1. Specifications
Detailed specifications for the MATREXX 55 computer case:
| Category | Details |
|---|---|
| Product Dimensions (LxWxH) | 440mm x 210mm x 480mm |
| Case Type | Middle Tower |
| Materials | ABS+SPCC (Panel thickness: 0.6mm) |
| I/O Panel | USB3.0×1 / USB2.0×2 / Audio (HD)×1 / Mic×1 |
| Feature | Details |
|---|---|
| Expansion Slots | 7 |
| 2.5" Drive Bays | 2+2 |
| 3.5" Drive Bays | 2 |
| Clearance | Dimension |
|---|---|
| Graphic Card | 370mm |
| CPU Cooler | 168mm |
| Cable Management | 23mm |
| PSU Length | 170mm |
Cooling Support:
Fans:
- Front: Supports 120mm fans x 3
- Top: Supports 120mm fans x 2 / 140mm fans x 2
- Rear: Supports 120mm fan x 1
Liquid Coolers:
- Front: Supports 120/240/360mm radiators
- Top: Supports 120/140/240/280mm radiators
- Rear: Supports 120mm radiators
2. Hardware Supports
This section details the hardware compatibility of the MATREXX 55 case:
- Motherboard Form Factors: ATX, Micro ATX, Mini ITX are supported.
- VGA Compatibility: Maximum graphics card length supported is ≤ 370mm.
- PSU Length: Maximum power supply unit length supported is ≤ 170mm.
- Storage Drives: The case supports up to two 2.5" SSDs and two 3.5" HDDs. It also features an "HDD LOCK" mechanism for secure drive mounting.
3. Cooling System Supports
Details on fan and radiator mounting options:
- Top: Supports two 120mm or 140mm fans, or 120/140/240/280mm radiators.
- Rear: Supports one 120mm fan or a 120mm radiator.
- Front: Supports three 120mm fans or 120/240/360mm radiators.
4. RGB Light Control Switch
The MATREXX 55 features an RGB light control switch. By default, it operates in manual control mode.
To enable motherboard (M/B) AURA control, disconnect the cable labeled "MAIN" and connect it to the corresponding header on your motherboard.
5. RGB_HEADER (AURA +12V,G,R,B) Connection
This section explains the correct connection of RGB lighting components to the motherboard.
- RGB_HEADER1/2/...: This connection is for the motherboard's standard RGB header, typically supporting +12V, Green, Red, and Blue pins. (Indicated by a checkmark: ✔️)
- ADD_HEADER: This connection is NOT compatible with ADD_HEADER type headers. (Indicated by a cross: ❌)
Important Note: This cable is designed exclusively for RGB_HEADER (+12V,G,R,B) on motherboards, such as those from ASUS. It is not intended for ADD_HEADER connections.
When connecting to the RGB_HEADER, ensure the arrow indicator on the cable aligns correctly. The arrow side must be positioned opposite to the 12V pin on the motherboard header for proper orientation. ➡️
6. Cable Connection & I/O Control
The front I/O panel provides convenient access to essential controls and ports:
- Power: Button for system power.
- LED Control: Button for managing RGB lighting effects.
- Reset: Button to restart the system.
- AUD/MIC: Jacks for audio input/output and microphone.
- USB: Universal Serial Bus ports for peripheral connectivity.
The RGB Controller requires a connection to a Power Molex connector for operation.
