Kooduu Synergy S-Series: Operating Manual
Model: Kooduu Synergy S-SERIES
Version 1.2, 2019
Introduction
Thank you for purchasing the Kooduu Synergy S-series. This product complies with statutory national and European requirements. To maintain this status and ensure safe operation, you, as the user, must observe these operating instructions. These instructions are part of the product and contain important notes on commissioning and handling. Please retain them for future reference.
1. Intended Use
The Kooduu Synergy S-series is intended as a lifestyle product, serving as a multifunctional speaker and light. Its top chamber can be used for chilling wine or as a planter. Any use other than described above can damage the product and lead to dangers such as short circuits, fire, or electric shock. Modifications or conversions to the product are not permitted.
2. Box Contents
- Floor Bluetooth speaker and LED light
- Operating Manual
- USB cable
- Power Adapter
- Support Stands
- Screws
3. Safety Information
Failure to comply with these instructions may void the warranty and absolve Kooduu of liability for consequential damages, property damage, or personal injury. Always observe safety information:
- Unauthorized conversion or modification is prohibited.
- The product is for dry areas only. Avoid prolonged exposure to direct sunlight, heat, cold, dampness, or wetness.
- Risk of fire or electric shock: If this occurs, switch off the power at the socket, unplug the adapter, and disconnect all cables. Do not operate the product further and contact your dealer or Kooduu via https://www.kooduu.com/return-policy/.
- Do not place open flames, such as candles, on the device.
- Handle with care; avoid impacts, blows, or drops.
- Note: The handle and aluminum ring are not waterproof and must be kept dry.
- This product is not a toy and not suitable for children.
- Do not leave packaging material unattended.
- Observe safety and operating instructions for connected devices.
4. Product Overview
Key Functions & Bottom:
- A1: On/Off switch
- A2: USB charging port
Charging:
- B1: USB cable
- B2: USB power adapter
Assembly Parts:
- C1: Support Stands
- C2: Screws
LED Indicator:
- D1: Charging LED
- D2: Mode LED
5. Setup Mono Speaker (Single-Unit) Connection
- Before first use, turn off the Bluetooth function of any other Bluetooth devices near the speaker.
- Press and hold the On/Off key (A1) for about 3 seconds. You will hear a start-up sound, and the blue LED indicator (D2) will flash.
- Short press the On/Off key (A1) once.
- Turn on Bluetooth on your mobile device. Search for "Synergy (35s)/(50s)/(65s)" in discoverable devices and pair with the unit. The blue indicator light (D2) will turn off, indicating a successful connection.
6. Setup Stereo Speaker Connection
- Before first use, turn off the Bluetooth function of any other Bluetooth devices near the speakers.
- If you have purchased two Kooduu Synergy S-series products and wish to pair them, press and hold the On/Off switch (A1) for about 3 seconds on the first unit, then repeat for the second unit. A start-up tone will sound, and the blue LED indicator (D2) will flash on both units.
- Double press the On/Off button (A1) on one unit. This unit becomes the LEFT channel speaker.
- Allow the second unit to automatically connect to the LEFT channel speaker. A "beep" tone will sound upon successful connection, and the blue indicator light (D2) on the second unit will turn off. This unit is now the RIGHT channel speaker. The blue LED indicator (D2) on the LEFT channel speaker will continue to flash.
- Turn on Bluetooth on your mobile device. Search for "Synergy (35s)/(50s)/(65s)" and pair with the LEFT channel speaker unit. The blue LED indicator (D2) on the LEFT channel speaker will then turn off.
7. Pairing to a New Phone
- Press the On/Off key (A1) once on any Kooduu Synergy S-series product. A tone will be heard, and the blue LED indicator (D2) will start flashing, indicating it is disconnected from the previous phone.
- Turn on Bluetooth on your mobile device. Search for "Synergy (35s)/(50s)/(65s)" and pair with the unit. The blue LED indicator (D2) on the LEFT channel speaker unit will turn off.
8. Changing from Stereo to Mono Speaker
Press the On/Off key (A1) twice on any connected Kooduu Synergy S-series product. The connection between the units will be disconnected. A tone will be heard, and the blue LED indicator (D2) will flash on both units.
9. Charging
Lift the small silicone part on the bottom of the product and insert the USB jack into the USB port (A2). For first-time use, it is recommended to leave the USB jack plugged in for a minimum of 12 hours to fully charge the internal battery.
General Notes
- For optimal experience, keep your mobile device within 3-5 meters of the LEFT channel speaker unit.
- Position the two units in the same room or outdoor area within 3-5 meters of each other, free from obstructions.
- Performance may vary based on device, distance, and environmental factors.
10. Maintenance and Cleaning
Servicing or repair must only be carried out by a specialist or authorized workshop. The product contains no user-serviceable parts. Never open the product, except for procedures described in this manual.
Clean the exterior with a dry, soft, and clean cloth. Never use aggressive cleaning agents, alcohol, or other chemical solutions that could damage the casing (discoloration).
11. Disposal
a) Product: Electronic devices are recyclable waste and must not be disposed of with household waste. At the end of its service life, dispose of the product according to relevant statutory regulations. Remove any inserted batteries/rechargeable batteries and dispose of them separately.
b) Batteries and Rechargeable Batteries: Users are legally required to return used batteries/rechargeable batteries. Disposal in household waste is prohibited. Batteries containing hazardous substances are marked with a symbol indicating prohibition of disposal in household waste (e.g., ?). Labels for heavy metals include Cd (cadmium), Hg (mercury), Pb (lead). Return used batteries/rechargeable batteries free of charge at official collection points, stores, or retailers.
Declaration of Conformity
Nomenta Industries International B.V. declares that the radio equipment type 'Synergy S-series' complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: https://kooduu.com/ec-declaration-of-conformity.
Related Documents
![]() |
Kooduu Synergy PRO Bluetooth Speaker with LED Light and Wine Cooler User Manual This manual provides instructions for setting up, operating, and maintaining the Kooduu Synergy PRO Bluetooth speaker, which also features an LED light and wine cooler. It covers safety information, product overview, pairing instructions for mono and multiple units, volume control, charging, maintenance, and disposal. |
![]() |
Kooduu Synergy 35/50/65 Quick Start Guide A quick start guide for the Kooduu Synergy 35/50/65, detailing how to power on/off, connect via Bluetooth, play music, adjust lighting, charge the device, understand LED status, and perform pairing/reset functions. |
![]() |
Kooduu SYNERGY / ATMOS / SPHERE LITE-UP PLAY / LITE-UP PLAY MINI SENSA Safety Information This document provides essential safety information for Kooduu SYNERGY, ATMOS, SPHERE, LITE-UP PLAY, LITE-UP PLAY MINI, and SENSA devices. It covers important warnings, precautions, and guidelines to ensure safe operation and prevent potential hazards. |
![]() |
Kooduu Sphere Quick Start Guide Quick start guide for the Kooduu Sphere speaker, covering pairing, Bluetooth connection, music playback, light control, charging, and reset functions. |
![]() |
Kooduu Lite-up Play by JBL Quick Start Guide A concise guide to setting up and using the Kooduu Lite-up Play speaker, featuring JBL sound. Learn how to pair devices, control lighting, and manage playback. |
![]() |
Kooduu Lite-up Play Mini by JBL Quick Start Guide A concise guide to setting up and using the Kooduu Lite-up Play Mini speaker, featuring Bluetooth connectivity, light dimming, and charging instructions. |
![]() |
Kooduu Sensa Quick Start Guide A concise guide to setting up and operating the Kooduu Sensa lamp, including connection and brightness adjustment instructions. |