Huawei eKitEngine S310 Series Switches Datasheet
Product Features and Highlights
Flexible Ethernet Networking
The eKitEngine S310 series switches support traditional Spanning Tree Protocol (STP), Rapid Spanning Tree Protocol (RSTP), and Multiple Spanning Tree Protocol (MSTP), along with the industry-standard Ethernet Ring Protection Switching (ERPS) defined in ITU-T G.8032. ERPS provides millisecond-level protection switching using traditional Ethernet MAC and bridging functions. The switches also feature the Smart Link function for uplink backup, allowing one switch to connect to multiple aggregation switches via multiple links, significantly improving the reliability of access devices.
Diversified Security Control
The S310 series supports multiple security authentication modes, including MAC address authentication and 802.1X authentication, dynamically delivering user policies for VLAN, QoS, and ACL. It offers port-based 802.1X, MAC address, and multi-mode authentication. The switches provide defense mechanisms against DoS attacks (e.g., SYN flood, Land, Smurf, ICMP flood) and user-targeted attacks (e.g., bogus DHCP server, IP/MAC spoofing, DHCP request flood, variable DHCP CHADDR values). DHCP snooping is supported to maintain binding entries and discard invalid packets, with configurable trusted/untrusted ports to ensure users connect only to authorized DHCP servers. Strict ARP entry learning prevents ARP spoofing from exhausting ARP entries, ensuring authorized user Internet access.
Easy Operations and Maintenance
Management and maintenance are supported via SNMPv1, SNMPv2c, SNMPv3, CLI, web system, or SSHv2.0. Features include remote network monitoring (RMON), multiple log hosts, port traffic statistics collection, and network quality analysis to facilitate network optimization. The MUX VLAN function, comprising a principal VLAN and subordinate VLANs (group and separate), allows communication between subordinate VLANs and the principal VLAN, and among ports within a subordinate group VLAN. VLAN-based Spanning Tree (VBST) is also supported.
Intelligent Stack (iStack)
The eKitEngine S310 series supports iStack, allowing multiple stacking-capable switches to be logically stacked into a single virtual switch. Member switches in a stack provide redundancy backup for device reliability and use inter-device link aggregation for link reliability. iStack enhances network scalability by allowing port, bandwidth, and processing capacity increases through adding member switches. It simplifies device configuration and management, as multiple physical switches are virtualized into one logical device, manageable through any stack member switch. Some S310 models feature dedicated stack ports that do not require configuration and free up uplink ports.
PoE Power Supply
PoE models offer Fast PoE, supplying power to Powered Devices (PDs) within seconds of power-on, significantly reducing the power-off time of PDs compared to common switches. Perpetual PoE ensures uninterrupted power supply to downstream PDs even when the PoE switch restarts, for example, during software upgrades.
Smart Upgrade
Leveraging Huawei Online Upgrade Platform (HOUP), the S310 series supports smart upgrades. Switches obtain the version upgrade path from HOUP and download new system software. The upgrade process is highly automated with one-click upgrade support and system software pre-loading, which reduces upgrade time and service interruption. This feature simplifies device upgrades, enabling customers to perform upgrades independently, reducing maintenance costs, and minimizing upgrade failure risks through standardized upgrade paths.
Cloud Management
The Huawei eKit app enables users to configure, monitor, and inspect switches via the cloud, reducing onsite deployment and O&M manpower costs. The eKitEngine S310 series supports both cloud management and on-premise management modes, which can be flexibly switched to ensure smooth evolution and maximize return on investment (ROI).
