Offroam MagSafe-Compatible Charging Phone Holder

Model: 990-1001

Features: 15W Fast Charging, 16N Strong Hold, MagSafe-compatible

Warnings

Self-installation instructions and advice are provided for your convenience. It is your responsibility to determine if you have the knowledge, skills, and physical ability required to properly perform an installation. Offroam shall have no liability for damage or injury resulting from the installation or use of any Offroam or third party products. It is your responsibility to ensure that all products are installed in adherence with local laws and regulations and in such a manner as to allow a vehicle to be operated safely and without distraction. Offroam product warranties do not cover the installation, removal, or re-installation of any product.

Safety

Charging

This device supports Qi2-certified wireless charging for reliable and efficient performance, with up to 15W wireless charging, depending on the capabilities of both the charging device and the power adapter used. The wireless charging power transmission rate is regulated by the receiving device and may be influenced by several factors, including proprietary charging protocols, ambient temperature, electrical current, the battery's charge level, and the age of the device being charged.

Power Specifications

This device operates on [insert frequency] at up to 15W during normal use, with a power supply of 9V/2.22A or a 5V/3A.

Power Input: USB TYPE C

Wireless Charging Output: Up to 15W

Compliance Statements

ISED Compliance Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation. This equipment should be installed and operated with a minimum distance of 10 cm between the radiator and your body.

FCC Compliance Statement

This device complies with Part 15 of the Federal Communications Commission (FCC) Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCC's RF exposure guidelines, the distance must be at least 20 cm between the radiator and your body, and fully supported by the operating and installation configurations of the transmitter and its antenna(s).

CE Compliance Declaration

This device complies with the essential requirements and other relevant provisions of the European Union (EU) directives, including the Radio Equipment Directive (RED) 2014/53/EU, the Electromagnetic Compatibility (EMC) Directive 2014/30/EU, and the Low Voltage Directive (LVD) 2014/35/EU, as applicable. This device has been assessed and meets the required standards for safety, electromagnetic compatibility, and environmental protection in accordance with the applicable EU regulations. It is marked with the CE logo, indicating that it conforms to all relevant European Union legislation.

UKCA Compliance Declaration

This device complies with the essential requirements of the relevant UK legislation, including the Electromagnetic Compatibility (EMC) Regulations 2016, the Radio Equipment Regulations 2017, and the Electrical Equipment (Safety) Regulations 2016, as applicable. This device has been assessed and meets the required standards for safety, electromagnetic compatibility, and environmental protection in accordance with the applicable UK regulations. It is marked with the UKCA logo, indicating that it conforms to the relevant UK legal requirements.

Certifications: CE, FC, UKCA

Disposal and Recycling

Disposal: To reduce the environmental impact of waste, this product should not be disposed of with regular household waste. Please follow local regulations and dispose of the device in an environmentally responsible manner.

Recycling: This product is eligible for recycling. Please take it to an appropriate collection point for the recycling of electrical and electronic equipment. Many countries offer designated recycling programs for electronic waste (e-waste), and proper disposal helps prevent harmful substances from contaminating the environment.

Offroam Contact

Address: OFFROAM, 1577 C St Ste 105 PMB 829905, Anchorage, Alaska 99501-5127 US

Website: https://offroam.com

Models: 990-1001, 990-1001 MagSafe Compatible Charging Phone Holder, MagSafe Compatible Charging Phone Holder, Compatible Charging Phone Holder, Charging Phone Holder

File Info : application/pdf, 2 Pages, 2.20MB

PDF preview unavailable. Download the PDF instead.

GetApplicationAttachment.html?id=8429443

References

Adobe PDF library 17.00 Adobe Illustrator(R) 24.0

Related Documents

Preview OFFROAM Mounting Base Installation Instructions for Subaru Ascent (2019-2022)
Step-by-step guide for installing the OFFROAM Mounting Base on a Subaru Ascent model year 2019-2022. Includes components, warnings, and positioning instructions.
Preview OFFROAM Mounting Base Installation Guide for Toyota Tacoma & 4Runner
Step-by-step installation instructions for the OFFROAM Mounting Base designed for 2024-2025 Toyota Tacoma and 2025 Toyota 4Runner models. Includes components, warnings, and positioning details.
Preview Offroam Mounting Base Installation Instructions for Toyota Tacoma (2012-2015)
Step-by-step guide for installing the Offroam Mounting Base onto the air vents of a 2012-2015 Toyota Tacoma. Includes safety warnings and component details.
Preview Offroam Mounting Base Installation Instructions for Ford Ranger and Everest
Step-by-step guide for installing the Offroam Mounting Base in Ford Ranger (2024-2025 North America, 2022-2025 Global) and Ford Everest (2022-2025) vehicles. Includes component list and positioning information.
Preview Offroam Mounting Base Installation Instructions for Toyota Tundra and Sequoia
Step-by-step guide for installing the Offroam mounting base for Toyota Tundra (2007-2013) and Toyota Sequoia (2008-2022) vehicles. Includes component identification, warnings, and positioning instructions.
Preview Dashboard Mounting Base Installation Instructions for Honda Pilot and Passport
Step-by-step guide for installing the OFFROAM Dashboard Mounting Base in Honda Pilot (2023-2025) and Passport (2026) vehicles. Includes components, warnings, and positioning.