Husqvarna T25-6 Tiller - Repair Parts
Model No. T 25-6, Product No. 106 23 12-80
Diagram of Tiller Components
The diagram illustrates the various components of the Husqvarna T25-6 Tiller. Key parts are identified with numbers that correspond to the parts list below.
Key Components Illustrated:
- Handlebars (1, 2, 3)
- Engine (40, 42)
- Transmission Housing (5)
- Wheels (75)
- Tines/Blades (69, 71)
- Belts and Pulleys (55, 66, 67, 68)
- Control Levers and Cables (31, 62, 77)
Parts List
The following table lists the repair parts for the Husqvarna T25-6 Tiller. Each entry includes a key number, part number, description in English, and the French designation.
| Key No. | Part No. | Description | Désignation | Qty |
|---|---|---|---|---|
| 1 | 531 00 84-31 | Complete casing, flanged (Black) | Carter complet à jonc (Noir) | 1 |
| 2 | 531 00 84-32 | Black handlebars (top part)(GXH 50) | Guidon noir (partie haute)(GXH 50) | 1 |
| 3 | 531 00 84-33 | Black handlebars (bottom right-hand part) | Guidon noir (partie droite basse) | 1 |
| 4 | 531 00 84-34 | Black handlebars (bottom left-hand part) | Guidon noir (partie gauche basse) | 1 |
| 5 | 531 00 84-35 | Flange (Black) | Jonc (Noir) | 1 |
| 6 | 531 00 84-36 | Transmission housing (Black) | Joue carter (Noir) | 2 |
| 30 | 531 00 84-37 | Spur (Black) | Éperon (Noir) | 1 |
| 31 | 531 00 84-40 | Handlebar fixing plate | Platine fixation guidon | 2 |
| 40 | 531 00 84-41 | Clutch lever | Levier embrayage | 1 |
| 41 | 531 00 84-44 | Belt cowl (Orange) | Capot courroie (Orange) | 1 |
| 42 | 531 00 84-45 | Chassis (Black) | Châssis (Noir) | 2 |
| 50 | 531 00 84-46 | Guard (black) | Protection (Noir) | 2 |
| 51 | 531 00 84-47 | Ball-race | Roulement | 2 |
| 52 | 519 65 31-90 | Ball-race | Roulement | 2 |
| 53 | 531 00 84-48 | Blade shaft | Arbre de travail | 1 |
| 54 | 531 00 84-49 | Joint | Joint feutre carter | 2 |
| 55 | 531 00 84-50 | Spacer | Entretoise plastique | 1 |
| 56 | 531 00 84-51 | Chain | Chaîne | 4 |
| 57 | 531 00 84-52 | Primary shaft | Arbre primaire | 1 |
| 58 | 531 00 84-53 | Spacer | Entretoise fixation moteur | 1 |
| 59 | 531 00 85-68 | Handle | Manette | 4 |
| 62 | 531 00 84-54 | Grip | Poignée PVC | 2 |
| 63 | 531 00 84-55 | Clutch cable | Câble embrayage | 1 |
| 65 | 519 65 34-57 | Runner | Galet embrayage | 1 |
| 66 | 531 00 84-56 | Motor pulley Forward gear (Shaft Ø15) | Poulie moteur Mav arbre Ø15 | 1 |
| 67 | 519 65 30-60 | Transmission pulley | Poulie transmission | 1 |
| 68 | 519 65 30-67 | Pulley shaft | Axe fixation poulie | 1 |
| 69 | 531 00 84-57 | Forward gear belt | Courroie Mav | 1 |
| 70 | 531 00 84-58 | Starter blade 30x3 Ø240 | Fraise départ 30x3 Ø240 | 1 |
