CAR SOLUTIONS

WARNING

In order to protect driving safety and avoid breaking traffic laws, please DO NOT operate the interface while driving.

The reversing surveillance function is used only for reversing assistance. Please check the entire surroundings while reversing.

All steps of installation should be done by a well-trained specialist.

During installation, the ignition key should be taken off, and after all installation is finished, connect the power cable last.

Please DO NOT plug or pull connected cables while the power is on, to avoid damaging the monitor or accessory.

Install wiring in a manner that cables will not come into contact with metal parts. Wiring may be damaged by contact with metal parts, resulting in fire and shocks. Avoid all contact with hot surfaces when wiring the main unit. High temperatures may damage wiring, causing shorts, arcing, and fires.

Please DO NOT place the product in a damp environment or water, to avoid electric shock, damage, and fire accidents caused by a short circuit.

Kindly check all components are in the box when receiving the product. If anything is missing, inform the supplier/manufacturer.

Start the engine before loading. Check if the interface displays functions correctly, if key controls are correct, and if the vehicle interface has any scratches. Please provide feedback to the supplier/manufacturer if there are any questions.

Please note that disassembled automotive components should be placed carefully during the installation process to avoid scratching the instrument panel. Leftover connecting cables need to be managed, and DO NOT leave them in the car. The connecting plug must be insulated to prevent short circuits.

Cables should be connected properly. Vehicle installation space is limited, so reduce space usage as much as possible. Plan cable connections carefully to avoid affecting active components like steering wheel controls, throttle, and brake pedals. Cables need to be fastened after connection in case of drops.

FEATURES

• Integrated 2-in-1 module supports Apple CarPlay, Android Auto.
• Supports USB HD video (up to 1080P) and lossless music (APE, WAV, FLAC, MP3, WMA, etc.) playback.
• CVBS and HDMI (480P/720P) output.
• Automatic enable CarPlay/Android Auto when plugging in an iPhone/Android phone.
• Integrates BT module for Android Auto calling audio delivery.
• High-performance audio output and supports control of sound volume and EQ settings.
• Provides an external knob controller for operation.
• Offers a high-quality microphone for phone talking & voice command.
• Mobile phone charging capability.
• Further software updates via USB.

Diagram Description: A diagram shows the 'Universal CarPlay/Android Auto Box' connected to a controller. Cables are shown connecting to the box, leading to example displays of an iPhone interface (CarPlay) and an Android phone interface (Android Auto).

SPECIFICATIONS

Image Description: Images show the physical ports on the main unit, including a power outlet labeled '12V 180W MAX', an HDMI port, and a USB port. Another image shows the rear connectors of the unit with RCA and other cables.

This device is compatible with any car/monitor that has HDMI or RCA AV input.

PACKAGE COMPONENTS

• Main Unit (Model: CP-11)
• Power Cable
• Touch/Video Cable
• Knob Controller
• Microphone

CONNECTION DIAGRAM

The connection diagram illustrates how to connect the main unit to various components.

Top connections to the main unit:

• Resistive touch input (labeled TOUCH-CON-01)
• USB port for USB music & video
• Video in (Yellow RCA)
• Backup camera in (Yellow RCA)
• Backup detect wire
• KEY 1 & KEY 2 for SWC learning
• HDMI out

Side/Rear connections to the main unit:

• Video out (Yellow RCA)
• Audio L out (White RCA)
• Audio R out (Red RCA)
• Connect mobile phone (USB)
• Connect microphone (3.5mm jack)
• Connect knob controller

Bottom power connections:

• B+ (Red wire)
• ACC (Yellow wire)
• GND (Black wire)

An additional connector is shown labeled 'Analog RGB (VGA) out (NOT available on CP-11)'.

MAIN MENU UI

The Main Menu UI displays two primary screens.

Screen 1 (Launcher): Features a status bar at the top showing icons for Wi-Fi [Wi-Fi icon], sound volume [volume icon], Bluetooth [Bluetooth icon], and battery [battery icon]. The main area shows app icons for Music, CarPlay, Android Auto, and Bluetooth. Below these are labels: 'USB storage music', 'Apple CarPlay', 'Android Auto', 'Bluetooth*'. A note indicates '* Bluetooth is designed for Android Auto calling audio delivering'.

Navigation controls are labeled: 'Home' (? icon) and 'Back' (↩️ icon).

Screen 2 (Launcher): Also has a status bar. The main area shows icons for Bluetooth, Video, Video in, and Setting. Below these are labels: 'USB storage video', 'External video in', 'Settings'.

APPLE CARPLAY

To use Apple CarPlay:

• Plug in your iPhone with a USB cable.
• Select and enter CarPlay from the main menu.

NOTE: Please disconnect iPhone's Bluetooth before using Apple CarPlay.

Image Description: A screenshot shows the Apple CarPlay interface on a phone screen, displaying icons for Phone, Music, Maps, Messages, Now Playing, Home, Podcasts, and Audiobooks. The time is 4:56. A 'Back to main menu' button is indicated.

Controller Description: The external knob controller is shown with directional arrows, a central confirmation button, and other function buttons. Labels indicate:

• Accept calling
• Back
• Hang up
• Home
• Click as confirm / Long press 3S to activate Siri ?️

ANDROID AUTO

To use Android Auto:

• Plug in your Android smartphone with a USB cable.
• Select and enter Android Auto from the main menu.

NOTE: Make sure smartphone connects to this adapter's Bluetooth for phone call audio delivering before using Android Auto.

Image Description: A screenshot shows the Android Auto interface on a phone screen, displaying a music player with song title 'Bach Suite' by 'Cory J. Wong'. It shows playback controls (play/pause, skip). The time is 4:55. The screen is divided into 'A area' (top) and 'B area' (bottom navigation bar).

Controller Description: The external knob controller is shown with directional arrows and buttons. Labels indicate:

• Move menu-pointer to A area
• Pop up upper left menu
• Accept calling
• Move menu-pointer to B area / Back
• Activate Google Assistant ?️
• Hang up
• Home
• Click as confirm / Long press 3S to activate Google Assistant ?️

HOW TO CONNECT BLUETOOTH

Device name: Car Audio

Pair code: 0000

Image Description: Two Bluetooth connection screens are shown.

Screen 1: Shows 'Bluetooth is not connected'. Device name: Car Audio, Pair code: 0000. Options for 'Auto Connect' (ON) and 'Auto Answer' (ON) are visible. Buttons for Contacts, Recents, Keypad, Music, BT Setting are shown.

Screen 2: Shows a connected device 'DIG-AL00 Connected'. Options for 'Auto Connect' (ON) and 'Auto Answer' (ON) are visible. Buttons for Delete paired device and Disconnect BT are indicated.

Explanation:

• Auto Connect ON: mobile phone connects Bluetooth automatically after starting the adapter.
• Auto Answer ON: Accept calling automatically.

NOTE! Bluetooth function is designed for Android Auto call audio delivering. It's unnecessary to connect BT when using CarPlay on iPhone.

USB STORAGE MUSIC & VIDEO

This section describes playback of music and video files from a USB storage device.

Image Description: A music playback screen is shown, displaying the song 'Adele-Someone Like You' by Adele, track 1 of 17. The progress bar shows 00:07 out of 04:46. Playback controls are visible: Play mode, Previous, Pause/Play ▶️⏸️, Next, EQ setting, Open file.

Controller Description: The external knob controller is shown. Labels indicate:

• Exit: music & video stop playing
• Home: music & video continue to play in the background

SETTINGS