Ruko U11 Mini GPS Drones Camera User Manual

User Manual for Ruko models including: U11, U11 Mini GPS Drones Camera, Mini GPS Drones Camera, GPS Drones Camera, Drones Camera, Camera

U11MINI说明书压缩

user manual part2

Shenzhen Ruike Innovation Technology Co., Ltd U11MINIYK Drone 2AXQL-U11MINIYK 2AXQLU11MINIYK u11miniyk

File Info : application/pdf, 25 Pages, 4.33MB

GetApplicationAttachment.html?id=7841171

U11MINI User Manual
5.2 Control interface

Back

GPS Status

Controller Battery Level

Aircraft Battery Level

Auto Takeoff/Landing

Return to home

Shutter

Photo/video

Photo Album

Compass Interference Value

A higher value indicates greater ambient interference . Reaching 200 will prompt compass calibration, and reaching 400 will force entry into compass calibration

D 0.0m H 0.0m DS 0.0m/s VS 0.0m/s

D : Distance H : Height DS : flight speed VS : ascent and descent speed

1 . SD card capacity display SD 2 . Format : Click to format when the memory card is loaded and cannot be
recognized or save files

U11MINI User Manual
Attitude Indicator Display information of the orientation of the aircraft, and position of the remote controller.
Safety
Beginner Mode : In this mode, the aircraft' s farthest flight distance and altitude is 98ft so that the aircraft can fly more safely within sight. Flight Distance: Set the longest distance to fly. Flight Height : Set the maximum flight height. Gyroscope CalibrationWhen the drone is unstable, it can be placed horizontally to re-calibrate. Compass CalibrationCalibrate the compass first when flying in a new location or complex environment.
Copyright ©2024 Ruko All Rights Reserved. 41

U11MINI User Manual
Settings
1. SD Card Resolution SavedSet the smooth mode or default mode. 2. Watermark; Choose from 2 kinds of watermarks. 3. UnitSwitch between metric and imperial units of measurement. 4. RecordingWhen recording a video, you can record the sound into
the video. 5. Voice promptVoice prompts the status of the drone when the APP
is opened or closed. 6. Display prompt messageSwitch on or off the prompt bar.
42 Copyright ©2024 Ruko All Rights Reserved.

Track

U11MINI User Manual

Flight records; All Flight Records: The date, location, distance, duration and maximum altitude of each flight. Find Drone: It shows the last position of the aircraft when it lost the image transmission signal. Open the map to find the position where the aircraft is disconnected from the App. Flight Logs: You can export the flight log data. Drone information display: APP version, Wi-Fi version, ID number.
Copyright ©2024 Ruko All Rights Reserved. 43

U11MINI User Manual
Before using the RUKO U11 app, please correctly enable the required permissions for the app: Allow RUKO U11MINI to get your location. Otherwise, the following functions cannot be realized. Allow RUKO U11MINI to connect to the mobile phone on the local network, otherwise you will not be able to see the aircraft image transmission screen. Allow RUKO U11MINI to access to albums, recordings and other permissions. When using the RUKO U11 app on your phone, please keep your phone running smoothly and close other background software that you do not use. The map used in the map interface needs to be downloaded from the Internet. Before using
44 Copyright ©2024 Ruko All Rights Reserved.

U11MINI User Manual
6 FIight
After the installation preparation is complete, please conduct flight training or training first. It is recommended to conduct training in the beginner mode. Please choose a suitable flight environment when flying. The flying altitude is limited to 393ft, and the local laws and regulations must be strictly observed during flight. Please be sure to read the U11MINI Disclaimer and Safety Summary, and understand the safety precautions before flying.
6.1 Flight Environment Requirements
1. Do not fly in severe weather such as strong wind, snow, rain, and fog.
2.Choose an open place with no obstructions around as the flying field. The compass and GPS signals on the Aircraft will be interfered by buildings, mountains, and trees. It is recommended to fly in an open space with a diameter of 32 ft without interference. It is recommended that the flight altitude be greater than 49 ft to avoid ground obstacles and other signal interference from the ground.
3.When flying, keep in sight and control, and stay away from obstacles, crowds, etc. When flying on the water surface, please be more than 9 ft above the water surface.
4.The Transmitter may be interfered by high-voltage lines, communication base stations or transmission towers. Please fly away from these areas.
5.Please fly below 6561 ft above sea level to ensure that the Air pressure setting function of the Aircraft can work normally.
6.When GPS is active, the Aircraft can achieve stable hovering, intelligent return to home, and intelligent flight functions. When the GPS function fails, these functions cannot be implemented. The Aircraft will be unable to hover, drifting away in the direction of the wind.
Copyright ©2024 Ruko All Rights Reserved. 45

