Instructions for Scolmore models including: CT300 Clickflow Blue 3 In 1 Out Connector Hub, CT300, Clickflow Blue 3 In 1 Out Connector Hub, 3 In 1 Out Connector Hub, Connector Hub
File Info : application/pdf, 1 Pages, 94.12KB
DocumentDocumentTechnical, Safety & Installation Information Product Ref: CT300 250V~ 20A 4 Pin (1 in 3 Out) Connector Please read the following information carefully before commencing installation. Before commencing any electrical work, ensure the mains isolator on the consumer unit / fuse board is in the `OFF' position, to prevent the possibility of electric shock. This product should be installed by a qualified electrician, and wired in accordance with the IEE Wiring Regulations. This product is designed for use in fixed wiring installations only. This product is only suitable for installation in NON-READILY accessible areas. Installation couplers are intended for connection and disconnection without load only. SUPPLY: LIVE EARTH NEUTRAL AUX · Durable Thermoplastic. · Tested and compliant with BS5733, BS8488 and IEC61535. · Tested and compliant with BS7671:2008, Table 4A2 reference method E. · One input to three outputs. · Will accept 3 pin or 4 pin FLOW connectors. · Easy lock and release mechanism. · Can be used in conjunction all other Click Flow hub junction boxes. WARNING Any dangerous compatibility between different manufacturer installation coupler systems is not automatically prevented by compliance with IEC 61535. This system is NOT a replacement for a domestic plug and socket outlet-system. Do not remove cover. For cleaning / polishing of products, use only a soft, dry, clean cloth. IF IN DOUBT CONSULT A QUALIFIED ELECTRICIAN. V.3 Retain thesSecoinlmsotrreuHcotiuosne,sMfaorirnefru, LtuicrhefierldeRfeoraednIncde. E.state, Tamworth, Staffordshire, B79 7UL Telephone: 01827 63454 E-mail: technical@scolmore.com Facsimile: 01827 63362 Website: www.scolmore.com