User Manual for LEDLyskilder models including: V2 Dual Color LED Controller, V2, Dual Color LED Controller, LED Controller
LEDlife rWave CCT controller - 12V (60W), 24V (120W) - LEDLyskilder.no
LEDlife rWave CCT controller - 12V (60W), 24V (120W)
LEDlife rWave CCT controller - 12V (60W), 24V (120W) - LEDMegaStore.se
File Info : application/pdf, 2 Pages, 1.85MB
DocumentDocumentDual Color LED Controller Model No.: V2 2 Channel/Step-less dimming/Wireless remote control/Auto-transmitting/Synchronize Feature LVD RED 4096 levels 0-100% dimming smoothly without any flash. Match with RF 2.4G single zone or multiple zone dual color or single color remote control. One RF controller accept up to 10 remote control. Auto-transmitting function: Controller automatically transmit signal to another controller with 30m control distance. Synchronize on multiple number of controllers. Fade in and out effect selectable. 3 levels color temperature (WW, NW and CW) selectable by continuous power off and on operation. Technical Parameters Input and Output Input voltage Input current Output voltage Output current Output power Output type Environment Operation temperature Case temperature (Max.) IP rating 12-24VDC 10.5A 2x(12-24)VDC 2CH,5A/CH 2x(60-120)W Constant voltage Ta: -30 OC ~ +55 OC T c: +85OC IP20 Warranty and Protection Warranty 5 years Protection Reverse polarity Short circuit Dimming data Input signal Control distance Dimming gray scale Dimming range Dimming curve PWM Frequency Safety and EMC EMC standard (EMC) Safety standard(LVD) Radio Equipment(RED) Certification Weight Net weight Gross weight RF 2.4GHz 30m(Barrier-free space) 4096 (2^12) levels 0 -100% Linear 2KHz (default) ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4 EN 62368-1:2020+A11:2020 ETSI EN 300 328 V2.2.2 CE,EMC,LVD,RED 0.038kg 0.049kg User Manual Ver 1.1.0 Mechanical Structures and Installations LED indicator Power Input Power Input + Installation rack Match key V2 Dual Color LED Controller Cool white LED Output LED + Warm white LED Output LED + Installation rack 33mm 97mm AC100-240V Power Supply 12-24VDC Constant Voltage + + INPUT 12-24VDC OUTPUT WW 18mm V2 CW CW WW Dual color LED strip Note: Continuously switch off and on the power supply two times rapidly, It will change 3 levels color temperature (WW, NW and CW) in sequence. CCT remote Match Remote Control (two match ways) End user can choose the suitable match/delete ways. Two options are offered for selection: Use the controller's Match key Use Power Restart Match: Short press match key, immediately press on/off key (single zone remote) or zone key (multiple zone remote) of the remote. The LED indicator fast flash a few times means match is successful. Delete: Press and hold match key for 5s to delete all match, The LED indicator fast flash a few times means all matched remotes were deleted. Match: Switch off the power of the receiver, then switch on power. Repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful. .DSwelietcteh: off the power of the receiver, then switch on power. Repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted. Page 1 Application notes 1. All the receivers in the same zone. 30m 30m 30m RF remote Auto-transmitting: One receiver can transmit the signals from the remote to another receiver within 30m, as long as there is a receiver within 30m, the remote control distance can be extended. Auto-synchronization: Multiple receivers within 30m distance can work synchronously when they are controlled by the same remote. Receiver placement may offer up to 30m communication distance. Metals and other metal materials will reduce the range. Strong signal sources such as WiFi routers and microwave ovens will affect the range. We recommend for indoor applications that receiver placements should be no further apart than15m. 2. Each receiver(one or more) in a different zone, like zone 1, 2, 3 or 4. Zone 1 Zone 2 30m 30m Zone 3 Zone 4 RF remote Dual color control WW=Warm white LED CW=Cool white LED Each channel can supply up to 120W(@24V) and white balance can be controlled as such: Color temperature Power distribution Cool white WW=0W,CW=120W Neutral white WW=60W,CW=60W Warm white WW=120W,CW=0W Linear dual color tuning Dimming curve Warm white(Min. 2700K) Neutral white(4000K) Cool white(Max. 6500K) Recommended CCT range PPW WMM dduuttyy((%%)) 110000 9900 8800 7700 6600 5500 4400 3300 2200 1100 Gamma=1.0 10 20 30 40 50 60 70 80 90 100 Brightness(%) User Manual Ver 1.1.0 V2 Dual Color LED Controller Fade in and Fade out Setting Long press match key 5s, then short press match key 3 times, The lighting effect will be set to the fade in and fade out in 3s, the indicator light of LED controller blinks 3 times. Long press match key 10s, restore factory default parameter, the light on/off time restores to 0.5s. Malfunctions Analysis & Troubleshooting Malfunctions No light Uneven intensity between front and rear,with voltage drop No response from the remote Causes 1. No power. 2. Wrong connection or insecure. 1. Output cable is too long. 2. Wire diameter is too small. 3. Overload beyond power supply capability. 4. Overload beyond controller capability. 1. The battery has no power. 2. Beyond controllable distance. 3. The controller did not match the remote. Troubleshooting 1. Check the power. 2. Check the connection. 1. Reduce cable or loop supply. 2. Change wider wire. 3. Replace higher power supply. 4. Add power repeater. 1. Replace battery. 2. Reduce remote distance. 3. Re-match the remote. Page 2Corel PDF Engine Version 16.1.0.843 CorelDRAW X6