Manuals+

Installation Guide for NETGEAR models including: AGM731F, AGM732F, SFP 1G Fiber Module, Fiber Module, SFP 1G Module, Module, AGM731F Fiber Module

NETGEAR SFP 1G Module AGM731F and AGM732F Installation Guide

NETGEAR LC connector, transceiver module, NETGEAR fiber module, AGM731F, AGM732F

NETGEAR

Installation Guide

Netgear SFP 1G Ethernet Fiber Module for Managed Switches AGM731F - KOA E.D.I.

AGM731F AGM732F IG E..>

Index of /downloads


File Info : application/pdf, 2 Pages, 547.77KB

PDF preview unavailable. Download the PDF instead.

AGM731F AGM732F IG EN 
Installation Guide
SFP 1G Fiber Module
AGM731F and AGM732F

Install the module
1. Insert the module into a slot that supports the SFP interface. You will hear a click sound when the module is firmly seated.

The 1000Base-X SFP transceiver module provides full-duplex 1000Mbps Ethernet operation in each direction for NETGEAR managed switches.
The switch automatically detects the module, so you can simply plug it into an available module slot.
WARNING: Because invisible laser radiation might be emitted from the aperture of the port when no fiber cable is connected, avoid exposure to laser radiation and do not stare into open apertures.

2. Lift the latch on the module to lock it in place.
Remove the module
1. Lower the latch on the module to unlock it.
2. Grasp the sides of the module and pull it straight forward out of the slot.

Standards
Connectors
Dimensions (H x W x D)
Weight
Storage temperature Case operating temperature Operative relative humidity Operating distance multi-mode fiber (MMF)
Operating distance single mode fiber (SMF) Power consumption MTBF
Safety certification Environmental compliance

Technical Specifications AGM731F: IEEE 802.3z, 1000Base-SX AGM732F: IEEE 802.3z, 1000Base-LX AGM731F: LC for 62.5/125µm or 50/125µm cable AGM732F: LC for 9/125µm cable AGM731F: 2.23 x 0.53 x 0.34 in (56.8 x 13.6 x 8.6 mm) AGM732F: 2.26 x 0.53 x 0.33 in (57.4 x 13.4 x 8.5 mm) AGM731F: 0.58 oz (16.3 g) AGM732F: 0.56 oz (16.0 g) ­40­185ºF (­40­85ºC) 23­158ºF (­5­70ºC)
85% at 77ºF (25ºC)
AGM731F: OM1: 900 ft (275 m) OM2: 900­1,800 ft (275­550 m) OM3: 1,800 ft (550 m) AGM732F: 6 mi (10 km)
1.1W AGM731F: >10 years AGM732F: >10 years UL 60950-1, CSA-C22.2 No.60950-1 RoHS

June 2022

© NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non-NETGEAR trademarks are used for reference purposes only.

Support and Community
Visit netgear.com/support to get your questions answered and access the latest downloads.
You can also check out our NETGEAR Community for helpful advice at community.netgear.com.
Regulatory and Legal
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français canadien à https://www.netgear.com/support/download/.
(If this product is sold in Canada, you can access this document in Canadian French at https://www.netgear.com/support/download/.)
For regulatory compliance information including the EU Declaration of Conformity, visit https://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
For NETGEAR's Privacy Policy, visit https://www.netgear.com/about/privacy-policy.
By using this device, you are agreeing to NETGEAR's Terms and Conditions at https://www.netgear.com/about/terms-and-conditions. If you do not agree, return the device to your place of purchase within your return period.
Do not use this device outdoors.
Applicable to 6 GHz devices only: Only use the device indoors. The operation of 6 GHz devices is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems.

NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134, USA

NETGEAR INTERNATIONAL LTD Floor 1, Building 3 University Technology Centre Curraheen Road, Cork, T12EF21, Ireland

References

Adobe PDF Library 16.0.7