Polaroid Digital Photo Frame User's Manual

Important Safety Instructions

CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

Note: Do not touch the color TFT LCD screen.

Proper Handling of the Digital Photo Picture Frame

Always handle the Digital Photo Picture Frame carefully. Avoid touching the LCD screen as natural skin oils are very difficult to remove.

Always position the Digital Photo Picture Frame on a stable and level surface. Unstable surfaces can cause the Digital Photo Picture Frame to topple and fall, resulting in possible damage or injury.

Avoid exposing the Digital Photo Picture Frame to direct sunlight or high temperatures, which can damage or shorten its life. Do not place the unit near heat sources such as radiators, heat registers, or other appliances that generate heat. Orient the Digital Photo Picture Frame away from direct sunlight to reduce glare.

Avoid exposing the Digital Photo Picture Frame to rain, water, moisture or high humidity. Do not place it in a bathroom or kitchen near a sink or where it may come in contact with water.

Never place heavy or sharp objects on the LCD panel, frame, or power cord.

Overloading Outlets

Do not overload electrical power sources when using the Digital Photo Picture Frame. Overloading wall outlets, circuits, or extension cords can result in overheating, fire, or electric shock. Use only grounded or polarized outlets.

Power Cord Protection

To minimize wear on the power supply cord, the power supply cord should be routed away from foot traffic and contact with other objects. Do not route the power cord under rugs or carpeting. The cord should never be severely bent, pinched, or twisted. Periodically inspect the power cord and each end of the cord for wear or damage. Unplug and replace the cord if it is damaged.

Ventilation

Slots and openings on the Digital Photo Picture Frame are provided for ventilation purposes. To ensure proper ventilation and reliable operation of the product do not place Digital Photo Picture Frame on a bed, sofa, rug or similar surface. Do not place it in an enclosed space such as a bookcase, unless proper ventilation is provided.

Controls and Basic Instructions

Congratulations on your purchase of your Polaroid Digital Photo Frame. Please read carefully and follow all instructions in the manual and those marked on the product before first use. Failing to follow these warnings may result in personal injury or damage to the device. Remember to keep this User's Manual in a convenient location for future reference. Important: Save the original box and all packing material for future shipping needs.

Controls

The Digital Photo Frame features several ports and controls:

• Memory Card Slots: Supports Secure Digital™, Multi Media Card™, Memory Stick™, Memory Stick PRO™, Memory Stick Duo™, Memory Stick PRO™ Duo™.
• Mini USB Port: For connecting to computers or other devices.
• USB host port: For connecting USB flash drives.
• AC power input: For connecting the power adapter.
• Brightness Control: Adjusts screen brightness.
• Control Lock: Secures the frame's settings.
• Adjustable base: Allows tilting the frame.
• Power switch: Turns the device on or off.

Diagram Description: The frame has ports on the side and controls on the top. The back features a power switch, control lock, and adjustable base.

Remote Control

The included remote control allows for convenient operation of the Digital Photo Frame.

Remote Control Buttons:

• Power: [power-symbol] Press to power on or off.
• Slide Show: [slideshow-icon] Press to start/stop a photo slideshow.
• Rotate: [rotate-icon] Press to rotate photos 90 degrees clockwise.
• Display Type: [display-type-icon] Press to change aspect ratio from 4:3 to 16:9 and back.
• SETUP: [setup-icon] Press to set up system parameters.
• Left Arrow: [left-arrow] Press to move left when selecting files.
• Up Arrow: [up-arrow] Press to move up when selecting files.
• Zoom/Enter: [zoom-enter-icon] Press to confirm selection, play still images, or zoom in up to 16x.
• Right Arrow: [right-arrow] Press to move right when selecting files.
• Exit: [exit-icon] Press to go back to the previous menu.
• Down Arrow: [down-arrow] Press to move down when selecting files.

Quick Start

Quick Start Instructions

1. Plug the AC adapter into the Digital Photo Frame and then into a wall outlet.
2. Insert a memory card into the slot or connect peripheral USB equipment into the USB host port. Supported memory cards include: Secure Digital™, MultiMedia Card™, Memory Stick™, Memory Stick Duo™.
3. Turn on the Power Switch located on the back of the Digital Photo Frame.
4. Upon powering on, the unit will automatically display the “Select Card" page.

Select Card Page Description: The "Select Card" page displays options for memory card types (SD/MMC/MS, USB Flash Drive, Internal Memory) and a SETUP option.

5. Press the [right-arrow] or [left-arrow] button to select a memory card type and press the ▶️ [play-icon] button to enter Photo mode. Thumbnails of your images will be displayed.
6. Press the [exit-icon] button to return to the "Select Card" page.
7. To view a picture, use the [right-arrow] or [left-arrow] button to select it and press the ▶️ [play-icon] button to view it in full screen. Press the [exit-icon] button to return to thumbnail mode.
8. While viewing a picture, press the ▶️ [play-icon] button again to enlarge the current picture. Press the [exit-icon] button to return to thumbnail mode.
9. From the "Select Card" page, press the [right-arrow] or [left-arrow] button to select the SETUP mode and press the ▶️ [play-icon] button to enter. Scroll to the “LANGUAGE” option using the [right-arrow] or [left-arrow] button and press ▶️ [play-icon] to enter its submenu. Select your preferred language and press ▶️ [play-icon] to confirm. The SETUP mode also allows configuration of “Slideshow Time”, “Display Mode”, “Transition Effect”, “Reset Settings”, and “Auto Slide show Setting”.

Notes:

• If no memory card is inserted, pressing the slideshow button will play demonstration images. Refer to “Demo Slide Show” on page 8 for details.
• Remote control functions: Use the [right-arrow]/[left-arrow] buttons to scroll forward/backward, [up-arrow]/[down-arrow] buttons to scroll up/down, and the ENTER/ZOOM button to enter, play, or confirm. Press the [exit-icon] button to go back.

Controls and Basic Instructions - continued

Control Button Functions

All settings can be controlled via the frame's top buttons or the remote. Access the setup menu by using the remote or pressing the [right-arrow] or [left-arrow] button on the frame, highlighting the wrench icon [setup-icon], and pressing the ▶️ [play-icon] button.

OSD Menus and Settings:

Control Button Functions - continued

Accessing Menus:

Viewing Pictures Individually:

Select Card Page Navigation:

Demo Slide Show

The Digital Photo Frame comes with pre-loaded demonstration pictures that can be viewed without inserting a memory card. Power on the frame, and after a few moments, the demo slideshow will start automatically.

Connecting a USB Device to the Digital Photo Frame

Your Digital Photo Frame has a built-in USB port. Using a USB cable (not included) and your digital camera or a USB flash drive, you can view images directly from the USB source.

1. Connect the AC adapter to the Digital Photo Frame and slide the power switch to the “on” position.
2. Connect one end of a USB cord to a USB device (e.g., digital camera, USB flash drive) and the other end to the Digital Photo Frame.
3. Once the Digital Photo Frame recognizes the USB source, you can view all pictures from the camera's internal memory, its memory card, or the USB flash drive.

Connecting your Digital Photo Frame to a computer

Use the supplied USB cable to connect your digital picture frame to a computer for file transfer.

1. With the frame turned off, connect the small end of the cable to the frame and the large end to your computer.
2. Turn the frame on and allow the computer a few moments to recognize the device.
3. The frame's internal memory and any inserted memory cards will appear as external storage devices on the computer. Click on "Open folder to view files" to add or delete photos from the device or memory cards.

Changing Picture Frames

Changing the physical frame of your Digital Photo Frame is a simple three-step process:

1. Locate the lock on the side of the back cover. Slide the lug in the indicated direction to release the back cover from the frame.
2. Lift the back cover and gently pull it from the two slots on the other side of the frame.
3. To reattach a new frame, hold the back cover at a slight angle, insert the two wedges on the back cover into the matching slots of the frame. To lock it into place, slide the lug to the "LOCK" position.

Frequently Asked Questions (FAQ)

Q: What other media formats can the Digital Photo Frame support? Why will it not play all images?

A: The Digital Photo Picture Frame supports JPEGs taken from a digital camera. It may not read all image formats.

Q: I have a memory card in the Digital Photo Frame, but it's not reading the card. What should I do?

A: First, ensure you are using a supported memory card. Second, verify the memory card is inserted fully into the correct slot. Third, press the [exit-icon] button until you reach the "Select Card" page. If the memory card is properly inserted, its icon will be highlighted.

Note: Some digital cameras save images in non-standard formats. Consult your camera's operating manual for specifics.

Q: Why do some pictures load faster than others?

A: Higher resolution pictures load slower. Using a lower resolution when taking pictures can speed up loading time.

Technical Specifications and Recycling

Technical Specifications

• Product: 7" LCD Screen Digital Photo Picture Frame
• Resolution: 480 x 234 pixels
• Input Formats: Secure Digital™, Multi Media Card™, Memory Stick™, Memory Stick Duo™

Questions? Need some help? Call our help line or visit www.polaroid.com.

RoHS

WEEE: This product contains electrical or electronic materials. Improper disposal may have adverse environmental and health effects. The WEEE label indicates separate collection is required. As a consumer, you are responsible for proper disposal. For disposal instructions, visit www.polaroid.com and click on "Company" or call the customer service number for your country listed in the manual.

"Polaroid" and "Polaroid and Pixel" are trademarks of Polaroid Corporation. For service, support, and warranty information, visit www.polaroid.com.

Part No.: OM6096US001

Printed in China