U11MINI User Manual
6.2 Pre-Flight Checklist
1. Whether the remote controller, intelligent flight battery, and mobile device are fully charged.
2.Make sure that the aircraft arms are fully extended. Make sure that the battery compartment cover is fastened firmly and the intelligent flight battery is installed firmly.
3.Ensure that the propeller is free from damage, aging, deformation, no foreign matter entanglement, and secure installation.
4.Please make sure that GPS is turned on to avoid that it would be lost, please fly outdoor in an open place.
5.Whether the 4 motors can start normally after power-on, and whether the rotation speeds are consistent.
6.Ensure that the data cable between the mobile phone and the remote control is firmly installed and successfully connected.
7. Make sure the camera is clean. 8.If you need to replace parts, be sure to use original parts. The use
of non-original accessories may cause danger to the safe use of the Aircraft. 9.For details on accessory support, please refer to the accessory support page in the appendix of the user manual.
46 Copyright ©2024 Ruko All Rights Reserved.

U11MINI User Manual
6.3 Pairing
Match the aircraft with the transmitter and mobile phone 1.Long press the power button of aircraft, the motor light will be on and you will hear a power-on sound, indicating that the aircraft has been turned on; 2.Long press the transmitter power button once to turn on the Transmitter switch; 3.The light of the remote control turns from flashing to steady on and emits' drop; ', indicates that the frequency is successfully matched.
6.4 Connection&Settings
1. Connect the phone with the remote control via data cable and then set up.
2.Tap the APP, the first time to use the interface will pop up the permission setting.
Copyright ©2024 Ruko All Rights Reserved. 47

U11MINI User Manual
Please allow the following permissions 1.mobile phone location rights 2.network rights 3.recording rights 4.album access rights
IPhone Settings
Android phone USB Settings
48 Copyright ©2024 Ruko All Rights Reserved.

U11MINI User Manual
3. When you enter the operation interface and see the image transmission screen of the drone, the connection is successful.

O N/A

H N/A

1. When connecting the data cable, ensure that the plug of the data cable is in place.
2. For some mobile phones, due to the reasons of the phone case, the plug of the data cable is not installed in place, resulting in data transmission failure, poor contact, and no way to see the transmitted image.
3. Please set the permissions required by the APP correctly to avoid the inability to preview the image
4. USB Settings on some Android phones are hidden in the "Developer options" , you need to change the "Default USB configuration" to "Transferring files" after opening the developer mode. (The way to open "Developer options" varies depending on the phone model. You can search Google for details.)

U11MINI User Manual
6.5 Calibration before flight
Calibrate the compass When the drone flies in a complex environment or when the magnetic field interference exceeds the set value, it is necessary to calibrate the compass.

1. Push the left and right joysticks to the "11 o'clock" and "1 o'clock" hold for 2 seconds (as shown in picture 1)or tap "Compass calibration" on the APP calibration interface (as shown in picture 2) to turn off the green light of the drone and enter the calibration step;

Turn 3 times

U11MINI User Manual
2. At this time, you need to follow the prompts to pick up the Aircraft at a distance of 3.28 ft from the ground and rotate the Aircraft horizontally for 3 laps until the app interface prompts to enter the vertical calibration.
3. Pick up the Aircraft at a distance of 3.28 ft from the ground, and rotate the Aircraft 3 laps vertically with the camera facing upwards until the prompt of vertical calibration on the app interface disappears. After the compass calibration is completed, place the Aircraft on a level ground. At this time, the three lights of the drone flash in turn.
Turn 3 times

Before the flight, pay attention to the compass interference value

on the APP. (

)When the interference value is close to 120, we

can manually calibrate the compass, or change the environment

to fly. When the interference value exceeds 180, the drone will

automatically enter the compass calibration.

