Build something beautiful.
To get started, follow the instructions at coral.ai/docs/setup/
Connectors & Ports
- Camera
- Privacy LED
- Microphone
- TPU activity LED
- User-defined switch
- User-defined LED
- USB-C power/data
- System LED
- High-density connector GPIO
- High-density connector
- Reset switch
- GPIO
Google AI Principles
Google's AI Principles guide all of our work. We hope they will guide your work too. See them at ai.google/principles
Regulatory Information
Manufacturer
Google LLC, 1600 Amphitheatre Parkway, Mountain View, CA, USA, 94043
Importer of Record
For contact information for the importer for your region, see coral.ai/legal/
FCC Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by Google could void your authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
EU Declaration of Conformity
Google LLC hereby declares device model VA1 is in compliance with Electromagnetic Compatibility Directive 2014/30/EU. The full text of the EU declaration of conformity is available at coral.ai/legal/
(Note: Declarations also provided in French, German, and Spanish.)
UKCA Declaration of Conformity
Google LLC hereby declares device model VA1 is in compliance with Electromagnetic Compatibility Regulations 2016. The full text of the UKCA declaration of conformity is available at coral.ai/legal/
The European Union Waste Electrical and Electronic Equipment (WEEE) Directive
Your Dev Board Micro is marked with the symbol of the [crossed-out wheeled bin symbol], which means the equipment should be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities for safe disposal or recycling. The separate collection and recycling of your product and its electrical accessories will help conserve natural resources, protect human health, and help the environment.
Recycling, E-waste Management and Handling
Your Dev Board Micro is marked with the symbol of the [crossed-out wheeled bin symbol]. This label indicates that this product should not be thrown away with household waste. It should be deposited at an appropriate facility to allow recovery and recycling. Google declares that your Dev Board Micro has been designed and manufactured in compliance with E-Waste (Management) Rules, 2016 (hereafter "the Rules"), and is specifically in compliance with Rule 16 (1) on the reduction in the use of hazardous substances in the manufacture of electrical and electronic equipment and their maximum allowed concentrations by weight in the homogeneous materials (except for the exemptions listed in schedule II). Improper handling, disposal, accidental breakage, damage or improper recycling of e-waste may present risks, including, but not limited to, fire, explosion and/or other hazards and uncontrolled waste disposal which may be detrimental to/ have adverse effects on the environment as it prevents reuse of resources. Some e-waste may contain hazardous chemicals which, if disposed improperly, may make water, soil and other natural resources toxic. Improper disposal may cause harm to plant, animal and human life.
REACH
Google complies with the REACH (Registration, Evaluation, Authorization and Restriction of Chemicals, EC No 1907/2006) regulation and your Dev Board Micro does not contain any Substances of Very High Concern (SVHCs) beyond the limits of this regulation. For information, contact Google at coral-compliance@google.com.
Hazardous Applications Prohibited
The Dev Board Micro is not designed, recommended or authorized for any of the following applications: high-risk applications such as safety, life support, surgical implant, nuclear, or aircraft applications, or for any use or application in which the failure of a single component could cause substantial harm to persons or catastrophic property loss; or for any military or weaponry use, including but not limited to chemical, nuclear, biological, aircraft, missiles, and similar military applications.
Safety Warning Notice
To reduce the possibility of heat-related injuries or of overheating your Dev Board Micro, do not place it near heat sources such as radiators or stoves and do not cover it with soft surfaces, such as pillows, rugs or clothing. Also, do not allow the Dev Board Micro to contact the skin or flammable materials during operation.
If you have safety concerns or notice crackling, hissing, popping, or a strong odor or smoke coming from your Dev Board Micro, do not use it. Turn off your Dev Board Micro, disconnect it from its power source, and contact technical support for assistance.
Restricted Substances and Chemical Symbols
Subcomponent | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (Cr+6) | Polybrominated Biphenyls (PBB) | Polybrominated Diphenyl Ethers (PBDE) |
---|---|---|---|---|---|---|
PCB substrate | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Fan | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Heatsink | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Ethernet connector | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Notes:
- Note 1 - "Exceeding 0.1% weight" and "exceeding 0.01% weight" indicates the percentage of the restricted substance exceeds the reference value.
- Note 2 - "✓" indicates the percentage of the restricted substance does not exceed the reference value.
- Note 3 - "-" indicates the restricted substance is exempt.
Product Information
Dev Board Micro
Model (Type): VA1 (Dev platform)
Get started at coral.ai/docs/setup/
Single-board MCU with Edge TPU