PRODUCT MANUAL

Instructions

Getting the App

To get the app, please search for "scent marketing" in the Google Play Store or Apple App Store.

Device Setup and Operation

The device can be added via the app. You can set the device name, label, and remarks (e.g., location).

You can add up to five working periods. Each period can be configured with a start time, end time, and specific days of the week (Monday to Sunday). For example, a working period can be set from 07:00 to 21:00, Monday through Friday.

Important Note: After adjusting the scent grade, please save the settings before returning to the home page.

Password Management

You will need to input a password to log in. The password can be amended via the "Amend password" section. If you forget your password, press the reset button to restore factory settings. The default factory password is 8888.

Reminding Indicator

The Bluetooth indicator on the device provides status updates:

• Catch the signal: Flashing light
• Connected: Solid light
• Disconnected: Light off

Concentration and Consumption

The device offers different scent grades (G1 to G10) which affect the diffusion intervals and oil consumption. The table below outlines these details:

Notes:

1. 100ml oils can typically diffuse 6300-6700 times under normal circumstances.
2. The atomization work time for all grades is 3 seconds.
3. Oil consumption may vary depending on the grade and the type of oil used.

Specifications

Product Details

• Product: AE105-APP
• Size: 148mm x 60mm x 160mm
• Volume: 100ml
• Weight: 381g
• Coverage: 100m³
• Power: Battery (2 x 1.5V) or USB 5V

Warnings

1. Please keep the machine vertical. Tilting or lying the machine flat may cause oil overflow and affect its efficiency.
2. Do not modify, disassemble, or repair the machine yourself. If any failures occur, please contact technical personnel.
3. When the machine is first used, or if it hasn't been used for more than 7 days, the controlling board may lose power. Insert batteries or plug in the USB cable and wait for 1-2 minutes for the machine to restart automatically.

Equipment Cleaning

The machine requires cleaning in the following situations:

• When you are about to change to a different type of essential oil.
• When the atomization volume becomes weak.

Cleaning Steps:

1. Pull out the atomized head and loosen the bottle.
2. Refill the bottle with approximately 15% industrial alcohol and let it diffuse for 5-10 times.
3. Air out the atomized head and the bottle.

Installation

Components

The device package typically includes the main unit, fragrance bottle, key, screws, and 3M tape. Optional accessories may include a mounting bracket and USB cable.

Mounting Instructions

Attaching the Atomizer Head and Bottle:

1. Insert the key into the unit and turn it to "OPEN". Pull the unit apart. Press the fixed button on the top and push forward to separate parts.
2. Connect the atomizer head securely to the fragrance bottle, then install them into the machine.
3. Choose the power mode: "Power mode" (using batteries) or "Battery mode" (plugging in via USB). If using USB power, wait approximately 12 minutes for the machine to charge fully on the first connection.
4. Insert the key into its mating part, then insert it into the keyhole and turn to "CLOSE" to lock.

Wall Mounting:

1. Fix three screws to the wall at the desired location.
2. Hang the machine onto the screws.

Note on 3M Tape: If using 3M tape instead of screws for wall mounting, press the tape firmly onto the wall for 1 minute before hanging the machine.

Troubleshooting

Before seeking repair, please try to diagnose the problem using the following guide: