Product Data Sheet: PCIe 4.0 x16 Riser Cable

Description

PCI Express 4.0 offers maximum transfer speeds for recent GPUs such as Nvidia RTX 30 and AMD RX 6000 series. Many PC cases offer vertical mounts for the GPU which requires the physical extension of the GPU from the motherboard. Thermal Grizzly offers the perfect solution for this requirement with the PCIe 4.0 x16 30cm riser cable.

Properties

Following the PCIe 4.0 x16 specifications, the individual wires are shielded and combined to 5 wire pairs. Two grounded mounting holes allow to fix the socket to your case or wherever it's required. You can find the detailed measures in the technical drawing attached.

Storage

Store in original packaging in a dry environment at room temperature.

Specifications

Image Description: A visual representation of the Thermal Grizzly PCIe 4.0 x16 Riser Cable, showing its flexible cable design and the PCIe connectors at each end.

Technical Drawing and Pin-Out

Technical Drawing Description: The technical drawing illustrates the physical dimensions and components of the PCIe 4.0 x16 Riser Cable. Key elements identified by callouts include:

• 1: FFC Cable, 30 AWG (Signal), 32 AWG (GND)
• 2: PCIe x16 Card Edge PCB
• 3: PCIe x16 164 Pin SMT Type Connector
• 4: PCIe x16 Receptacle PCB with dimensions 125.5 x 20.32 mm
• 5: Molding with dimensions 8.00 x 89.89 mm, Thickness (T) 5mm

The diagram also shows overall dimensions of 300mm for the cable length and specific measurements for connector placement and cable width.

PCI-Express 4.0 x16 Pin-Out