Product Specifications
Table 1: eKitEngine S310-24T4S, eKitEngine S310-24P4S, eKitEngine S310-24T4X
| Item | eKitEngine S310-24T4S | eKitEngine S310-24P4S | eKitEngine S310-24T4X |
|---|---|---|---|
| Switching capacity | 56 Gbps | 56 Gbps | 128 Gbps |
| Packet forwarding | 42 Mpps | 42 Mpps | 96 Mpps |
| Fixed port | 24 x 10/100/1000BASE-T ports, 4 x GE SFP ports | 24 x 10/100/1000BASE-T ports (PoE+), 4 x GE SFP ports | 24 x 10/100/1000BASE-T ports, 4 x 10GE SFP+ ports |
| Chassis dimensions (H x W x D) | 43.6 mm x 442 mm x 220 mm | ||
| Chassis height | 1 U | ||
| Weight in full configuration (including packaging materials) | 3.44 kg | 3.79 kg | 3.44 kg |
| Power module type | Built-in AC power module | ||
| Rated voltage | 100 V AC to 240 V AC, 50/60 Hz | ||
| Maximum voltage | AC input: 90 V AC to 290 V AC, 45 Hz to 65 Hz | ||
| Maximum power consumption | 34.04 W | Without PoE: 47.1 W | 35.04 W |
| Noise | Sound power at normal temperature: 47 dB(A) Sound power at high temperature: 51 dB(A) Sound pressure at normal temperature: 35 dB(A) |
Sound power at normal temperature: 49.3 dB(A) Sound power at high temperature: 63 dB(A) Sound pressure at normal temperature: 37.3 dB(A) |
Sound power at normal temperature: 47 dB(A) Sound power at high temperature: 51 dB(A) Sound pressure at normal temperature: 35 dB(A) |
| Long-term operating temperature | -5°C to +50°C (0 m to 1800m). When the altitude ranges between 1800 m and 5000 m, the operating temperature reduces by 1°C each time the altitude increases by 220 m. | ||
| Storage temperature | -40°C to +70°C | ||
| Relative humidity | 5% to 95% (non-condensing) | ||
| Heat dissipation mode | Air cooling, intelligent fan speed adjustment | ||
Table 2: eKitEngine S310-24P4X, ekitEngine S310-24ST4X, ekitEngine S310-24PN4X
| Item | eKitEngine S310-24P4X | ekitEngine S310-24ST4X | ekitEngine S310-24PN4X |
|---|---|---|---|
| Switching capacity | 128 Gbps | 128 Gbps | 200 Gbps |
| Packet forwarding | 96 Mpps | 96 Mpps | 144 Mpps |
| Fixed port | 24 x 10/100/1000BASE-T ports (PoE+), 4 x 10GE SFP+ ports | 24 x GE SFP ports, 8 of which are dual-purpose 10/100/1000 or SFP, 4 x 10GE SFP+ ports | 24 x 10/100/1000/2.5GBASE-T ports(PoE+), 4 x 10GE SFP+ ports |
| Chassis dimensions (H x W x D) | 43.6 mm x 442 mm x 220 mm | ||
| Chassis height | 1 U | ||
| Weight in full configuration (including packaging materials) | 3.79 kg | 3.55 kg | 6.89 kg |
| Power module type | Built-in AC power module | ||
| Rated voltage | 100 V to 240 V AC, 50/60 Hz | AC input: 100 V AC to 240 V AC; 50/60 Hz High-voltage DC input: 110 V DC to 250 V DC | |
| Maximum voltage | AC input: 90 V AC to 290 V AC, 45 Hz to 65 Hz | AC input: 90 V AC to 264 V AC; 47 Hz to 63 Hz High-voltage DC input: 88 V DC to 300 V DC | |
| Maximum power consumption | Without PoE: 44.35 W With PoE: 485.91 W (PoE: 400 W) | 41.7 W | Without PoE: 77.70 W Full PoE load: 517.30 W (PoE: 400 W) |
| Noise | Sound power at normal temperature: 49.3 dB(A) Sound power at high temperature: 63 dB(A) Sound pressure at normal temperature: 37.3 dB(A) |
Sound power at normal temperature: 38.1 dB(A) Sound pressure at normal temperature: 26.1 dB(A) |
Sound power at normal temperature: 47.9 dB(A) Sound pressure at normal temperature: 34.22 dB(A) |
| Long-term operating temperature | -5°C to +50°C | ||
| Storage temperature | -40°C to +70°C | ||
| Relative humidity | 5% to 95% (non-condensing) | ||
| Heat dissipation mode | Air cooling, intelligent fan speed adjustment | ||
Table 3: ekitEngine S310-24T8J4X, eKitEngine S310-48T4S, eKitEngine S310-48T4X
| Item | ekitEngine S310-24T8J4X | eKitEngine S310-48T4S | eKitEngine S310-48T4X |
|---|---|---|---|
| Switching capacity | 168 Gbps | 104 Gbps | 176 Gbps |
| Packet forwarding | 126 Mpps | 77 Mpps | 131 Mpps |
| Fixed port | 24 x 10/100/1000BASE-T ports, 8 x 2.5GE SFP ports, 4 x 10GE SFP+ ports | 48 x 10/100/1000BASE-T ports, 4 x GE SFP ports | 48 x 10/100/1000BASE-T ports, 4 x 10GE SFP+ ports |
| Chassis dimensions (H x W x D) | 43.6 mm x 442 mm x 420 mm | ||
| Chassis height | 1 U | ||