When the Aircraft is flying in a circle or out of control in a complex environment, the aircraft compass calibration is not standard or interfered. Please land the Aircraft manually in time to manually calibrate the Aircraft (refer to the first step of calibrating the compass).

When calibrating the Aircraft, please open the arm and keep the aircraft 1 meter above the ground to avoid the influence of the magnetic field of the motor.

U11MINI User Manual
6.6 Calibrate the gyroscope
Calibrate the gyroscope 1. Make sure that the Aircraft is placed on a level ground. 2. It can be calibrated by gyroscope calibration function of APP.
Or push the right joystick of the remote control to the "5 clock" position for calibration. 3. The rear light flashes quickly, and the drone enters horizontal automatic calibration 4. The light changes back to the original light state, indicating that the calibration is complete 5. "Fly" is displayed in the app, and you can now prepare to take off.
When the Aircraft's flight state is tilted and unstable, please land the Aircraft on a level ground for gyroscope/horizontal calibration. When the tilt Angle of the fuselage is greater than 10°, the horizontal correction cannot be performed.
52 Copyright ©2024 Ruko All Rights Reserved.

U11MINI User Manual
6.7 Starting/Stopping the Motors
Starting the Motors Push the joysticks into 5 & 7' o clock positions to start the motor. After the motor starts, please release the rocker immediately.
Stopping the Motors After the motor starts rotating, there are two ways to stop: Method 1: After the Aircraft takes off, push the throttle stick to the lowest position and operate the Aircraft to land until the motor stops, then release the joystick. Method 2: When the flight is not taking off, Push the joysticks into 5 & 7' o clock position to stop the motor. After the motor is turned off, please release the joystick immediately.
When manually landing the aircraft, continue to pull down the remote control throttle lever, landing 1.6 ftc0.5 meters) will stop, confirm the landing continue to pull down the throttle lever, the drone will land and stop the motor. Please choose the flat surface to landing.
Copyright ©2024 Ruko All Rights Reserved. 53

U11MINI User Manual
6.8 Auto Takeoff/Landing
Auto Takeoff After the Aircraft is calibrated, users can use the take-off function on the app:
1. Start the motor after confirming the safe take-off conditions.
2. Tap "" on the App to take off.
3. Slide to unlock motor.
4. Click the One-key Takeoff button on remote controller or enter the app and click to take off.
5. The Aircraft will take off automatically and hover at a distance of 1.5m(4.9ftfrom the ground.

7.4V

16GB/ 14GB

Lens

O N/A

H N/A

H.5 N/A

V.5 N/A

1.5m(4.9ft)

U11MINI User Manual
Auto Landing After the aircraft takes off, the user can choose to use the automatic landing function on the app:
1. Confirm the safe landing conditions, tap the "" on the APP,
2. Slide to confirm automatic landing.
3. The vehicle descends to the ground and turns off its motors.

7.4V

16GB/ 14GB

Lens

O N/A

H N/A

H.5 N/A

V.5 N/A

U11MINI User Manual
6.9 Basic Flight Steps
Basic Flight Steps 1. Place the Aircraft on a flat and open ground with the nose facing forward and the tail facing the pilot. 2.Press and hold to turn on the aircraft power. 3.Long press to turn on the remote control power, the drone and the remote control will automatically match the frequency, the time is about 50 seconds. 4.After a successful match, connect the phone to the remote control through the data cable (pay attention to the USB permission setting) 5.Open the RUKO U11 App, and enter the operation interface. 6.GPS signal search is completed, and the drone light is green and on. 7. Unlock and start the motor. 8.Slowly push the throttle stick upward to let the Aircraft take off smoothly. 9.Pull down the throttle stick to lower the Aircraft. 10.After landing, pull the throttle stick to the lowest position and hold it until the motor stops. 11. Turn off the power of Aircraft and Transmitter in turn after î shutdown.
56 Copyright ©2024 Ruko All Rights Reserved.

