Photovoltaik Shop ☀️ Solar-Komplettanlagen | IsolarPro
Instruction Manual for iSolarPro models including: ASM-1 Universal Easy Solar Bracket, ASM-1, Universal Easy Solar Bracket, Easy Solar Bracket, Solar Bracket, Bracket
Balkonkraftwerk Easy Solar-Kit Universal Solarmodul-Halterung für Balk
File Info : application/pdf, 4 Pages, 1.85MB
DocumentDocumentINSTALLATION MANUAL Universal easy solar bracket www.isolarpro.de INSTALLATION INSTRUCTIONS 1.Application scenarios Allen Key 6mm M8 Hexagon Socket Screw 2.Application scenarios Tape 3.Packaging and details (Accessories are subject to the actual product) 13mm Spanner The way of packing Asm-1*2 Asm-2*3 Railing 01 Flat surface Accessories 02 4.Installation Instruction 4.1 Take out "ASM-1", loosen the bolts on L025 and end clamps, measure it with a tape to adjust spacing between end clamps equal to the width of solar panel. End clamp M8x16 M8x16 End clamp Note: solar module width range773A1303mm 1303 773 530 4.3 Loosen the M8x55 bolt, rotate the rear post, and install on the U-joint. B 4.4 Repeat steps 4.1 to 4.3, align with the first tripod to complete the installation of another set of tripod. 4.2 Loosen bottom M8x16 bolt, stretch and unfold. 03 04 4.5 Adjust the angle of the tripod and install the three crossbars with the M8x45 bolt. At this time, adjust the tripod and lock the bolts in each part. As shown in the figure below. 4.7 Loosen the end clamps to place the solar panel; After position is determined and then fix solar panel tightly. As shown in figure. 4.8 Completion. Use wire rope, lock catch and U bolts when it's installed on the railing. Note: When it's installed in railling, the hole on the side of L041 needs to face left and right; and when it's installed on the wall, the hole needs to face up. 4.6 Install micro inverters on the back and lock them with M8x55 bolts, as shown in figure. 05 06