Soldering Iron Tip Care
by ProvideYourOwn on July 2, 2012
Intro: Soldering Iron Tip Care
The Problem:
When I was younger, the tip of my soldering iron was always pitted and eaten away. It is difficult to solder with a damaged tip. I have since learned some techniques from pros that will help you keep your soldering iron tip in mint condition.
Explanation:
Tips corrode because of oxidation. This is the same process that causes rust to form on things made from iron or steel. Oxidation is greatly accelerated with higher temperatures, especially soldering temperatures.
The Solution:
Here are two tips to prevent excessive corrosion and maximize the life of your soldering iron tip.
First Tip
Keep your heat low. You can do this by:
- Turning off your soldering iron when not in active use.
- Use a temperature controlled solder station to keep the temperature low and constant.
Second Tip
Keep oxygen away from the tip. You can do this by keeping fresh solder on the tip when not in use. The photos show (in order):
- Tip with old solder and poor coverage
- Freshly cleaned tip - ready for use
- Newly applied solder - tip is not ready for standby
Summary
- Keep your heat low; turn off when not being actively used.
- After each actual use, coat the tip with fresh solder before putting back into its holder.
Just in case you are new to soldering and don't know, be sure to wipe the tip clean on a wetted sponge before soldering. Excess solder on the tip will do no good and lead to problems when trying to solder.
Image 1: Old solder on tip - ripe for corrosion.
Image 2: Clean tip - ready for use.
Image 3: Freshly tinned - ready for storage.
Related Instructables
- Soldering tips and tricks by Mr. M
- How to Solder Basic Soldering Guide by soldering iron
- DIY soldering iron mounted solder dispenser by tgferreira184
- Soldering to large metal objects by T3h_Muffinator
- How To: Soldering by randofo
- Soldering Tips (Photos) by ddemayo
For more information, visit: Instructables.com - Soldering Iron Tip Care
