Wissenergy P60 Portable Charger Instruction Manual

1. Appearance Details of the Charger

The charger consists of the following components:

Diagram showing the charger components with labels 1 through 5.

The LED indicator on the in-cable box shows the charging status:

Diagram illustrating the LED indicator states for different charging conditions.

Insert the power plug into the power socket. The green light (Disconnected) will illuminate, indicating the start-up is complete.
Plug in the charging connector. The green indicator light (Connected) will illuminate.
Charging will begin automatically, and the green indicator light (Charging) will start rolling.
To stop charging, simply pull out the charging connector.

Note: The socket wire harness must have a cross-section greater than 2.5 mm².

Diagram showing the connection process of the electric vehicle and the charger.

QR code linking to detailed instructions.

Failure to follow the instructions may result in danger.
Please use the charging station only if it is in a technologically normal and safe condition.
Prevent children from accessing the charging station.
Install the charging station away from pyrotechnics, dust, and corrosive substances.
The output of the charging station is high voltage; exercise caution for your safety during use.
In case of a fault, electric shock or even death may occur. In emergency situations, disconnect the power supply.
Do not disassemble the charging station during charging.

Failure to follow the instructions may result in danger!
Regularly check the charging station for visible damage. Using a damaged charging station may cause electric shock.
Ensure that all safety devices are always available and test them regularly to ensure proper operation.
In case of a ground fault, it should be assumed that the base cable is live. After confirming that there is no high voltage in the system, check the charging station.
Installers and users must observe principles and regulations to ensure their safety and the safety of the equipment.
Before powering up the equipment, ensure it is properly grounded to avoid unnecessary accidents.
All tools that do not require exposed metal parts should be insulated to prevent exposed metal parts from touching the metal frame and causing a short circuit.
Do not modify, reconstruct, or change any part under any circumstances.
Before powering up the equipment, ensure that the input voltage, frequency, circuit breakers, and other conditions meet the specifications.
This product must be installed by authorized personnel.
Before using the product, check if it meets local regulatory requirements.
The recommended height for hanging the connector is 0.4-1.5 m above ground level.

Sunnysoft s.r.o.
Kovanecká 2390/1a
190 00 Praha 9
Czech Republic
www.sunnysoft.cz

	Wissenergy WB20 EV Charging Station User Manual This manual provides instructions for the Wissenergy WB20 EV charging station, including installation, usage, and safety guidelines. Learn how to charge your electric vehicle efficiently and safely.
	Wissenergy EV Charging Cable User Manual This manual provides instructions for the safe and effective use of the Wissenergy Electric Vehicle Charging Cable. It includes product specifications, usage guidelines, and safety warnings.