Step2 Fun with Friends Kitchen

Product Information

Model Numbers: 4883, 4884, 4885, 4236

Manufacturer: The Step2 Company, LLC.

Address: 10010 Aurora-Hudson Rd. Streetsboro, OH 44241 USA

Contact: 1-800-347-8372 (USA & Canada Only), (330)656-0440

Website: www.step2.com

General Use and Safety Warnings

This product is intended for use by children aged 2 years and up.

WARNING: CHOKING HAZARD - Small parts. Sharp points. Adult assembly required.

Safety Information:

• Provide continuous adult supervision at all times.
• Instruct children not to use the product until properly assembled.
• DO NOT remove any screws once installed. For disassembly, only remove parts not secured by screws.
• DO NOT over-tighten screws, as they may not hold parts together appropriately.
• Note that screws are designed to pierce the plastic and form their own threads.

Cleaning Instructions:

• Electronic Components: Do not submerge in water or spray liquid directly on the unit. Wipe with a damp cloth.
• General Cleaning: Use a 50/50 mixture of white vinegar and water. Parents should thoroughly wash accessories with mild soapy water before use.

Disposal Instructions: Please recycle when possible. Disposal must comply with government regulations.

Important Battery Information:

• Do not mix old and new batteries.
• Do not mix different types of batteries.
• Insert batteries with the correct polarity.
• Remove exhausted batteries from the toy.
• Follow battery manufacturer's warnings and recommendations.
• Do not recharge non-rechargeable batteries.
• Rechargeable batteries are to be removed from the toy before recharging.
• Rechargeable batteries are to be charged only under adult supervision.
• The supply terminals are not to be short-circuited.

FCC Compliance: This Class B digital apparatus complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Canadian Compliance: This Class B digital apparatus complies with Canadian ICES-003.

Inspect this product before each use. Tightly secure connections and replace damaged or worn components. Contact The Step2 Company for replacement parts.

Parts Identification

Refer to the diagrams for part identification. Key components include:

• A: Main Kitchen Structure
• B: Countertop/Sink Area
• C: Base Unit with Oven and Shelves
• D: Refrigerator Unit
• E: Faucet Assembly
• F: Faucet Handle
• G: Oven Door
• H: Sink Basin
• I: Stove Top
• J1, J2, J3: Accessories (e.g., pots, cups)
• L: Bottle Rack
• M: Food Accessories (e.g., hot dog, burger)
• K: Bottles (e.g., ketchup, mustard)

Required (Not Included):

• 2 x 3/4" (1.91 cm) screws
• 2 x 1-1/2" (38.10 mm) screws
• 2 x "AA" batteries

Assembly Instructions

Follow the numbered steps in the provided diagrams. Key assembly actions include:

1. Attach part A to the base unit.
2. Insert and secure part H into the designated slot.
3. Connect part I to the countertop.
4. Attach part G (oven door).
5. Snap components M and other accessories into place. Ensure a clicking sound for proper fit.
6. Connect the main sections of the kitchen (B and C) using screws.
7. Assemble the refrigerator unit (D) and attach it.
8. Connect the faucet assembly (E) and handle (F).
9. Attach the countertop and sink area (B) to the main structure.
10. Secure various parts using the provided screws (e.g., x2 1-1/2" screws for connecting sections).
11. Ensure all connections are tight.
12. Install batteries as indicated in the battery compartment (use "AA" 1.5V batteries).
13. Attach accessories like the faucet and stove top.
14. Place accessories like pots, cups, and food items into their designated spots.

Decal Application: Clean and dry the area thoroughly. Center the decal and apply pressure from the center outwards.

Product Care and Maintenance

Regularly inspect the product for any damage or wear. Tighten any loose connections. Replace any worn or damaged parts by contacting The Step2 Company.