3-in-1 Wireless Charging Station

Product Overview

This document provides instructions and specifications for the 3-in-1 Wireless Charging Station, model YFW-F191, manufactured by Shenzhen Yongfengwang Technology Co., LTD.

This versatile charging solution allows simultaneous charging of multiple devices, including smartphones, smartwatches, and wireless earbuds, along with a Type-C port for additional connectivity.

Product List

The product package includes:

• 3-in-1 Wireless Charging Station
• Type-C Cable
• 30W AC Charger
• Instruction Manual

[Diagram Description: A visual representation shows the main 3-in-1 wireless charging station, a USB Type-C cable, a 30W AC power adapter, and the instruction manual.]

Product Introduction

The charging station is designed to accommodate various devices:

• ① Apple Watch Charging Stand: Dedicated spot for charging Apple Watches.
• ② Mobile Phone Wireless Charger: Primary wireless charging pad for compatible smartphones.
• ③ AirPods Wireless Charger: Designated area for charging AirPods with wireless charging cases.
• ④ Port C Charging: A Type-C port for wired charging or data transfer.

[Diagram Description: An illustration depicts the 3-in-1 charging station with numbered callouts indicating specific charging zones: ① for Apple Watch, ② for Mobile Phone, ③ for AirPods, and ④ a Type-C port.]

Specifications

Name: 3 in 1 Wireless Charging Station

Material: Zinc Alloy

Output (Phone): 5W / 7.5W / 10W / 15W

Output (Watch): 5W

Output (Ear Buds): 5W

Model: YFW-F191

Input: 9V/2A, 9V/3A (MAX)

Power Interface: Type-C

Notes and Safety Information

• This product is designed to work with devices compatible with the specified charging protocol.
• Ensure you use a power supply that does not exceed the specified voltage and current ratings to power this product.
• Avoid placing the product near heat sources or using it in high-temperature and humid environments.
• If the power supply or any components are found to be faulty, do not attempt to dismantle or repair the unit yourself. Please contact the after-sales service for support.
• Keep the product out of the reach of children.
• Please dispose of this product in accordance with local laws and regulations. It should not be disposed of as household waste.

FCC Caution

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure condition without restriction.