Aerial Photography Tips & Tricks 1. Perform pre-flight inspection.

U11MINI User Manual

2.It is recommended to take photos or videos in low-speed or medium-speed gear.

3.Choose sunny and less windy weather for shooting.

4.Push the stick as little as possible during the flight to make the Aircraft fly smoothly.

Awareness of flight safety is very important for the safety of you, the surrounding people and the environment. Please read the"Safety and Disclaimer Guidelines" carefully.

U11MINI User Manual
7 Appendix
7.1 Specification Parameter

Drone

Model Weight (Including Battery) Motor Model Operating Temperature Range Satellite Systems
Dimensions (L x W x H)
Controllable Range of Camera (Up and down) Focus Range
Resolution of Photo

Camera

Resolution of Video

Photo Format

Video Format

Supported SD Cards

Supported File Systems

Operating Frequency

Video Transmission Frame Rate
5G Transmission Operating Frequency
Max Operating Distance

Battery

Charging Time

Remote controller

Operating Time Operating Voltage Mobile Device Holder

Operating Temperature

U11MIINI <250g 1503 50°to 104°F (10°to 40°C) GPS / GLONASS Unfolded: 31 x 20.5x 5.7 cm Folded: 14.1x8.7 x 5.7 cm
About -90°TO+0°
Fixed-focus
Phone 3840 x 2160 P SD Card 3840 x 2160 P Phone 1280 x 720 P SD Card 3840 X 2160 P / 20FPS
2976×1680P / 30FPS JEPG MP4 Micro SD card(Class 10/U1 or later) 64G FAT32 5.15-5.35 GHZ; 5.725-5.825 GHZ 20 FPS 5.8G Up to 3KM (Outdoor and Unobstructed) 3000mAh Li-polymer About 4 Hours About 3.3 Hours 3.7V 4.7 to 6.7 Smart Phones 32°to 104°F (0°to 40°C)

Drone Battery
Charging Cable
APP

Capacity Voltage Battery Type Power Net Weight Max Charging Power Max Charging Time Charging Temperature Range Interface Type Input Output Rated Power APP Name
Mobile Phone System
Transmission Distance Connection Mode

7.2 Accessories

U11MINI User Manual
2200mAh 7.6V Li-polymer 16.72Wh 95 g /3.35 oz 7.5W "About 3 Hours(Depending onCharging Power)" 50°to 104°F (10°to 40°C) Type - C 100 - 240V, 50/60Hz, 0.5A 5V/1.5A or 5V/2A or 5V/3A 15W RUKO U11 "Android 6.0 And Above System IOS 10.0.2 And Above System "Up to 3KM (Outdoor and Unobstructed)"
Data line Connection

Intelligent Flight Battery

Spare Propeller

Remote Controller

The above accessories can be purchased by searching on Amazon and entering Ruko store.

Always use original accessories. The use of non-original accessories may pose a risk to the safe use of the aircraft.

U11MINI User Manual

7.2 Common Problems and Solutions

Question
The motors cannot be started
Unstable flight
Fly not far, fly out a distance to bounce back During flight, the direction of the drone `s flight is opposite or different to the direction of the remote control. The drone suddenly crashed

Reason

Solutions

Without GPS signal The red light stays on

Turn on the drone in an open area with a strong GPS signal, and signal full 3 bars or more to enable take-off.
The drone has low battery. Please charge the battery in time.

The green light goes out
The left and right joysticks are not in place
Flying too low, affected by aircraft airflow
The gyroscope is not calibrated
The propellers become deformed and incomplete GPS signal is unstable. Flying near buildings and in obstructed places

To begin compass calibration. Please refer to the Compass Calibration section of the user manual.
Push the left and right joysticks simultaneously to 5 o'clock and 7 o'clock for 2 seconds. Or use the one-click unlock take-off function on the APP.
Please fly the aircraft above 9.84ft(3 meters)
Place the aircraft on a horizontal surface and conduct gyroscope/horizontal calibration. Please refer to the "Gyroscope Calibration " section of the user manual
Replace the propellers with new ones
Please fly the aircraft in an open area free of obstacles within the circle of radius 32.81 ft(10 meters)

In beginner mode, you will only Enter the setting interface of APP, close the

be able to fly 30 metres in height beginner mode, set the flight distance

and 30 metres in distance.

and height, and save the Settings.

