B'TWIN VELOCARGO R500E Electric Cargo Bike Quick Start Guide
Introduction
This guide provides essential information for the B'TWIN VELOCARGO R500E electric cargo bike, covering its display, control modes, battery, and recommended usage practices.
Display and Controls
The central display unit provides key information about your ride and the bike's status. It includes:
- Speed: Displays current speed (KM/H) [Speedometer icon].
- Battery Capacity: Shows the remaining battery charge percentage [Battery icon].
- TRIP: Displays the distance covered since the last reset [Odometer icon].
- ODO: Shows the total distance traveled by the bike [Odometer icon].
- TRIP TO GO: Indicates the estimated remaining range in kilometers based on the current assistance mode [Range indicator icon].
The control panel features several buttons:
- ON/OFF: Press for 2 seconds to turn the bike on or off [Power button icon].
- Lights + Settings: Press for 2 seconds to control lights and access settings [Light bulb icon] + [Gear icon].
- +/- Buttons: Used to adjust the assistance level or navigate through information screens [Plus icon] / [Minus icon].
Assistance Modes
The B'TWIN VELOCARGO R500E offers various assistance modes to suit your needs:
- Pedestrian Mode (6 km/h): Provides a low-speed assist for walking alongside the bike. Activated by pressing for 2 seconds.
- Mode 0: No assistance.
- Mode 1: +90% assistance.
- Mode 2: +180% assistance.
- Mode 3: +300% assistance.
The active assistance mode is indicated on the display.
Good Practices
Following these recommendations will help maintain optimal performance and battery life:
- Tire Pressure: For optimal performance and handling, ensure tires are inflated to between 3.5 and 5 bar.
- Loading: Autonomy (range) will be reduced if the bike is loaded with cargo.
- Uphill Riding: Autonomy will be reduced when riding uphill.
- Low Battery: When the battery charge is low, it is advisable to reduce the assistance mode.
- Battery Charging: The battery must be fully charged at least once every 3 months.
- Cold Weather: Autonomy will be reduced in cold weather (below 5°C).
Before First Use
Before using the bike for the first time, activate the battery by connecting the charger to a power outlet. The charging time is approximately 4 hours and 40 minutes.
Resetting the TRIP Meter
To reset the TRIP meter (partial distance) to zero, press and hold the relevant button for 5 to 10 seconds.