Instruction Manual for KASTA models including: KASTA-D1-10VIB Smart 0-10V Dimmer, KASTA-D1-10VIB, Smart 0-10V Dimmer, 0-10V Dimmer, Dimmer

C INSTRUCTION KASTA-DH1-10VIB- REV4 06092023-V3

KASTA-DH1-10VIB-Instructions

KASTA-D1-10VIBH Kasta 1-10V Dimmer Module, Dimmers & Switches | Wagner Online Electronic Stores


File Info : application/pdf, 1 Pages, 356.79KB

PDF preview unavailable. Download the PDF instead.

C INSTRUCTION KASTA-DH1-10VIB- REV4 06092023-V3-1
Installation Instructions

FEATURES
· Smart functions via phone/tablet with the app such as schedules, timers, scenes and groups. · Dimmable (via KASTA app, KASTA remotes, KASTA SLO2AB-BH or Push button momentary
switch only). · To prevent a reduction in Bluetooth signal strength, install with line of sight between devices if
possible. · 0-10V output signal suitable for 0-10V LED driver. · Controls the output according to the Bluetooth® signal received from the daylight sensor.

Smart 0-10V Dimmer
Product Code: KASTA-D1-10VIB
APP Installation
Visit www.kasta.com.au or your app store to download the free KASTA app. iOS: requires iOS 9.0 or later. Android: requires Android 4.4 or later. Devices must support Bluetooth 4.0
Important Safety Informatioin
·This product must be installed by a licensed electrician in accordance with all the require ments of AS/NZS 3000 (current edition) and other relevant Standards and Regulations. ·Electricity MUST be disconnected prior to installation. Failure to do so may result in serious injury and or loss of life. ·Indoor use only. Not suitable for damp or explosive environments ·Complies to Australian Standards AS/NZS 60669.2.1:2013 with AS/NZS 60669.1:2013 (IEC 60669-2-1 Ed. 4.1 MOD with IEC 60669-1 Ed.3.2 MOD). ·No user serviceable parts inside.

FUNCTION SETUP
(using smart remote switch or momentary switch)
ON/OFF SWITCH

SHORT PRESS

Turns lights on or off. DIM UP/DOWN

ONE LONG PRESS

When lights are on, long press button to dim up or down. Release button to stop.
FULL BRIGHTNESS

2 CLICKS

Sets lights to full brightness. ADD DELAY TO OFF

3 CLICKS*

Lights automatically turns off after set time.

RESTORE TO FACTORY SETTINGS

9 CLICKS

Reset password to the default setting. *If successful, light will pulse the number of times that the switch was clicked, indicating function.

TECHNICAL SPECIFICATIONS
Supply: 220-240V~50/60Hz Operating Frequency: 2.4Ghz Output Current (Max.): 40mA Operating Temp: -20ºc to 50ºc Dimming Method: 1-10V IP Rating: IP20 Maximum Number of Drivers: 30 Dimensions: 45x45x25mm

CONNECTION DIAGRAM

A N

1-10V HIGHBAY

A N

1-10V

DRIVER

+ -

SMART 1-10V DIMMER

A
N T1 T2

+ -

BATTERY POWERED SWITCH
(KASTA-RB02-W)

A N E
DAYLIGHT SENSOR (KASTA-SL02AB-BH)

MOMENTARY PUSH BUTTON
(If required to reset device or if hard wired switch is required)

ver 1.4

kasta.com.au | (02) 9168 5900



References

Adobe PDF library 17.00 Adobe Illustrator(R) 24.0