Linx Eden Switch User Manual

[Geometric Lynx Logo]

What's Included

Device Components

The Linx Eden Switch features an LED Light Indicator (displaying status and battery life), a Power Button, a Quartz Dosing Capsule, a Filter Housing, a Mouthpiece Fitting, a Mouthpiece (which can hold a Glass Mouthpiece), and a Magnetic Mouthpiece Cap.

Charging

Step 1

Plug one end of the USB-C charging cable into the bottom of the device and the other end into a power source (USB-C port).

Step 2

The power indicator will blink white while charging and turn solid when fully charged. A full charge takes approximately 3-4 hours.

Power On/Off

Step 1

Press the power button 5 times quickly to turn the device ON or OFF.

Step 2

The device will automatically start to heat up to its set temperature.

Step 3

Once the set temperature is reached, the device will vibrate once and remain ON for 4 minutes before automatically turning off.

Loading

Step 1

Unscrew the mouthpiece from the device.

Step 2

Load ground material into the Quartz Dosing Capsule.

Step 3

Screw the mouthpiece back onto the device. Do not overpack the Quartz Dosing Capsule, as this may restrict airflow.

Vaping

Step 1

Load ground material into the Quartz Dosing Capsule (see 'LOADING').

Step 2

Turn the device ON (see 'POWER ON/OFF').

Step 3

Inhale with a slow, steady draw.

Power Boost

The Power Boost function can be activated once the device reaches its set temperature or by holding down the power button. Holding the button down increases the chamber's internal temperature by 20°F (7°C) per second. Release the button to turn off Power Boost when the desired temperature is reached.

CAUTION: Mouthpiece may get hot. Let the device cool before next use.

Cleaning

Step 1

Ensure the device is powered OFF and cool to the touch.

Step 2

Unscrew the Filter Spring from the mouthpiece by gently separating it from the mouthpiece base.

Step 3

With the Filter Spring disassembled, gently separate the Filter from the Spring into two pieces by unscrewing the Filter from the Spring connection.

Step 4

Soak the Filter and Filter Spring in Isopropyl Alcohol. Gently clean the pieces with a Cotton Swab and allow them to air dry.

Step 5

Clean all surfaces of the mouthpiece with Isopropyl Alcohol and Cotton Swabs. Unscrew the Dosing Capsule Seal and remove the Quartz Dosing Capsule.

Step 6

Clean the interior of the chamber with Isopropyl Alcohol and Cotton Swabs.

Step 7

Using the included Cleaning Brush, sweep out any leftover material and clean the Quartz Dosing Capsule with a clean Cotton Swab.

Temperature Settings

Press the power button 3 times quickly to cycle between temperatures:

Battery Life Indicator

The LED lights display battery life once the device reaches its set temperature:

Low Power

The device will blink white 10 times to indicate low battery power. Fully charge the battery before the next use.

Safety Warnings

Safety Disclaimer

Legal Disclaimer

Do not allow children, pregnant or breastfeeding women, or individuals with life-threatening illnesses to use this device. Linx Vapor and its affiliates are not responsible for any damage or personal injury caused by inappropriate, incorrect, or irresponsible use of the device.

This device is not a medical device and is not intended to diagnose, cure, treat, or prevent any disease or other conditions. If you have any health problems, consult your doctor before using this device.

This device is not intended to administer medicinal or illegal products of any kind, as doing so voids the warranty. Any illegal use of this device could subject the user to severe fines, penalties, and/or imprisonment under the law of local jurisdiction.

Additional Information

This product is for users aged 21+ ONLY.

Certifications: FC, CE, ROHS

Connect with Linx Vapor on social media: @LINXVAPOR

Visit our website: LINXVAPOR.COM

Models: Tools420 Eden Switch, Tools420, Eden Switch, Switch

File Info : application/pdf, 16 Pages, 3.75MB

PDF preview unavailable. Download the PDF instead.

LINX EDEN SWITCH (01)

References