| 71 | 531 00 84-59 | Internal bevelled cutter | Couteau biseau intérieur pli | 2 |
| 72 | 531 00 84-60 | Disk blade 30x3 Ø240 | Fraise disque. 30x3 Ø240 | 1 |
| 73 | 519 00 64-17 | Collar | Collier | 1 |
| 74 | 531 00 84-61 | Drive-belt guide Forward gear (GXH 50) | Guide courroie M.av (GXH 50) | 1 |
| 75 | 531 00 84-62 | Handlebar tightening lever | Poignée de serrage guidon | 2 |
| 76 | 531 00 85-69 | Transport wheel | Roue transport | 1 |
| 77 | 531 00 85-63 | External bevelled cutter | couteau biseau exterieur pli | 1 |
| 78 | 531 00 85-58 | Switch engine cut-off | Switch arrêt moteur | 1 |
| 121 | 732 26 16-01 | Axle of travelling wheel | Axe roue de transport | 1 |
| 122 | 519 65 34-58 | Blocking nut M6 Z | Écrou frein M6 Z | 7 |
| 123 | 519 65 34-56 | Blocking nut M10 Z | Écrou frein M10 Z | 2 |
| 124 | 519 65 34-32 | Nut H M10 Z | Écrou H M10 Z | 2 |
| 140 | 531 00 83-90 | Nut HM6 Z, notched shoulder | Écrou H M6 Z embase crantée | 2 |
| 141 | 519 65 34-62 | Washer 6,3x19x2,5 Z | Rondelle 6,3x19x2,5 Z | 10 |
| 142 | 531 00 84-65 | Starlock washer 10 | Rondelle Starlock 10 | 2 |
| 143 | 531 00 85-39 | "6" shaped washer, 22mm diam. | Rondelle 6 forme Ø22 | 2 |
| 144 | 734 11 72-01 | Washer 3x10x1 Z | Rondelle 3x10x1 Z | 2 |
| 145 | 531 00 84-66 | Washer 10x22x2 Z | Rondelle 10x22x2 Z | 2 |
| 146 | 519 00 28-60 | Washer 10x27x2 Z | Rondelle 10x27x2 Z | 2 |
| 160 | 531 00 84-67 | Starlock washer 8 | Rondelle Starlock 8 | 2 |
| 161 | 531 00 84-68 | Clip pin Bêta 5 Z | Goupille Bêta 5 Z | 2 |
| 162 | 531 00 83-95 | Clip pin, Ø8 x 28 | Goupille clips Ø8 x 28 | 2 |
| 163 | 519 65 34-25 | Key (Shaft Ø15) | Clavette arbre Ø15 | 2 |
| 164 | 519 65 34-26 | Spire nuts 4,2 | Clips 4,2 | 4 |
| 165 | 519 65 12-20 | Cover bolt 4,2 | Vis Tôle 4,2 | 2 |
| 180 | 519 65 31-03 | Clip pin Bêta 2 Z | Goupille Bêta 2 Z | 2 |
| 181 | 531 00 85-40 | Label: "engine cut-off " | Étiq. "Arrêt moteur" | 1 |
| 183 | 519 65 30-85 | Safety label | Étiq. "Sécurité" | 1 |
| 184 | 531 00 94-08 | Label: clutch lever | Étiquette embrayage | 1 |
| 200 | 519 65 34-35 | Label: husqvarna T25 | Étiq.: husqvarna T25 | 1 |
| 202 | 519 65 34-35 | Screw H M6x16 Z, notched shoulder | Vis H M6x16 Z embase crantée | 2 |
| 203 | 519 65 31-13 | Screw H M6x60 Z | Vis H M6x60 Z | 1 |
| 204 | 531 00 84-70 | Screw Η M10x45 Z | Vis H M10x45 Z | 1 |
| 205 | 531 00 84-71 | Screw H M6x20 Z, notched shoulder | Vis H M6x20 Z embase crantée | 2 |
| 208 | 519 65 30-10 | Screw CHc M6x50 | Vis CHc M6x50 | 2 |
| 209 | 531 00 84-73 | Screw M8x40 forged head bolt | Vis M8x40 tête emboutie | 1 |
| 210 | 519 65 30-20 | Screw St Hc M8x16 N | Vis St Hc M8x16 N | 1 |
