Specifications and Dimensions
Measurements are provided in millimeters (mm).
FAAC B614 Dimensions
| Parameter | Value |
|---|
| P (Max) | 4000 mm |
| Y (Max) | 3870 mm |
| A (Max) | 3100 mm |
| B | L - A |
| E | 360 mm |
| X (Max) | 4130 mm |
| L | A+B (Max 4300 mm) |
Diagram shows overall dimensions and key measurement points for B614.
B614 Length Configuration Table (A & B)
| Configuration A (mm) | Configuration B (mm) | Configuration A (mm) | Configuration B (mm) |
|---|
| Min | Max | Min | Max | Min | Max | Min | Max |
|---|
| 1100 | 1400 | 1410 | 1800 | 1810 | 2200 | 2210 | 3100 |
| 3A | 4A | 4A | 5A | 5A | 3A | 3A | 3A |
| 1200 | 1500 | 1510 | 2000 | 2010 | 2500 | 2510 | 3100 |
| 3A | 4A | 4A | 5A | 5A | 3A | 3A | 3A |
| 850 | 1320 | 1810 | 2200 | 2210 | 3100 | 2510 | 3100 |
| 2B | 5A | 5A | 3A | 3A | 3A | 3A | 3A |
| 850 | 1000 | 1510 | 2000 | 1760 | 2350 | 2360 | 2600 |
| 1B | 2B | 4A | 5A | 4A | 5A | 5A | 5A |
| 850 | 1100 | 1110 | 1750 | 1510 | 2100 | 1760 | 1850 |
| 1B | 1B | 2B | 3A | 3A | 3A | 3A | 3A |
This table details various combinations of beam lengths A and B for different operational requirements.
FAAC B680H Dimensions
| Parameter | Value |
|---|
| P (Max) | 4000 mm |
| Y (Max) | 3870 mm |
| A (Max) | 3054 mm |
| B | L - A |
| E | 460 mm |
| X (Max) | 4080 mm |
| L | A+B (Max 4300 mm) |
Diagram shows overall dimensions and key measurement points for B680H.
B680H Length Configuration Table (A & B)
| Configuration A (mm) | Configuration B (mm) | Configuration A (mm) | Configuration B (mm) |
|---|
| Min | Max | Min | Max | Min | Max | Min | Max |
|---|
| 1360 | 2100 | 2110 | 3100 | 1610 | 3100 | 1360 | 1850 |
| 5 | 6 | 5 | 6 | 5 | 5 | 2 | 2 |
| 850 | 1600 | 1610 | 3100 | 1860 | 2600 | 1760 | 1850 |
| 4 | 5 | 4 | 5 | 4 | 4 | 3 | 2 |
| 850 | 1850 | 1860 | 2600 | 1610 | 2100 | 1360 | 1850 |
| 3 | 4 | 3 | 4 | 3 | 3 | 2 | 2 |
| 850 | 1600 | 1360 | 1850 | 1610 | 2100 | 1360 | 1850 |
| 2 | 2 | 2 | 2 | 3 | 3 | 2 | 2 |
| 850 | 1350 | 1360 | 1850 | 1610 | 1850 | 1360 | 1850 |
| 1 | 1 | 2 | 2 | 2 | 2 | 2 | 2 |
This table details various combinations of beam lengths A and B for different operational requirements for the B680H model.
Note: All measurements are in mm. All dimensions are expressed in mm.
Assembly Instructions
Follow these steps carefully to assemble the articulated beam kit.
Step 1: Beam Preparation
Diagram 'a' shows the articulated beam, labeled A and B, with overall length indicated.
Visual representation of the articulated beam sections A and B.
Diagram 'b' illustrates part 17 being slid onto beam sections A and B. Red arrows indicate the sliding direction.
[Slide part 17 onto beam sections A and B.]
Diagrams 'c' and 'd' show marking and drilling of mounting holes with a 6.5mm diameter drill bit, showing precise hole placement.
[Mark and drill holes with Ø 6.5 mm diameter.]
Diagram 'e' shows parts 20 and 18 being inserted into beam sections A and B. Red arrows indicate the insertion direction.
[Insert parts 20 and 18 into beam sections A and B.]
Step 2: Attaching Components to Beam
Diagram 'f' shows attaching part 20 to beam A using screws 6 and g. Red arrows indicate the attachment direction.
[Attach part 20 to beam A using screws 6 and g.]
Step 3: Main Housing Assembly
Diagrams 'h', 'i', and 'j' illustrate the assembly of internal components within the main housing. This involves inserting shafts, bearings, and mounting plates (10, 12, 13, 14, 15).
Sequential assembly steps within the main housing: inserting shafts, bearings, and mounting plates (10, 12, 13, 14, 15). Diagram 'h' includes a red 'X' symbol indicating a prohibited action.
Diagram 'k' shows the left (SX) and right (DX) side mounting plates.
Visual representation of the left (SX) and right (DX) side mounting plates.
Step 4: Mounting Plate Preparation
Diagram 'l' shows the use of the hole template (22) to mark drilling points on a surface. Dimensions like 59mm, 16.5mm, 30mm, 70mm, and hole diameter Ø 6.5mm are indicated.
Use the provided hole template (22) to mark drilling points according to specified dimensions and hole sizes.
The text below diagram 'k' reiterates: "Use the hole template provided (22). Use the drilling template provided (22). Use the supplied drilling template (22). Use the supplied drilling template (22). Use the supplied drilling template (22). Use the supplied drilling template (22)."
Instruction to use the provided hole template (22).
Step 5: Component Assembly (M, N)
Diagram 'm' shows the assembly of components: part 3 (a block), part 4 (a U-shaped piece), part 7 (nuts), and part 8 (a bracket).
[Assemble parts 3, 4, 7, and 8.]
Diagram 'n' shows attaching part 8 (a bracket) to the beam.
[Attach part 8 to the beam.]
Step 6: Further Assembly Steps (O, P, Q, R, S)
Diagram 'o' shows inserting part 1 (a pin/bolt) into a bracket.
[Insert part 1 into bracket.]
Diagram 'p' shows attaching part 8 (a bracket) to a component.
[Attach part 8 to bracket.]
Diagram 'q' shows the assembly of a bracket onto the main housing using screws and washers.
[Assemble bracket onto main housing with screws.]
Diagrams 'r' and 's' show attaching parts 9 (a cable guide/clip) and 2 (a spring/cable) to the beam.
[Attach parts 9 and 2 to the beam.]
Step 7: Final Beam Installation
Diagram 't' shows illustration showing the insertion of multiple beam sections into each other.
[Insert beam sections.]
Diagram 'u' shows attaching a cover or housing component to the main structure using screws.
[Attach cover/housing with screws.]
Diagram 'v' shows a part being attached to the end of the beam.
[Attach part to beam end.]
Diagram 'w' shows the final step showing the articulated barrier arm being mounted onto the main housing.
[Mount articulated barrier arm onto main housing.]