4 propellers are installed backwards or a wrong propeller is installed

When installing the propeller, install it according to the corresponding mark

1The battery is not installed

properly.

Check whether the battery or propeller is

2The propeller is not securely abnormal, and re-test after firm installation.

installed and falls off.

U11MINI User Manual

Question

Reason

Solutions

Out of control, spinning around on its own, abnormal sound

The remote controller signal is interfered or the aircraft exceeds the range of remote control

Please fly the aircraft outdoors without interference, and ensure that it is within a controllable range

Compass interference

Please manually land the aircraft in time and calibrate the compass. Please make sure to fly away from the buildings, trees, power lines, and signal towers

The propellers become deformed and incomplete

Replace the propellers with new ones

The photo captured by the drone The camera cover is not removed Remove the camera cover before flying.

was unusually blurry

The camera lens is dirty.

Use a clean cloth to clean the lens.

The aircraft is out of Wi-Fi range

Fly the aircraft within the range of the Wi-Fi

Video freezes, image transmission distance is short

Wi-Fi image transmission signal interference
The remote controller and the mobile phone are not pointed at the direction of the aircraft

Fly the aircraft in an unobstructed open area free of buildings, high-voltage wires and signal towers
Point the remote controller and the mobile phone at the flying direction of the aircraft to maintain the strongest signal connection

Phone performance freezes

Close unused apps running in the background to maintain the best performance of the phone

The phone is not connected to The phone and the remote control need to

Wi-Fi

be connected via data cable.

The phone settings conflict with the APP
No image is displayed on the App. Wrong app downloaded

Try turning on airplane mode on your phone.
Download the correct app (RUKO U11)

The drone cannot be paired with the remote controller

It takes about 40 seconds for the drone and the remote control to match, and the image captured by drone will be displayed once the match is successful.

APP crashes or functions abnormally

Wrong app downloaded
Some phone versions are old and incompatible with APP

Download the correct App(RUKO U11)
Please provide version and model of the phone, we will try to help you to solve it.

GPS signal is weak

When the drone is indoors.

GPS signals cannot be found indoors. Please search for GPS signals in an open area.

Please stay away from obstacles for more

Under the tree, next to the building, in an obstructed place

than 32.81 feet(10 meters), and search for GPS signals in an open area.

U11MINI User Manual

Question
Unable to return home, drifting and flying away

Reason
GPS signal was turned off during the flight
Flying next to buildings, there are covered areas under trees that cause GPS signals to be lost or unstable

Solutions Please don't turn off GPS suddenly during outdoor flight. Switch back to GPS mode in time.
Fly away from buildings or covered areas.

The remote control and the drone take a long time to match

It takes about 5 seconds to match the remote to the drone

Please wait patiently.

Unable to charge battery/Not fully charged

Using inferior charger or charging on the computer with unstable voltage output

Use a mobile USB charger that ensures constant stable voltage output(5V) and amperage output(2-3A)

Please use the original factory charging Using inferior charging cables cable to charge

Flying in windy weather

Flying in windy weather will accelerate power loss

Short battery life

The drone was not be charged The batteries are fully charged with the

when you received it

correct USB charger before flying.

Flying in cold weather

In low temperatures, the chemical reaction of the lithium battery is slowed down and the energy cannot be fully released

The product has slight marks

We tested all drone before shipping

In order to give you the best experience, we tested functions of all drone before shipping. Therefore, it is inevitable that there will be slight traces. However, it can be guaranteed that all drone are 100% brand new

The aircraft complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. Radiation Exposure Statement To maintain compliance with FCC's RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20cm from your body.
The motor complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement in portable exposure condition without restriction.

+1 (732) 207-0697

rukodrone@gmail.com

Adobe PDF library 15.00 Adobe Illustrator 24.3 (Macintosh)