Instructions for NATIONAL INSTRUMENTS models including: USB-6210, USB-6211, USB-6212, USB-6215, USB-6216, USB-6218, NI-6210, NI-6211, NI-6212, NI-6215, NI-6216, NI-6218, DAQ-6210, DAQ-6211, DAQ-6212, DAQ-6215, DAQ-6216, DAQ-6218, NI USB-621 Series Device Labels, NI USB-621 Series, Device Labels
USB-6216 National Instruments Multifunction I/O Device | Apex Waves
File Info : application/pdf, 3 Pages, 1.47MB
DocumentDocumentUSB-6216 NOTE TO USERS NI USB-621x Device Labels The NI USB-621x Accessory Kit contains four combicon connectors with screws, a screwdriver, and additional signal labels. Use the correct label for your USB device. Device Label Part Number USB-6210 195969 USB-6211 195968 USB-6212 198027 USB-6215 195968 USB-6216 198027 USB-6218 195967 P/N 195969A-01 REV2 msi 6000 You can choose labels with pin numbers or signal names, or blank labels. Choose one of the labels, align the correct label with the terminals printed on the top panel of your device or the 16-position combicon connector, and apply the label, as shown in the following figure. 1 or 2 or 3 or 4 P/N 19XXXX REVX msi 6000 1 or 2 or 3 or 4 1 Terminal Number Label 2 Single-Ended Signal Name Label 3 Differential Signal Name Label 4 User-Defined Custom Label National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies. For patents covering National Instruments products, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your CD, or ni.com/patents. © 20062007 National Instruments Corporation. All rights reserved. 372085B-01 Jun07