Thule EasyFold 3 2-bike (9441, 9442)

Introduction

This document provides instructions for the Thule EasyFold 3 2-bike, a tow bar-mounted bicycle carrier designed for transporting up to two bikes. It covers assembly, mounting, bike loading, and safety guidelines.

For additional information, accessories, and support, please visit Thule.com.

Important Safety Information

Read all instructions carefully before use and keep them for future reference.

Key Symbols:

• ⚠️ WARNING: Indicates a hazardous situation that could lead to death or serious injury if not avoided.
• ❗ CAUTION: Indicates a hazardous situation that could lead to minor or moderate injury if not avoided.
• ➡️ MANDATORY ACTION: Instructions that must be followed to prevent injury and damage to the product or other equipment.
• ℹ️ NOTICE: Instructions to prevent damage to the product or other equipment.
• ? NOTE: Additional information for trouble-free and optimal product use.

Product Components

The Thule EasyFold 3 2-bike carrier includes the main frame, support arms, wheel holders, straps, locking mechanisms, and various fasteners (bolts, nuts, Allen key).

Assembly and Installation

Follow these steps to assemble and mount the carrier onto your vehicle's tow bar.

Step 1: Initial Assembly

Assemble the main frame components and attach the support arms using the provided hardware, including bolts and an Allen key.

Step 2: Mounting to Tow Bar

Position the carrier onto the tow bar's tow ball. Ensure correct alignment and secure it using the carrier's locking mechanism. A checkmark indicates proper mounting, while an 'X' signifies incorrect mounting.

Step 3: Securing the Carrier

Operate the locking knob or lever to firmly attach the carrier to the tow bar. A click sound and indicator confirm secure locking.

Step 4: Deploying the Carrier

Extend the carrier's arms and unfold the main structure to prepare for bike loading.

Loading and Securing Bikes

Step 5: Securing Bike Frames

Place bikes onto the carrier and secure their frames using the provided straps or clamps. Tighten the securing mechanisms properly. Ensure correct positioning of the bike frame within the clamp.

Step 6: Securing Bike Wheels

Attach wheel holders and secure the bike wheels using the straps. Ensure straps are correctly routed and tensioned.

Step 7: Attaching License Plates

Attach the license plate brackets (e.g., AA 11 22) to the carrier as shown.

Locking Mechanisms

Use the provided keys to lock the carrier to the tow bar and to lock the bike frames to the carrier, preventing theft.

Tilting Function

The carrier features a tilting mechanism to allow access to the vehicle's trunk. Operate the tilt lever to tilt the carrier forward. Ensure the carrier is properly secured in both the upright and tilted positions.

Transporting Bikes

Load up to two bikes onto the carrier. Ensure bikes are spaced adequately (e.g., >10 cm between bikes) and that their frames are securely fastened with straps. Pay attention to the correct angle and strap path for optimal security.

Carrier Removal and Storage

Follow the instructions to safely remove the carrier from the tow bar and fold it for storage.

Accessories and Maintenance

Information on available accessories and spare parts, including light bulb replacement, is provided.

Diagrams show:

• Assembly of accessories.
• Use of cleaning fluid (H2O).
• Replacement of light bulbs for the carrier's lights, specifying bulb types (e.g., 12V P21W, 12V W5W).

Specifications and Warnings

Pay attention to tow bar fitment requirements (dimensions) and maximum load capacities for both the carrier and the bikes. Warnings are provided regarding incorrect handling, loading, and operation.