| Weight in full configuration (including packaging materials) | 6.57 kg | 3.59 kg | 3.59 kg |
| Power module type | Built-in AC power module | ||
| Rated voltage | 100 V AC to 240 V AC,50/60 Hz | 100 V AC to 240 V AC, 50/60 Hz | |
| Maximum voltage | AC input: 90 V AC to 290 V AC, 45 Hz to 65Hz | AC input: 90 V AC to 290 V AC, 45 Hz to 65Hz | |
| Maximum power consumption | 49.52W | 52.05 W | 44.3 W |
| Noise | Sound power at normal temperature: 41.9 dB(A) Sound power at high temperature: 58.6 dB(A) Sound pressure at normal temperature:29.9 dB(A) |
Sound power at normal temperature: 46.6 dB(A) Sound power at high temperature: 54.3 dB(A) Sound pressure at normal temperature:34.6 dB(A) |
Sound power at normal temperature: 46.6 dB(A) Sound power at high temperature: 54.3 dB(A) Sound pressure at normal temperature: 34.6 dB(A) |
| Long-term operating temperature | -5°C to +50°C (0 m to 1800 m). When the altitude ranges between 1800 m and 5000 m, the operating temperature reduces by 1°C each time the altitude increases by 220 m. | ||
| Storage temperature | -40°C to +70°C | ||
| Relative humidity | 5% to 95% (non-condensing) | ||
| Heat dissipation mode | Air cooling, intelligent fan speed adjustment | ||
Table 4: ekitEngine S310-48P4X, eKitEngine S310-48P4S, eKitEngine S310-48S4X
| Item | ekitEngine S310-48P4X | eKitEngine S310-48P4S | eKitEngine S310-48S4X |
|---|---|---|---|
| Switching capacity | 176 Gbps | 104 Gbps | 176 Gbps |
| Packet forwarding | 131 Mpps | 77 Mpps | 131 Mpps |
| Fixed port | 48 x 10/100/1000BASE-T ports (PoE+), 4 x 10GE SFP+ ports | 48 x 10/100/1000BASE-T ports (PoE+), 4 x GE SFP ports | 48 x GE SFP ports, 4 x 10GE SFP+ ports |
| Chassis dimensions (H x W x D) | 43.6 mm x 442 mm x 220 mm | ||
| Chassis height | 1 U | ||
| Weight in full configuration (including packaging materials) | 4.29 kg | 4.29 kg | 3.74 kg |
| Power module type | Built-in AC power module | ||
| Rated voltage | 100 V to 240 V AC, 50/60 Hz | 100 V to 240 V AC, 50/60 Hz | 100 V AC to 240 V AC,50/60 Hz |
| Maximum voltage | AC input: 90 V AC to 290 V AC, 45 Hz to 60 Hz | AC input: 90 V AC to 290 V AC, 45 Hz to 60 Hz | AC input: 90 V AC to 290 V AC, 45 Hz to 65Hz |
| Maximum power consumption | Without PoE: 64.7 W With PoE: 462.8 W (PoE: 380 W) | Without PoE: 63.7 W With PoE: 462.8 W (PoE: 380 W) | 84.1W |
| Noise | Sound power at normal temperature:49.3 dB(A) Sound power at high temperature: 63 dB(A) Sound pressure at normal temperature:37.3 dB(A) |
Sound power at normal temperature:49.3 dB(A) Sound power at high temperature: 63 dB(A) Sound pressure at normal temperature:37.3 dB(A) |
Sound power at normal temperature:45.6 dB(A) Sound power at high temperature: 58.6 dB(A) Sound pressure at normal temperature:33.6 dB(A) |
| Long-term operating temperature | -5°C to +50°C | ||
| Storage temperature | -40°C to +70°C | ||
| Relative humidity | 5% to 95% (non-condensing) | ||
| Heat dissipation mode | Air cooling, intelligent fan speed adjustment | ||
Table 5: eKitEngine S310-48HP4X, eKitEngine S310-48PN4X, eKitEngine S310-24U4X
| Item | eKitEngine S310-48HP4X | eKitEngine S310-48PN4X | eKitEngine S310-24U4X |
|---|---|---|---|
| Switching capacity | 176 Gbps | 320 Gbps | 128 Gbps |
| Packet forwarding | 131 Mpps | 238 Mpps | 95 Mpps |
| Fixed port | 48 x 10/100/1000BASE-T ports (PoE+), 4 x 10GE SFP+ ports | 48 x 10/100/1000/2.5GBASE-T ports(PoE+), 4 x 10GE SFP+ ports | 24 x 10/100/1000BASE-T ports (PoE++), 4 x 10GE SFP+ ports |
| Chassis dimensions (H x W x D) | 43.6 mm x 442 mm x 220 mm | ||
| Chassis height | 1 U | ||
| Weight in full configuration (including packaging materials) | 8.04 kg | 7.43 kg | 7.99 kg |
| Power module type | Built-in AC power module | ||
| Rated voltage | 100 V to 240 V AC, 50/60 Hz | 100 V to 240 V AC, 50/60 Hz | 600 W AC power modules delivered by default |
| Maximum voltage | AC input: 90 V AC to 290 V AC, 45 Hz to 60 Hz | AC input: 90 V AC to 290 V AC, 45 Hz to 60 Hz | N/A (Power modules specified) |
