VCM Rasato XL Shelf Assembly Instructions

Important Safety Information

German: ACHTUNG: Das im Lieferumfang enthaltene Befestingungsmaterial zur Wandmontage ist nur Vollstein-Mauerwerk geeingnet!

English: Attention: The fastening material for wall mounting included in the scope of delivery is only suitable for solid brick masonry.

Parts and Hardware

Hardware Components

• Item 1.7: 12 x Small screws (approx. 3.5x16mm)
• Item 1.6: 2 x Medium screws (approx. 6x30mm)
• Item 1.33: 2 x Longer screws (approx. 4x35mm)
• Item 1.8: 1 x Wooden dowel (approx. 8mm diameter)
• Item 1.32: 8 x Wooden dowels (approx. 5x30mm)
• Item 1.18: 48 x Metal cam lock bolts
• Item 1.5: 32 x Metal cam lock bolts
• Item 1.3: 4 x Metal cam lock bolts
• Item C1: 2 x Wooden dowels (approx. 8mm diameter)
• Item D1: 2 x Screws (approx. 5x30mm)

Panel Components

Assembly Steps

1. Step 1: Assemble Base and Side Panels

   Connect the base panel (part 4) to the side panels (parts 1L and 1R) using dowels (item 1.8) and screws (item 1.7). Subsequently, connect the other side panels (parts 2L and 2R) to the central support panel (part 3) using dowels (item 1.32) and cam lock bolts (item 1.18).

2. Step 2: Insert Shelves

   Place the shelves (part 5) into the designated pre-drilled holes on the interior of the assembled side panels.

3. Step 3: Attach Back Panel

   Secure the back panel (part B) to the rear of the unit. This is typically done using small nails or screws, as suggested by the hammer icon (item 1.3) in the diagrams.

4. Step 4: Final Unit Check

   Verify that all components are correctly installed and the shelf unit is stable and secure.

5. Step 5: Wall Mounting Advisory

   Reiterate the caution: the provided wall mounting hardware is suitable only for solid brick masonry.