Instruction Manual for HYTRONIK models including: Built-in, HYTRONIK, Microwave, Motion Sensor, with, 5.0 SIG Mesh, HC005S, BT
5. Additional Information / . Wall mounted detection pattern (m). 1. For full explanation of Hytronik Photocell AdvanceTM technology, please kindly refer to www.hytronik.com/download...
Installation and Instruction Manual HC005S/BT 3. Installation Mechanical Structure & Dimensions Built-in Microwave Motion Sensor with 5.0 SIG Mesh
Installation and Instruction Manual Built-in Microwave Motion Sensor with ON/OFF CONTROL 5.0 SIG Mesh HC005S/BT 1. Technical Specifications Operation frequency Transmission power Range (Typical indoor) Protocol Operating voltage Stand-by power Load ratings Warming-up Sensor principle Detection range (Max.)* Detection angle Operation temperature Case temperature(MAX.) IP rating EMC standard (EMC) Safety standard (LVD) RED Certification 2.4 GHz - 2.483 GHz 4 dBm 10~30m 5.0 SIG Mesh 220~240VAC 50/60Hz <1W 300VA(capacitive),400W(resistive) 20s High Frequency (microwave) Max installation height: 6m Max detection range10m (diameter) 30°~150° Ta:-20OC~+50OC Tc:+75° IP20 EN55015, EN61000, EN61547 EN60669-1/-2-1 AS/NZS60669-1/-2-1 EN300328, EN301489-1/-17,EN62479, Semko,CB, CE , EMC, RED, RCM,UKCA 3. Installation Mechanical Structure & Dimensions Photocell AdvanceTM Daylight sensor Antenna module Bluetooth module Power supply 220-240V out control 65 71.7 80.5 4.2 36.5 23.8 24.9 26 12.1 2. Download the App Free App for set-up and commissioning 5.0 SIG mesh iOS 10.0 or later Android 5.0 or later Photocell AdvanceTM Daylight sensor Antenna module Bluetooth module Power supply 220-240V out control 36.5 43.8 50 Web app/platform: iot.koolmesh.com 4.2 65 23.8 26 HBHC25-20200302-A0 Wire Preparation Wiring Diagram 0.75 - 1.5mm 8mm To make or release the wire from the terminal, use a screwdriver to push down the button. Control gear Control gear Control gear Optional accessory: Reinforced Bluetooth antenna For some special Applications, customers may need a larger Bluetooth transmission for both smartphone to device and device to device. Thanks to the reinforced Bluetooth antenna, with it being added to the sensor, the transmission distance(smartphone to device) enlarges to 20m, the distance of device to device is around 50m. 31.2 48.7 Installation hole 6.5mm Bluetooth antenna 9.5 12.7 4. Detection Pattern 0 5 9 Wall mounted height (m) Ceiling mounted height(m) 10% 30% 50% 75% 6 0 10% 30% 50% 75% 4 Ceiling mounted detection pattern (m) Wall mounted detection pattern (m) 5. Additional Information / Documents 1. For full explanation of Hytronik Photocell AdvanceTM technology, please kindly refer to www.hytronik.com/download ->knowledge ->Introduction of Photocell Advance 2. To learn more about detailed product features/functions, please refer to www.hytronik.com/download ->knowledge ->Introduction of App Scenes and Product Functions 3. Regarding precautions for Bluetooth product installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Bluetooth Products - Precautions for Product Installation and Operation 4. Regarding precautions for microwave sensor installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Microwave Sensors - Precautions for Product Installation and Operation 5. Data sheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/bluetooth technology ->Bluetooth Sensors 6. Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy Subject to change without notice. HBHC25-20200302-A0Adobe PDF library 15.00 Adobe Illustrator CC 23.0 (Windows)