Patents & Intellectual Property
Instruction Manual for flox models including: FLX-018-AS01 Flo X Split Clamp, FLX-018-AS01, Flo X Split Clamp, Split Clamp, Clamp
CBS Flo X Monitor Arm from Posturite
Flo X - Braccio porta monitor triplo formato grande | Herman Miller Gaming
File Info : application/pdf, 1 Pages, 707.20KB
DocumentDocumentCONFIGURE CLAMP BRACKET 1 TIGHTEN CLAMP SCREW Use Allen Key provided with clamp 4 ALTERNATIVE INSTALLATION METHODS FOR RESTRICTED GAP AT REAR OF WORK SURFACE FOLD FLO X SPLIT CLAMP FLX/018/AS01 PARTS INCLUDED Clamp Cover Bush Allen key Clamp pad Upper Clamp Caphead screws Lower Clamp Clamp Screw If required change the clamp plate setting by removing the screws and adjusting to correct setting Desk Thickness Range Setting 1: 9mm - 25mm (3/8" - 1") Setting 2: 20mm - 45mm (3/4" - 1 3/4") INSTALL CLAMP SCREW AND CLAMP 2 PAD IMPORTANT NOTE Ensure screw is tightened CONFIGURE 180° STOP (if required) 5 A 180° STOP ENGAGED B 360° ROTATION 180 A B FIT CLAMP TO DESK FIT CLAMP COVER AND BUSH 6 3 WARNING · Do not use this product for any purpose other than that for which it was designed · Ensure desk/worksurface is suitable to take the weight of the arm/s and monitors · Supported weight must not exceed the maxium load per arm · Take care when installing as fingers could become trapped MAINTENANCE AND INSPECTION · Ensure all screws are tightened and occasionally adjust if needed · Ensure arm is pushed fully down onto the clamp before installing the monitor(s) · Clean with a damp cloth, NO solvents DISCLAIMERS · The use of power tools, lever bars or excessive force during the installation, or re-configuration of the product will invalidate your guarantee · Failure to observe the recommendations in the use, and configuration of these products may affect your guarantee · As a part of Colebrook Bosson Saunders ongoing product improvement programme the design of products may change without prior notice and details may vary from those illustrated PATENTS Colebrook Bosson Saunders hold a number of patents and other intellectual property rights covering our products and processes. You can find patent information on our website at: www.colebrookbossonsaunders.com/patents Please consider leaving these instructions with the product if further installation may be required by others FLX-018-AS01-INST-A-SEPT-2022 FOLD FOLD FOLD Print size - A4 297mm x 210mm