target temperature is reached.
6. Tap the "Clock" icon to set up the Timer function.
7. To adjust alarm settings, tap the settings icon (usually in the top right corner) to configure units, time per channel, alarm interval, and other features.
8. For assistance or questions, use the "feedback & support" section within the app.
9. If you have purchased a new thermometer, delete the previously paired device from your phone's Bluetooth settings and the app before connecting the new one.

Diagram: App Interface Screenshots

The app displays temperature readings, allows selection of preset or custom temperature targets with alerts, timer settings, and general device configuration options.

Helpful Hints

• Do not immerse the probe in water during cleaning.
• Avoid using the metal probe in a microwave oven.
• Ensure the probe and its wire do not come into contact with open flames.
• Try to avoid the probe touching bone or areas with heavy fat, as this can cause rapid temperature fluctuations.

Cautions

• Do not expose the product to direct heat sources exceeding 65°C (149°F) for extended periods, as plastic components, the screen, batteries, and buttons may be damaged.
• Keep the stainless-steel probe sensor and wires away from children.
• Do not touch the hot probe with bare hands. Use a heat-resistant glove during and after cooking.
• The thermometer is not waterproof; do not use it in the rain.
• Clean the probe with a damp cloth; do not immerse it in water or use a dishwasher.
• The probe is sharp and not a toy. Keep it away from children and do not point it towards eyes.
• Do not leave the thermometer inside an oven or microwave oven.
• When measuring temperatures above 80°C (176°F), ensure your hands are properly protected to prevent scalding.

Technical Specification

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirement. The device can be used in an uncontrolled environment without restriction.

Diagram: Compliance Marks and Availability

The device is marked with CE and FCC ID: 2AZI4-BTH04. It is manufactured in China. The companion app is available on the App Store and for Android on Google Play.