Instruction Manual

Features

1. Durable ABS construction
2. Long range 5.0 Bluetooth capability
3. 2 x Speakers, 6W total
4. 4400mAh rechargeable Battery, can also be used as power bank
5. COB LED Light with High, Low, brightness control
6. Carabiner, so unit can be hung for convenience
7. Strong magnetic base and end, for secure positioning.

Scope of Delivery

1. Main unit
2. Carabiner (quick release clip)
3. Charge cable
4. Clam shell storage case
5. User Manual

Specifications

1. 10W COB LEDS: High: 800 Lumen; Low: 400 Lumen
2. Sound output: 6W (2 x 3W Speakers)
3. USB to USB-C Charging cable, 80cm
4. Battery: 3.7V, 4400mAh
5. Lighting run time: 5 hours (High Mode); 8 hours (Low Mode)
6. Charging Time: 4-5 Hours via USB Cable
7. Size: 206mm long x 76mm Diameter
8. Weight: 0.59Kg (Includes battery)

Operating Instructions

Charging

Lift the weather-proof rubber flap at the magnetic end of the main body. Connect the USB-C cable end (smallest end) into the main unit, then connect the larger USB cable end to any suitable USB outlet (e.g., your computer, vehicle, phone charger, or portable power bank). Once connected, the battery charge indicator lights will illuminate and show the charge level. When fully charged, all 4 lights will show solid. Ensure the weather cover is reinserted before taking the unit into any wet or dirty environments.

Bluetooth Connection

First, ensure your phone or other Bluetooth-enabled device has Bluetooth turned on (see Settings). Then, press and hold the center button (for 3 seconds) on the end of the main body. The unit will respond with the words "Power on, Bluetooth" and then shortly afterward "Bluetooth connected". The initial pairing may not occur automatically. In this case, open Bluetooth on your device and manually select the device connection. Once paired, it will automatically connect whenever the Speaker is powered on.

On the unit, the volume can be adjusted by the [+] or [-] buttons, and track selection can be made via the forward [>>] and reverse [<<] buttons.

To turn off, press and hold the center button (for 3 seconds). The unit will respond with the words "Power Off".

Light Operation

The ON/OFF button for the light is located adjacent to the COB LED. Warning: Do not look directly at the LEDs. Face the unit away from you and press the button once to turn ON Low lighting, press the button again for High lighting, and a third time to turn the light OFF.

Operating temperature: 0°C - 35°C

FCC Regulatory Conformance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.

RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Limited Warranty Policy

This Limited Warranty applies only to new products. It is a condition of this Limited Warranty Policy that all servicing requirements are completed as listed in the owner's manual (said servicing is at the owner's expense). SP Tools recommends that all servicing is completed by an Authorised Service Agent and that records of said servicing are retained by the purchaser as proof in the event of a warranty claim. The Limited Warranty period commences from the date of purchase.

SP Tools agrees, subject to the conditions of this warranty, SP Tools or its Authorised Service Centre will perform necessary warranty repairs on the product without charge for parts or labour if, in the opinion of SP Tools, the product does not perform in accordance with its specifications during the Limited Warranty period, due to any fault in manufacturing, materials, and/or workmanship within the specified warranty period. This warranty only applies to items purchased through SP Tools or its Authorised Distributors or Dealers. Warranty cover only applies if valid proof of purchase is presented at the time of making a claim.

The purchaser's attention is drawn to the following: To the extent permitted by law and subject to the Limited Warranty, and as part of the terms of the sale of the equipment or part thereof, SP Tools shall not be liable for any form of loss, damage, cost, injury, or harm of any kind (whether direct, indirect, special, or consequential) howsoever arising from the use or supply of the equipment to the purchaser.

The Warranty Period

12 months (1 Year)

Exclusions to Limited Warranty Policy

1. Fails due to an accident (including liquid spillage), abuse, misuse, neglect, or normal wear and tear.
2. Has been used in a manner other than for which it was originally designed.
3. Has been tampered with or is otherwise than as supplied by SP Tools.
4. Where any damage, malfunction, or other failure of the equipment or any part thereof resulted directly or indirectly from unauthorized persons adjusting or failing to adjust any part requiring normal maintenance and service (Examples include tightening of screws, nuts, and bolts, the replacement of brushes, or the correct storage of batteries).
5. Malfunctions due to the use of defective or incompatible accessories.
6. Is damaged by lightning or thunderstorm activity.

Claiming Warranty

The warranty may be claimed in the following manner:

1. In order to make a claim under this warranty, the purchaser must deliver the equipment or any part thereof to a repair agent and pay all costs of transportation.
2. The purchaser must deliver to the repair agent written reasons why the purchaser considers that the purchaser has a claim under the warranty and must provide all necessary details, including:
   • The place, date, and from whom the unit or part was purchased.
   • The unit or part involved Model and Serial Number.
   • The defect, malfunction, or failure in respect of which the claim is being made.
3. If the warranty claim is valid, the repair agent will carry out repairs and return the product at no charge to the purchaser. These repairs are limited to the warranty fault identified and as such will not include any other faults due to misuse, abuse, failure to maintain, fair wear and tear, or the replacement of serviceable items such as brushes, bearings, batteries, and the like.

SP Tools goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Note: After inspection, units which have failed due to non-warrantable causes will be subject to freight, repair, and/or quote charges.

THE PURCHASE DOCKET (OR SIMILAR PROOF OF PURCHASE) MUST BE RETAINED BY THE CUSTOMER AS IT WILL BE REQUIRED IN THE EVENT OF A CLAIM FOR WARRANTY BEING MADE.