Side Self Closing Ball Bearing Drawer Runners 400 mm Full
Model: 5059340838267
Important Information & Getting Started
IMPORTANT: These instructions are for your safety. Please read through them thoroughly prior to handling the product and retain them for future reference.
Before you start:
- The length of the drawer box must be 350 mm.
- Note the minimum needed cabinet depth is 4 mm more than the drawer length.
Safety
- Make sure the cabinet is standing safely. Eventually, you can fix it to the wall.
Parts Included
- 01. x1: Cabinet Member
- 02. x1: Drawer Member
- 03. x14: Screws (Ø 3.5 x 16 mm) ?
Tools You Will Need
- Drill
- Screwdriver ?
- Measuring Tape ?
Assembly Instructions
Step 1: Separate Members
Separate the cabinet member from the drawer member by pushing the release lever. Then fix the drawer members with 3 screws each (Ø 3.5 x 16 mm) ?.
Step 2: Mark Cabinet Interior
On the inside of your cabinet, mark the location for the drawer slide. Mind the gap between drawer fronts. Mark a line in the middle of the space above the gap. The first drilling hole is 37 mm from the front edge.
Step 3: Attach Cabinet Member
Extend the slide member and locate the cabinet member along the mark made in Step 2. Insert screws through the holes along the cabinet member with 4 screws each (Ø 3.5 x 16 mm) ?, following the indicated distances.
Step 4: Attach Drawer Member
Replace the drawer member by sliding it back into the slide member. Take care that the drawer is level while sliding into the cabinet. Make sure that the cabinet members are both at the same height!
Dimension Overview
Key dimensions for installation:
- Drawer Box Length: Must be 350 mm.
- Cabinet Depth: Minimum 4 mm more than drawer length.
- Marking from front edge: 37 mm (first hole).
- Cabinet Member Distances: 37 mm, 64 mm, 128 mm, 224 mm, 288 mm, ≥ 404 mm.
- Slide Member Dimensions: 320 mm, 400 mm (X = 400 mm), 550 mm (max drawer length).
- Other measurements: 45 mm, 22.5 mm, 12.8 mm, 2 mm.
Screws used: Ø 3.5 x 16 mm ?.
Care & Maintenance
Follow standard practices for cleaning and maintenance. Ensure the product is used for its intended purpose.
Guarantee Information
This product has a manufacturer's guarantee of 2 years against manufacturing defects, from the date of purchase (if bought in store) or date of delivery (if bought online), at no additional cost for normal (non-professional or commercial) household use.
To make a claim under this guarantee, you must present your proof of purchase (such as a sales receipt, purchase invoice or other evidence admissible under applicable law). Keep your proof of purchase in a safe place. For this guarantee to apply, the product you purchased must be new; it will not apply to second-hand or display products.
This guarantee covers product failures and malfunctions provided the product was used for the purpose for which it is intended and subject to installation, cleaning, care and maintenance in accordance with the information contained in these terms and conditions, in the user manual and standard practice. This guarantee does not cover defects and damage caused by normal wear and tear or damage that could be the result of improper use, faulty installation or assembly, neglect, accident, misuse, or modification of the product. Unless stated otherwise by applicable law, this guarantee will not cover, in any case, ancillary costs (shipping, movement, costs of uninstalling and reinstalling, labour etc), or direct and indirect damage.
If the product is defective, Kingfisher will, within a reasonable time, replace or refund.
Rights under this guarantee are enforceable in the country in which you purchased this product. Guarantee related queries should be addressed to the store you purchased this product from. The guarantee is in addition to and does not affect your statutory rights.
Manufacturers & Contact
UK Manufacturer
Kingfisher International Products Limited
1 Paddington Square, London, W2 1GG, United Kingdom
EU Manufacturer
Kingfisher International Products B.V.
Rapenburgerstraat 175E, 1011 VM Amsterdam, The Netherlands
Online Resources
To view instruction manuals online, visit: