Manuals+

Edaiser Swivel Series User Manual

for iPad 12.9-inch / 11-inch / 10.9-inch/ 10.5-inch/10.2-inch and 8.3-inch

Compatible Information

Verify your iPad is fully matched before installation.

Compatible for iPad Mini 8.3-inch

iPad Mini 8.3 inch 6th Generation 2021 (A2567, A2568, A2569)

Compatible for iPad 10.2-inch/10.5-inch:

Compatible for iPad 10.9-inch

iPad 10th generation 2022 10.9-inch (A2696, A2777, A2757)

Compatible for iPad Air 10.9-inch

Compatible for iPad Pro 11-inch

Only Compatible with below iPad Pro 12.9-inch models:

Note: If compatibility information is updated without prior notice, You may refer to selling link or contact our seller on Amazon to confirm the latest compatible information.

Specification & Accessory Included

Find your iPad model number:

  1. Go to iPad >> Settings >> General >> About. Tap on the model number and the model of AXXXX will be appeared.
  2. Find your iPad model number on the back of your iPad.

Specifications:

Accessory Include

Installation

Put iPad into the Case

To install your iPad from the bottom to the top of the case and fasten it.

Lock the Secure Buckles

The left and right locks are designed to double protect your iPad, in case your iPad accidentally falls.

Note: The buckle is made of plastic, please turn it gently. If there is no buckle design on the side of the keyboard case, please kindly refer to the final version on your hands.

Pencil Holder (for iPad 10.2"/10.5"/10.9"/11")

Available for Apple Pencil 2nd Gen charging when the pencil is ONLY attached to your iPad.

Pencil Holder (for iPad 12.9")

Available for Apple Pencil 2nd Gen charging when the pencil is ONLY attached to your iPad.

Note:

Power Sources

Power Supply

The keyboard case is charged by TYPE-C.

Power Switch (for iPad 12.9")

Push the power button to turn On/Off your device. The LED will be flashed by 3 times once turn it on or off.

Power Switch (for iPad 8.3"/10.2"/10.5"/10.9"/11")

Holding the POWER button on the keyboard to turn On / Off your device. The LED will be flashed by 3 times once turn it on or off. (Press any keys to wake it up during standby mode)

Note: Keep at normal temperature and charge at normal voltage. If you don't use it for a long time, you need to charge your keyboard in time (once of two months).

LED Indicator (for iPad 12.9")

LED Indicator (for iPad 10.2"/10.5"/10.9"/11")

LED Indicator (for iPad 8.3")

Bluetooth Connection

Notice Before Connecting:

Steps for Connection (for iPad 10.2"/10.5"/10.9"/11")

  1. Holding press the power button to turn on the iPad keyboard. (The RGB backlight will turn on and then turn off automatically after a second.)
  2. Then holding press the connection button; the blue wireless indicator will flash, showing the keyboard is waiting for pairing mode.
  3. Turn on your iPad >> Setting >> Bluetooth, and search for "ipad-keyboard" on the list, then tap it for connection.

Steps for Connection (for iPad 8.3"/12.9")

  1. For iPad 12.9": Push the power button to turn on the iPad keyboard.
  2. For iPad 8.3": Holding press the power button to turn on the iPad keyboard. (The RGB backlight will turn on and then turn off automatically after a second.)
  3. Then press combination keys "Fn" and "C" together; the blue wireless indicator will flash, showing the keyboard is waiting for pairing mode.
  4. Turn on your iPad >> Setting >> Bluetooth, and search for "ipad-keyboard" on the list, then tap it for connection.

Note:

Keyboard Function (for iPad 12.9")

for iPad 12.9-inch Keyboard Layout

A Full Row of Hotkeys and Media Keys

Function key: Press the FN + function key.

Note: To type the character in the grey area below, hold Shift and press the desired character.

Note: Long Hold-app specific shortcuts show up (e.g., when you are in an App, hold this key and you will see all the shortcuts that can be used in this App).

RGB Backlight Keys:

  1. Seven modes backlight: Press Fn + [option key] to switch 7 different backlight modes or turn off the RGB backlight.
  2. Three modes breathing backlight: Press Fn + Q to turn off/on the breathing backlight. Press Fn + W to control the speed of the breathing light fast or slow.
  3. Three modes brightness backlight: Press Fn + [brightness key] to adjust the brightness of the backlight.

Note: For power saving, if you don't touch the keyboard for 5 seconds, the backlight will go off automatically; it will light up again when you press any key.

Keyboard Function (for iPad 10.2"/10.5"/10.9"/11")

for iPad 10.2-inch/10.5-inch/10.9-inch/11-inch Keyboard Layout

A Full Row of Hotkeys and Media Keys

Function key: Press the FN + function key.

Note: To type the character in the grey area below, hold Shift and press the desired character.

Note: Long Hold-app specific shortcuts show up (e.g., when you are in an App, hold this key and you will see all the shortcuts that can be used in this App).

RGB Backlight Keys:

  1. Seven modes backlight: Press Fn + [option key] to switch 7 different backlight modes or turn off the RGB backlight.
  2. Three modes breathing backlight: Press Fn + Q to turn off/on the breathing backlight. Press Fn + W to control the speed of the breathing light fast or slow.
  3. Three modes brightness backlight: Press Fn + [brightness key] to adjust the brightness of the backlight.

Note: For power saving, if you don't touch the keyboard for 5 seconds, the backlight will go off automatically; it will light up again when you press any key.

Keyboard Function (for iPad 8.3")

for iPad 8.3-inch Keyboard Layout

A Full Row of Hotkeys and Media Keys

Function key: Press the FN + function key.

Note: To type the character in the grey area below, hold Shift and press the desired character.

Note: Long Hold-app specific shortcuts show up (e.g., when you are in an App, hold this key and you will see all the shortcuts that can be used in this App).

Function Key Combinations:

Note: Switch language input method (Note: Wubi input method is not supported). Any letter can be typed with some special characters.

RGB Backlight Keys:

Note: For power saving, if you don't touch the keyboard for 5 seconds, the backlight will go off automatically; it will light up again when you press any key.

Trackpad Gesture Description

One Finger

Double Fingers

Three Fingers

Be sure that touchpad can be used on your iPad as below steps:

  1. You need to complete below settings: Settings >> Accessibility >> Touch >> AssistiveTouch >> Assistive Touch On.
  2. Make sure your iPad Software Version is up to 14.6 or above version.
  3. Choose right "Keyboard" on your iPad: General >> Keyboard >> Keyboards >> English(US)/QWERTY.

Note: The second setting only can be set after the keyboard connects to your iPad successfully.

Trouble Shooting

How to confirm the keyboard need to be charged?

  1. When the low battery indicator (red sign) blinks, please use the included TYPE-C cable with your iPad charger to recharge it. The red indicator stays on during recharging. After the charging completed, the green indicator would light up.
  2. If you do not use the keyboard for a long time, please recharge your keyboard in time (once of two months).

How to detect the battery level of the keyboard or ensure that the battery level has been successfully charged?

  1. If the LED charging indicator lights up in red for a long time, it means that is charging.
  2. After the keyboard is successfully connected to the iPad, swipe right on the iPad home screen. The keyboard battery life is subjected to the Bluetooth icon.

How to do if the keyboard can't connect to your iPad?

How to press symbol buttons?

After Bluetooth connected well, just press combination Keys: "Shift" and "any symbol". For example, "Shift" and "@" then you will get "@" on your iPad.

How to change between lowercase and uppercase on the keyboard?

  1. The caps lock default function is switch languages. So to type capital letters on the keyboard, please turn off the cap lock default function first.
  2. Go to your iPad settings >> Keyboards setting >> Hardware keyboard >> turn off the toggle of "switch languages using caps lock", then you can change between lowercase and uppercase by pressing the caps lock key.

How to do if the space bar doesn't work?

  1. You can try below settings firstly: Settings >> Accessibility >> Keyboards >> Full Keyboard Access >> Commands.
  2. Then change settings for "Space" from "activate" to "Clear". If it comes back, then you can also turn off full keyboard access.
  3. Once it is cleared, the space bar would work fine.

How to do if some keys don't work?

Some of the keys do not work, please try to reset the keyboard by pressing and holding the combination key "L+S+Z" for 3s, you'll see the indicator flash once. It shows the keyboard has been reset. After resetting the keyboard, please pair the keyboard with your iPad again.

If there is delay after you press keys, please kindly check one of iPad Settings as below:

If there is repeated characters after you press certain key, please kindly check one of iPad Settings as below:

Be sure that touchpad can be used on your iPad as below steps:

  1. You need to complete below settings: Settings >> Accessibility >> Touch >> AssistiveTouch >> Assistive Touch On.
  2. Make sure your iPad Software Version is up to 14.6 or above version.
  3. Choose right "Keyboard" on your iPad: General >> Keyboard >> Keyboards >> English(US)/QWERTY.

Note: The second setting only can be set after keyboard connects to you iPad successfully.

How to updating your iPadOS to 14.6?

To upgrade your iPadOS to the latest version:

  1. Open your device's Settings >> General >> Software Update.
  2. Tap Download and Install.

If you see Resume Download, tap that instead.

If you have unwanted auto-correction or punctuation, please follow these steps:

  1. Open Settings app >> General >> Keyboard >> Hardware Keyboard.
  2. Toggle OFF Auto-Capitalization, Auto-Correction, and "." shortcut.

360-Degree Rotating

The keyboard case is 360° Rotatable and can do a 180° Flip.

Warranty & Technical Support

Thanks for purchasing the 360-degree swivel keyboard case with trackpad series. Each unit was manufactured under strict quality control. Each product is covered by a one-year warranty. If you have any questions about the product, please contact our brand support at support@edaiser.com. You are most welcome to contact us for the latest user manual. Thanks for your support always!

Models: B09Y9CTKV1, B09Y9CTKV1 Swivel iPad Case Keyboard, Swivel iPad Case Keyboard, iPad Case Keyboard, Case Keyboard, Keyboard, 09Z81QB9Z, B0BLZKHYL7, B09CGSW24X, B0BZJ111YT, B09GBCR8ZS, B0B5V5MXX2

PDF preview unavailable. Download the PDF instead.

C1Zawzg4j5L Adobe PDF library 16.03 Adobe Illustrator 26.0 (Windows)