DIESEL 52953/52954 Bluetooth Speaker User Manual
Brand: DIESEL
Models: 52953 (Black Speaker), 52954 (Red Speaker)
Product Type: Bluetooth Speaker
Manual Dimensions: 90mm x 95mm (folded), 180mm x 95mm (unfolded)
Printing: 70g paper, single color, 32 pages, First Edition, Version 01.
Product Overview and Diagram Description
This document provides instructions for the DIESEL 52953 and 52954 Bluetooth speakers. The product is a compact, rectangular speaker with rounded edges, featuring the DIESEL logo. The manual dimensions are 90mm x 95mm when folded and 180mm x 95mm when unfolded.
Key components of the speaker are:
- 1. [Power Button] Power Button
- 2. [Volume Up] Volume Up / Next Track
- 3. [Volume Down] Volume Down / Previous Track
- 4. [Play/Pause] Play/Pause / TWS
- 5. [USB-C Port] USB-C Charging Port
- 6. ? Microphone
- 7. [LED Indicator] LED Indicator
- 8. ? Speaker
The product is FCC Compliant and features a [Recycling Symbol].
Getting Started and Pairing
First Use and Pairing
To turn on the speaker, press and hold the [Power Button] Power Button for 2 seconds. The speaker will enter pairing mode.
To pair with your device:
- Ensure Bluetooth is enabled on your device.
- Select "DIESEL 52953/52954" from the list of available Bluetooth devices.
- Once connected, the speaker will announce "connected".
Features and Operation
Charging
Connect the [USB-C Port] USB-C cable to the charging port (5) and a suitable power source. The [LED Indicator] LED indicator will show the charging status.
Volume and Track Control
- Press the [Volume Up] button (2) or [Volume Down] button (3) to adjust the volume.
- To skip to the next track, press and hold the [Volume Up] button (2) for 2 seconds.
- To go to the previous track, press and hold the [Volume Down] button (3) for 2 seconds.
TWS (True Wireless Stereo) Pairing
To connect two speakers for stereo sound:
- Turn on both speakers.
- On one speaker, double-press the [Play/Pause] button (4).
- The speakers will announce "TWS connected".
- Pair the primary speaker (the one you double-pressed the button on) to your device via Bluetooth.
Mode Selection
The speaker defaults to Bluetooth mode upon startup. Press the [Power Button] Power Button (1) to switch between Bluetooth and TWS modes.
Automatic Power-Off
For battery conservation, the speaker will automatically turn off after 15 minutes of inactivity.
Technical Specifications
- ? Bluetooth Version: 5.0
- Range: Up to 10 meters (33 feet)
- Battery: 3.7V, 1200mAh
- Charging Time: 2-3 hours
- Playback Time: Up to 10 hours
Regulatory Information
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement: The device has been evaluated to meet general RF exposure requirement.
Important Safety Instructions
Read all instructions before using the product.
- Keep these instructions for future reference.
- Heed all warnings on the product and in the instruction manual.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Only use attachments and accessories specified by the manufacturer.
- Protect the power cord from being walked on or pinched.
- Unplug this apparatus during lightning storms or when unused for long periods.
- Do not open the unit. Service should only be performed by qualified personnel.
- Do not expose to excessive heat.
- Do not use while driving.
- This product is not a toy. Keep out of reach of children.