Wisenet WAVE | Download
User Guide for Hanwha Techwin models including: WRT-P-3101MW-1TB WAVE Recording Server
Samsung WRT-P-3101MW-1TB WAVE Recording Server NVR, 1TB | 123 Security Products
Samsung WRR-P-E200W3-24TB Wisenet WAVE Optimized 1U Rack Server, 24TB | 123 Security Products
Samsung WRR-P-E200S3-36TB WAVE Recording Server, 36TB | 123 Security Products
File Info : application/pdf, 2 Pages, 1.55MB
DocumentDocumentDo Not Discard Product Key on Back Hardware Quick Reference Guide Thank you for selecting Wisenet WAVE Video Management System! For assistance or questions regarding the setup of your WAVE server or client, please contact one of our technical support specialists, or visit our website. Technical Support: 877-213-1222 Web: www.hanwhasecurity.com WAVE VIDEO TUTORIAL LIBRARY AND MOBILE APPLICATION Use the QR codes below to visit our extensive video tutorial library and to install your WAVE Mobile app to always stay connected. Setting up WAVE software https://wavevms.com/wave_qg_1 Adding devices to WAVE https://wavevms.com/wave_qg_2 WAVE software may be downloaded by following this QR code or by visiting the link below: https://wavevms.com/download/ Download the WAVE Mobile App for Android Setting camera recording profiles https://wavevms.com/wave_qg_3 Playlist for WAVE tutorial videos https://wavevms.com/wave_qg_4 Download the WAVE Mobile App for iOS Technical Support (877) 213-1222 www.HanwhaSecurity.com CONFIGURING SYSTEM NETWORK SETTINGS In certain cases, it may be necessary for your WAVE server to use a static IP address. Follow the steps outlined below to configure your WAVE server to use a static network IP address. Windows 1. Click the icon to enter the Start menu 7. Double-click on the Internet Protocol Version 4 (TCP/IPv4) 2. Click to access your system Control Panel 3. Click the "Networking & Internet" icon 4. Click "Change Adapter Options" 5. Double-click the icon for the network card used to connect to your local network to view its properties window 6. Click on "Properties" 8. Set network properties according to your requirements Ubuntu 1. Click the 2. Click the icon to enter the System Settings window icon to enter the Network Settings window 4. Go to the "IPv4 Settings" tab and input the IP configuration required for your network 3. Select "Wired" and click "Options..." © 2019 Hanwha Techwin Co., Ltd. All rights reserved. DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE Under no circumstances, this document shall be reproduced, distributed or changed, partially or wholly, without formal authorization of Hanwha Techwin Co., Ltd. REVISED 10-2019 Technical Support (877) 213-1222 LICENSE KEY / SERIAL NUMBER www.HanwhaSecurity.com