Replacement Parts - Harbor Freight Tools
Owner's Manual for Harbor Freight models including: 93532, 193175545411, 93532 24 High Velocity Shop Fan, 93532, 24 High Velocity Shop Fan, Velocity Shop Fan, Shop Fan, Fan
Owner's Manual & Safety Instructions. Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance ...
2 дня назад — Owner's Manual & Safety Instructions. Save This Manual Keep this manual for ... 120 VAC / 60 Hz / 2.5 A. CFM @ Speed (Low / High) Low 5800 CFM / High ...
File Info : application/pdf, 4 Pages, 510.93KB
DocumentDocumentOwner's Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the back of the manual (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. 25b TM 24" HIGH-VELOCITY SHOP FAN Visit our website at: https://www.harborfreight.com Email our technical support at: productsupport@harborfreight.com 93532 When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-800-444-3353 as soon as possible. Copyright© 2025 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL. WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Indicates a hazardous situation which, if not avoided, will result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. Addresses practices not related to personal injury. TM READ AND SAVE THESE INSTRUCTIONS. IMPORTANT SAFETY INFORMATION 1. WARNING! To reduce the risk of fire or 10. Be sure fan is on a stable surface when electric shock, do not use this Fan with operating to avoid overturning. any solid-state speed control device. 11. DO NOT use fan in window. 2. WARNING! To reduce the risk of Rain may create electrical hazard. fire or electric shock do not use with an extension cord. 12. Maintain labels and nameplates on the fan. If unreadable or missing, contact 3. After servicing, any safety device shall be Harbor Freight Tools for a replacement. reinstalled or remounted as previously installed. 13. Use only in dry areas. 4. Do not leave Fan running while unattended. Do not use in bathrooms, laundry area, 5. Do not operate any fan with a damaged cord near sinks or other sources of water. or plug. Discard fan or return to an authorized 14. This fan is not a toy. service facility for examination and/or repair. Keep it out of reach of children. 6. Do not run cord under carpeting. Do not 15. People with pacemakers should consult their cover cord with throw rugs, runners, or similar physician(s) before use. Electromagnetic fields in coverings. Do not route cord under furniture close proximity to heart pacemaker could cause or appliances. Arrange cord away from traffic pacemaker interference or pacemaker failure. area and where it will not be tripped over. 16. The warnings, precautions, and instructions 7. Never insert fingers, pencils, or any other discussed in this instruction manual cannot cover object through Front or Rear Blade Guards. all conditions and situations that may occur. It must 8. Disconnect Fan when moving it from one location to another. be understood by operator that common sense and caution are factors which cannot be built into this fan, but must be supplied by operator. 9. Disconnect Fan before removing grills for cleaning. Page 2 For technical questions, please call 1-800-444-3353. 93532 Specifications Electrical Rating 120VAC / 60Hz / 2.5A CFM @ Speed (Low / High) Low 5800 CFM / High 7200 CFM Suitable for Commercial Use Only Dry Location, Indoor Use Only Operation Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. WARNING! Always make sure the Power Cord is unplugged from its electrical outlet prior to making any adjustments to the fan. 2. Plug in the Power Cord. 3. Set the Switch to either LOW or HIGH. WARNING! To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device. 1. Locate the Fan in a dry location out of children's reach and away from normal room traffic. 4. When finished, set the Switch to OFF. 5. To prevent accidents, turn off the fan and unplug it after use. Clean, then store the fan indoors out of children's reach. Inspection and Maintenance AUTOMATIC RESET SAFETY DEVICE IN MOTOR. TO REDUCE RISK OF INJURY DISCONNECT POWER SUPPLY BEFORE SERVICING. TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION OR ELECTRIC SHOCK: Before appliance inspection or maintenance, make sure the appliance's switch is turned off, the power cord is unplugged, and the unit has cooled completely. TO PREVENT SERIOUS INJURY FROM APPLIANCE FAILURE: Do not use damaged appliances. If abnormal noise or vibration occurs, have the problem corrected before further use. 1. BEFORE EACH USE, inspect the general condition of the fan. Check for: · loose hardware · misalignment or binding of moving parts · cracked or broken parts · damaged electrical wiring · any other condition that may affect its safe operation. 2. Clean regularly to prevent dust from accumulating on Blade. Use damp cloth during cleaning and dry before use. 3. WARNING! TO PREVENT SERIOUS INJURY: If the supply cord of this fan is damaged, it must be replaced only by a qualified service technician. Record Serial Number Here: Note: If fan has no serial number, record month and year of purchase instead. Note: Replacement parts may be available for this item. Visit harborfreight.com/parts for a list of in-stock parts. Reference UPC 193175545411. 93532 For technical questions, please call 1-800-444-3353. Page 3 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. TM 26677 Agoura Road · Calabasas, CA 91302 · 1-800-444-3353