| Maximum power consumption | Without PoE: 74.66 W With PoE: 991.74 W (PoE: 846 W) | Without PoE: 115.2 W With PoE: 510.5 W (PoE: 360 W) | Without PoE: 51.6 W(with 2 x 600W AC power module ); 54.7 W(with 2 x 1000W AC power modules); 65.3 W(with 2 x 1000W DC power modules); Full PoE load: 2428.11 W (PoE: 2268 W, with 3 x 1000 W AC power modules) |
| Noise | Sound power at normal temperature:67 dB(A) Sound power at high temperature: 76.6 dB(A) Sound pressure at normal temperature:55 dB(A) |
Sound power at normal temperature:51.4 dB(A) Sound power at high temperature: 59 dB(A) Sound pressure at normal temperature:37.72 dB(A) |
Three 600 W AC PoE power modules with 30% load: 38 dBA Three 1000 W AC PoE power modules with 30% load: 37.9 dBA Three 1000 W DC PoE power modules with 30% load: 36.5 dBA |
| Long-term operating temperature | -5°C to +50°C | ||
| Storage temperature | -40°C to +70°C | ||
| Relative humidity | 5% to 95% (non-condensing) | ||
| Heat dissipation mode | Air cooling, intelligent fan speed adjustment | ||
Service Features
| Feature | Description |
|---|---|
| MAC address table | Automatic MAC address learning and aging 16K MAC address entries at maximum Static, dynamic, and blackhole MAC address entries Source MAC address filtering Limitation on the number of MAC addresses learned by an interface |
| VLAN features | 4094 VLANs Voice VLAN MUX VLAN VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports VLAN stacking |
| Ethernet switching | Smart Link tree topology and Smart Link multi-instance, providing millisecond-level protective switchover G.8032 Ethernet Ring Protection Switching (ERPS) STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) BPDU protection, root protection, and loop protection BPDU tunnel |
| Multicast | IGMPv1/v2/v3 snooping and MLD snooping |
| IP routing | Static routing and policy-based routing (PBR) |
| IPv6 features | OSPFv2, OSPFv3 512 FIBv4 entries at maximum 512 FIBv6 entries at maximum Neighbor discovery (ND) PMTU IPv6 ping, IPv6 tracert, and IPv6 telnet |
| Reliability | Link Aggregation Control Protocol (LACP) Virtual Router Redundancy Protocol (VRRP) Bidirectional Forwarding Detection (BFD) Link Layer Discovery Protocol (LLDP) |
| QoS/ACL | Traffic rate limiting in the inbound and outbound directions of a port Packet redirection Port-based traffic policing and two-rate three-color CAR Eight queues on each port DRR, SP and DRR+SP queue scheduling algorithms Re-marking of the 802.1p and DSCP priorities for packets Packet filtering on Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, or VLAN Rate limiting in each queue and traffic shaping on ports Network Slicing (VLAN) |
| Security features | Hierarchical user management and password protection Defense against DoS, ARP, and ICMP attacks Binding of the IP address, MAC address, port ID, and VLAN ID Port isolation, port security, and sticky MAC Blackhole MAC address entries Limitation on the number of learned MAC addresses IEEE 802.1X authentication and limit on the number of users on a port Multiple authentication modes including AAA, RADIUS, HWTACACS and NAC authentication SSH v2.0 HTTPS CPU defense Blacklist and whitelist |
| Management and maintenance | DHCPv6 client, DHCPv6 server, DHCPv6 relay, DHCPv6 snooping DHCPv4 client, DHCPv4 server, DHCPv4 relay, DHCPv4 snooping iStack Cloud management based on NETCONF/YANG Virtual cable test (VCT) Remote configuration and maintenance by using Telnet SNMPv1/v2/v3 RMON Web system-based management HTTPS LLDP/LLDP-MED System logs and alarms based on severities 802.3az: Energy Efficient Ethernet (EEE) |
Interoperability
- Port mirroring
- Deployment through the registration query center
- VBST, working with PVST, PVST+, and RPVST
More Information
For more information about Huawei switches, visit Huawei's official website or contact Huawei's local sales office. Alternatively, you can contact us through one of the following methods:
- Global branches: https://e.huawei.com/en/about/service-hotline
- Enterprise technical support website: https://support.huawei.com/enterprise/en/index.html
- Service email address for enterprise users: support_e@huawei.com
